Whirlpool Refrigerator Wheels and Rollers
Find your part
Enter your model number or a part number and click "Search"
Popular Whirlpool Refrigerator Wheels and Rollers
Ice Auger Motor Shaft
PartSelect Number PS11739142
Manufacturer Part Number WP2188917
This part is the drive shaft for the auger.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- See more...
Installation Instructions
terry from panama city beach, FL
Your Price
$53.03
In Stock
Single Roller - Left Front
The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes, I needed to shim up the side of the fridge that I was working on.
To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet. Read more...
PartSelect Number PS11755876
Manufacturer Part Number WPW10515763
Sold individually.
Installation Instructions
Daniel from BOCA RATON, FL
Original bracket foot brake screw hole was stripped and foot brake would not extend
The repair seemed simple, I just needed to remove the old bracket -- 4 screws -- and slip the new one on.The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes, I needed to shim up the side of the fridge that I was working on.
To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet. Read more...
Your Price
$53.19
In Stock
Single Roller - Right Front
PartSelect Number PS11755875
Manufacturer Part Number WPW10515762
Sold individually.
Your Price
$9.52
In Stock
Single Roller
Locate and remove the wheel leveling screw from the front bottom corner.
Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.
Lift out the wheel assembly.
Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.
Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.
Reinstall and adjust wheel assembly. Read more...
PartSelect Number PS11738235
Manufacturer Part Number WP10450603
This wheel is sold individually. It is located on the bottom of the refrigerator.
Installation Instructions
mike from holly springs, NC
Left front plastic wheel was broken
Pop loose the plastic grate at the bottom.Locate and remove the wheel leveling screw from the front bottom corner.
Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.
Lift out the wheel assembly.
Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.
Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.
Reinstall and adjust wheel assembly. Read more...
Your Price
$33.67
In Stock
Front Roller
PartSelect Number PS11738962
Manufacturer Part Number WP2166108
Sold individually. Hardware not included. Roller only.
Installation Instructions
Tony from Chicago, IL
Right front wheel broke
Definatly a two man job. I suggest you put a pad down to protect your floor. Remove the filter, grill, and bolts per instructions. Everything is straight forward. Move the frame back 1/2 to 1 inch then tilt the frig back on it's side about 4 inches. If the frame doesn't drop down, move it back until the front of the frame comes of the front lip of the frig. Place a block under the frig lip NOT the frame and WATCH YOUR FINGERS. The wheel should be hanging down. Just pull out the pin, replace the wheel (make sure you have it facing the correct way) and tilt back and pull the blocks. Move the frig back in place and replace the bolts. Took me and a buddy less than 30 minutes.
Read more...
Your Price
$28.74
In Stock
ROLLER-CAB
PartSelect Number PS11755335
Manufacturer Part Number WPW10475495
Sold individually.
Installation Instructions
Hans from OGDEN, UT
Raise side of fridge and slide 2x4 under side with broken wheel.
Remove back side cardboard access cover. About 6 dcrews need to be removed. Remove 9/16” bolt and lower compressor tray frame down to slide out wheel axel. Place wheel in slot and replace axel. Lift compressor tray and replace 9/16” bolt. Replace cardboard cover. Remove 2x4.
Read more...
Axle
PartSelect Number PS11751309
Manufacturer Part Number WPW10257246
Sold individually.
Installation Instructions
Kent from OVIEDO, FL
Ordered new crisper pin for refrigerator
After finally getting the wright parts sent to me I took out old bin added the parts to the new bin slid it in and I’m done.
Read more...
Your Price
$82.85
In Stock
Refrigerator Front Roller Kit
Thanks Read more...
PartSelect Number PS370711
Manufacturer Part Number 4386774
Support wheel assembly with bracket. Kit of 2.
Installation Instructions
Jeff from Midway, GA
Front wheel was broken when moving refrigerator
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it fixed in less than 15 minutes. I would recommend parts select to anyone who told me that they had a appliance broken.Thanks Read more...
Single Wheel Assembly
PartSelect Number PS11738549
Manufacturer Part Number WP12580304
This wheel is sold individually - purchase quantity needed.
Related Parts
- All Whirlpool Refrigerator parts
- Whirlpool Refrigerator Brackets and Flanges
- Whirlpool Refrigerator Caps and Lids
- Whirlpool Refrigerator Circuit Boards and Touch Pads
- Whirlpool Refrigerator Compressors
- Whirlpool Refrigerator Deflectors and Chutes
- Whirlpool Refrigerator Dispensers
- Whirlpool Refrigerator Doors
- Whirlpool Refrigerator Drawers and Glides
- Whirlpool Refrigerator Drip Bowls
- Whirlpool Refrigerator Ducts and Vents
- Whirlpool Refrigerator Elements and Burners
- Whirlpool Refrigerator Fans and Blowers
- Whirlpool Refrigerator Filters
- Whirlpool Refrigerator Grilles and Kickplates
- Whirlpool Refrigerator Handles
- Whirlpool Refrigerator Hardware
- Whirlpool Refrigerator Hinges
- Whirlpool Refrigerator Hoses and Tubes
- Whirlpool Refrigerator Ice Makers
- Whirlpool Refrigerator Insulations
- Whirlpool Refrigerator Knobs
- Whirlpool Refrigerator Lights and Bulbs
- Whirlpool Refrigerator Motors
- Whirlpool Refrigerator Power Cords
- Whirlpool Refrigerator Seals and Gaskets
- Whirlpool Refrigerator Springs and Shock Absorbers
- Whirlpool Refrigerator Switches
- Whirlpool Refrigerator Tanks and Containers
- Whirlpool Refrigerator Thermostats
- Whirlpool Refrigerator Trays and Shelves
- Whirlpool Refrigerator Trims
- Whirlpool Refrigerator Valves
- Whirlpool Refrigerator Wire Plugs and Connectors