Whirlpool Refrigerator Brackets and Flanges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos

Popular Whirlpool Refrigerator Brackets and Flanges
Your Price
$19.42
In Stock
Control Bracket
PartSelect Number PS11739027
Manufacturer Part Number WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Not dispensing water
- See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
Read more...
Your Price
$7.95
In Stock
Ice Maker Cover Bracket
PartSelect Number PS11739245
Manufacturer Part Number WP2198641
This is the replacement ice maker cover bracket for your refrigerator. It is made of white plastic and is approximately 5 inches wide and 2 inches long. The ice maker cover bracket holds and supports the ice maker cover. If the ice maker cover is loose or missing, you may need to replace the bracket. You will also want to replace the bracket if it will not stay in place, or if it is cracked or broken. To replace the cover bracket, simply remove the ice maker cover, then use a ¼ inch nut driver to loosen and remove the bracket. Screw in the new bracket and replace the cover to complete your repair. This is an OEM part that is sold individually.
Fixes these symptoms
- Ice maker not making ice
- See more...
Installation Instructions
brian from fresno, CA
broke tab on cover bracket
removed old bracket and replaced with new one - two screws and it was done - simple
Read more...
Holder
PartSelect Number PS11739144
Manufacturer Part Number WP2188919
Fixes these symptoms
- Ice maker won’t dispense ice
- See more...
Installation Instructions
Paulette from SMYRNA, TN
Ice maker wouldn't work
Simply took out old part, paying attention to how it comes out. Simply put the seal in, followed by the shaft and then place holder on and screw down with the two screws that were with the old part. Abrakadabra! Ice maker working like new!
Read more...
Mounting Bracket
PartSelect Number PS11739699
Manufacturer Part Number WP2212322
This bracket is used for the ice maker.
Coupling Holder
PartSelect Number PS11739703
Manufacturer Part Number WP2212369
Installation Instructions
John from Poway, CA
Plastic holder was cracked and broken
I removed the Ice container, removed the two screws that secure the holder, replaced the broken holder with the new one, replaced the screws, and put the ice container back in place. Total time, two minutes.
Read more...
Bracket, Dispenser
I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...
PartSelect Number PS11740253
Manufacturer Part Number WP2304673
Installation Instructions
Sean from Boise, ID
Water dispenser hose tip broken.
The part to fix this was a $50.00 part. I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...
Related Parts
- All Whirlpool Refrigerator parts
- Whirlpool Refrigerator Caps and Lids
- Whirlpool Refrigerator Circuit Boards and Touch Pads
- Whirlpool Refrigerator Compressors
- Whirlpool Refrigerator Deflectors and Chutes
- Whirlpool Refrigerator Dispensers
- Whirlpool Refrigerator Doors
- Whirlpool Refrigerator Drawers and Glides
- Whirlpool Refrigerator Drip Bowls
- Whirlpool Refrigerator Ducts and Vents
- Whirlpool Refrigerator Elements and Burners
- Whirlpool Refrigerator Fans and Blowers
- Whirlpool Refrigerator Filters
- Whirlpool Refrigerator Grilles and Kickplates
- Whirlpool Refrigerator Handles
- Whirlpool Refrigerator Hardware
- Whirlpool Refrigerator Hinges
- Whirlpool Refrigerator Hoses and Tubes
- Whirlpool Refrigerator Ice Makers
- Whirlpool Refrigerator Insulations
- Whirlpool Refrigerator Knobs
- Whirlpool Refrigerator Lights and Bulbs
- Whirlpool Refrigerator Motors
- Whirlpool Refrigerator Power Cords
- Whirlpool Refrigerator Seals and Gaskets
- Whirlpool Refrigerator Springs and Shock Absorbers
- Whirlpool Refrigerator Switches
- Whirlpool Refrigerator Tanks and Containers
- Whirlpool Refrigerator Thermostats
- Whirlpool Refrigerator Trays and Shelves
- Whirlpool Refrigerator Trims
- Whirlpool Refrigerator Valves
- Whirlpool Refrigerator Wheels and Rollers
- Whirlpool Refrigerator Wire Plugs and Connectors