EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Whirlpool Refrigerator Doors

Popular Whirlpool Refrigerator Doors

This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when you close the door. If your refrigerator door will not close properly, you may need to replace the pivot block. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when you close the door. If your refrigerator door will not close properly, you may need to replace the pivot block. This part is sold individually and is an OEM part sourced directly from the manufacturer.
What this part fixes:
  • Door won’t open or close
Installation Instructions
Elijah from Killeen, TX
I had several broken appilances broken with parts to be replaced.
I had ordered the parts from Part Select and came with in a week. I ahd a Whrilpool microwave that had a door panel and vent grille that needed to be replaced and that was rplced with ease took less that five minutes to do. My Maytag refridgerator had it kickplate grille replace along with the pivot block that took all of about two minutes. The longest job that took about 5 minutes was my Whirlpool glass oven door that needed to be replaced, but that was pretty ease to replace also with an extra hand from my son. I just didn't want to break another glass door or I would have done it myself plus I was teaching him how to do self reparts.
This black refrigerator door mullion rail seals the center gap between French doors. The hinged strip folds into place as the door closes, providing a surface for the door gaskets to seal against. Its internal heater helps reduce condensation along the center seam. Cracked housing, worn hinges, or a failed heater may cause poor closure, air leaks, or moisture buildup. Replacing a damaged rail helps restore smooth folding and proper sealing. Unplug the refrigerator before disconnecting the heater wiring or removing the assembly. This is an OEM part sourced directly from the manufacturer.
This black refrigerator door mullion rail seals the center gap between French doors. The hinged strip folds into place as the door closes, providing a surface for the door gaskets to seal against. Its internal heater helps reduce condensation along the center seam. Cracked housing, worn hinges, or a failed heater may cause poor closure, air leaks, or moisture buildup. Replacing a damaged rail helps restore smooth folding and proper sealing. Unplug the refrigerator before disconnecting the heater wiring or removing the assembly. This is an OEM part sourced directly from the manufacturer.
What this part fixes:
  • Door Sweating
  • Door won’t open or close
Installation Instructions
Don from Alpine, TX
Broken Rail-Mullin
The mullin requires only one screw removal, then LIFT the entire mullin upwards. Pop the wire harness loose, and replace with new mullin. Simple job,
This refrigerator dairy compartment door keeps butter, spreads, and cheeses enclosed inside the door bin. The clear plastic cover lets you see stored items while giving the compartment a tidy, finished appearance. Built-in hinge pins allow it to pivot for access and close over the opening. Cracks, broken pins, or warped edges may leave the cover loose or unable to close properly. Replacing a damaged flap restores convenient coverage. Empty the compartment before installation and gently fit the side pins into their holders without forcing them. This is an OEM part sourced directly from the manufacturer.
This refrigerator dairy compartment door keeps butter, spreads, and cheeses enclosed inside the door bin. The clear plastic cover lets you see stored items while giving the compartment a tidy, finished appearance. Built-in hinge pins allow it to pivot for access and close over the opening. Cracks, broken pins, or warped edges may leave the cover loose or unable to close properly. Replacing a damaged flap restores convenient coverage. Empty the compartment before installation and gently fit the side pins into their holders without forcing them. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
Patricia from Inglewood, CA
Both parts were broken and required replacement.
The broken part was removed and new part installed without any trouble.
A poor seal between French-door refrigerator doors can point to a problem with the gray vertical mullion rail. This OEM rail helps create the seal and includes a mullion heater. Installation uses basic hand tools, including a multi-screwdriver, and requires some refrigerator disassembly. Confirm fit with your refrigerators model number.
A poor seal between French-door refrigerator doors can point to a problem with the gray vertical mullion rail. This OEM rail helps create the seal and includes a mullion heater. Installation uses basic hand tools, including a multi-screwdriver, and requires some refrigerator disassembly. Confirm fit with your refrigerators model number.
What this part fixes:
  • Door won’t open or close
Installation Instructions
Michael from FALLBROOK, CA
When right hand door was opened first, and then left hand door, the mullion rail did not move all the way to the "open" position so that if the left hand door was closed after the right hand door the rail would bang against the right hand door and not close all the way until manually pushed into pos
Remove the existing mullion rail:

- Remove the screw from the center hinged cover.
- Remove the mullion rail by pushing upward. The top and bottom hinges slide over tabs attached to the door. I had to bump it gently from underneath.
- Disconnect the three wire connector that's underneath the center hinged cover.

Install the new mullion rail by reversing the above steps:
- Connect the three wire connector and snap it into its holder.
- Slide the new part over the top and bottom hinges. Be sure that all three hinges are correctly lined up before sliding the rail over the tabs.
- Push it down far enough that the hole for the screw in the center cover is lined up with its corresponding receptacle in the door.
- Replace the screw.
This refrigerator dairy compartment door keeps butter, cheese, and spreads enclosed while making them easy to see. The clear plastic panel lifts for access and lowers to cover the storage opening. Built-in hinge tabs let it pivot smoothly on the compartment supports. Cracks, broken tabs, or warped edges may leave the cover loose or unable to close properly. Replacing a damaged door restores convenient coverage and a tidy appearance. Gently fit the hinge points during installation, and clean the surface with mild soapy water and a soft cloth. This is an OEM part sourced directly from the manufacturer.
This refrigerator dairy compartment door keeps butter, cheese, and spreads enclosed while making them easy to see. The clear plastic panel lifts for access and lowers to cover the storage opening. Built-in hinge tabs let it pivot smoothly on the compartment supports. Cracks, broken tabs, or warped edges may leave the cover loose or unable to close properly. Replacing a damaged door restores convenient coverage and a tidy appearance. Gently fit the hinge points during installation, and clean the surface with mild soapy water and a soft cloth. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
john from NORWOOD, MA
replaced cracked compartment door
removed old and installed new compartment door by hand.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

Installation Instructions
Cynthia from Atlanta, GA
Used frig was missing these items
Just installed them with my hands - very easy. I also found the website easy to navigate and find the parts I needed. Delivery was great also - good job!
This flipper assembly is for refrigerators. The flipper assembly creates an airtight seal between the doors on a French-door refrigerator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
This flipper assembly is for refrigerators. The flipper assembly creates an airtight seal between the doors on a French-door refrigerator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
What this part fixes:
  • Door won’t open or close
Installation Instructions
George from Washingtonville, NY
Broken top mount mullion, broken pin and deli tray lid
Parts arrived quick and installed easy. One reveiwer said his wife did theinstall and that was my inspiration. Thank you.
Open and close the dispenser chute flap with this refrigerator ice door motor and bracket assembly. The motor moves the flap during ice delivery, then returns it to the closed position to help keep warm, humid air out. A failed motor or damaged bracket may prevent dispensing or leave the flap open, allowing frost and condensation to form. Replacing a faulty assembly helps restore controlled flap movement. Unplug the refrigerator before installation, secure the wiring and mounting hardware, and check that the flap moves freely. This is an OEM part sourced directly from the manufacturer.
Open and close the dispenser chute flap with this refrigerator ice door motor and bracket assembly. The motor moves the flap during ice delivery, then returns it to the closed position to help keep warm, humid air out. A failed motor or damaged bracket may prevent dispensing or leave the flap open, allowing frost and condensation to form. Replacing a faulty assembly helps restore controlled flap movement. Unplug the refrigerator before installation, secure the wiring and mounting hardware, and check that the flap moves freely. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
Robert from SAN DIEGO, CA
Ice Dispenser worked poorly causing frequent frost buildups and poor dispenser operation
This built-in model requires complete removal of stainless steel door "Cover". A trim piece that covers the screws on the left side of the door requires lowering the refrigerator on to the rolling legs and moving it forward for access. The tipover strap on top of the refrigerator must be removed first. One the door is slowly lowered and then pulled out you need to remove the trim piece then remove the screws on the bottom, top, and lft side. Then remove the four screws from the internal side of the dispenser. With assistance slowly pull the entire front cover from the door which gives access to the internal electronic pad. Be very careful with the door cover as the edges are razor sharp stainless steel. Remove the electronic pad (4 socket screws) and move it to provide access to the motor bracket assembly. Remove assembly (2 screws) and replace with new. This includes removing the connector plug which came off easily. The replacement assembly was a new design from the original which appeared to be much better design. This was very simple to replace. Now the hardest part is "popping" the front door cover back on the front which is a two person job. I taped the trim attachment strips to the inside of the cover (left and bottom sides had the strip) so the screw holes would line up when the cover is replaced. All four sides must slide on at the same time with a slight advantage to the side with the handle. Note: this can be dangerous because of the sharp edges and very precise fit...a blood donation was required because of an errant hand and the quick snap in popping the door in place. Once its back on, reverse the process of replacing the screws and carefully moving back in to position and raising back up to previous height. I had very little information on how to do this so I did it slowly and deliberately so it took me about two hours. The dispenser now works better then ever and I have had no frost build up....I wish I had done it 4 years ago.
This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with technical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.
This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with technical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.
Installation Instructions
Mark from DEARBORN, MI
Our old plastic dairy door had a broken part and it kept coming undone
The new door just popped into place. Took seconds to complete. Fast delivery too.

More Whirlpool Refrigerator Parts

People often need to fix these common parts