Frigidaire Dryer Springs and Shock Absorbers

Your Price

$53.20

Frigidaire Dryer Idler Arm Spring

★★★★★

1 Review

PartSelect Number PS418263

Manufacturer Part Number 131601000

Keep your cooking experience as smooth as always with our authentic OEM Whirlpool Cooktop. This replacement part is the perfect solution to getting your stove back in top shape, ensuring your meals are always cooked evenly and efficiently. It?s designed to perfectly fit various models across different brands including, Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. However, we also remind you that even though parts often look the same, they can have slight variations in size and shape. For the best fit and smooth operation, please double check that your model number matches before placing an order through our website. With the Whirlpool Cooktop, you?re not just replacing a part?you?re enhancing your entire cooking experience. This significant upgrade provides your appliance with the consistency and reliability that you need for stress-free cooking. So, go ahead and trust the Whirlpool name for all your appliance replacement part needs. You'll have peace of mind knowing you're using genuine parts engineered to work perfectly with your appliances. Let us help you keep your kitchen running smoothly and your meals tasting great.

Fixes these symptoms

Noisy
See more...

Installation Instructions

john from owego, NY

clothes got caught , burned and ripped on front of drum

I felt ,if I was going to replace the top drum glide and lower basket seal, I might as well replace the belt ,bearing assembly and the idle pulley assembly and avoid having to replace these sooner than later. All of the parts showed alot of wear and the belt like all drive belts, should be changed every 5-6 years.
DISCONNECT ELECTRICITY and GAS LINES
1.popped top by pushing and prying at front /top clips about 2-3in. in from side edges. lifted it off
2. removed the front panel by removing the 2 top front screws from the inside, then the two lower screws from the front after removing the small white plastic hole covers. disconnected the multiplug electric connector top right. set panel aside.
3.remove small back panel.and loosened belt.(observe belt path and idle pulley assy.
4. lifted drum and slid it out the front.
5. using socket, removed rear plastic bearing housing and replaced the same. be careful of observing the small ball bearing and the small piece on outside back panel. replace the same. you wil probably need a second set of hands to hold the piece on the outside when screwing in the screws from the inside.
6. unscew the "bearing" from the rear of the drum and replace with new one.(the screws are self-tapping and go in HARD!!)
7. apply lubricant liberally to plastic bearing holder
8. place new belt around drum(rubber side against drum cloth side out.
9. idle pulley assy. is removed by removing spring and just sliding assy out of holder. replace with new
10. replace drum and belt
11. take front panel and remove top drum glide and lower basket seal.( i marked where the two seal/glide come together with a marker )
12. scrape and remove as much felt and possible. I then used "goo gone" to remove all the glue. clean well and using the provided high temp adhesive reattached glide and seal.
13. reassemble and enjoy your NEW? dryer Read more...

Your Price

$46.34

Frigidaire Dryer Vertical Spring - Short

PartSelect Number PS1990844

Manufacturer Part Number 134886600

Sold individually.

Installation Instructions

Celeste from YAKIMA, WA

Washer tub enables after end of spin cycles

Replacing all springs. Able to replace 2 short springs and front spring. Can't get to ones in back of washer tub. Unable to use strenght in arms to remove old springs. Help videos were great. Saved money by doing repairs myself. Read more...

Your Price

$62.60

Frigidaire Dryer Spring

PartSelect Number PS446942

Manufacturer Part Number 3205241

Your Price

$31.58

Frigidaire Dryer Suspension Spring - Long

PartSelect Number PS1990843

Manufacturer Part Number 134885900

Sold individually.

Installation Instructions

Celeste from YAKIMA, WA

Washer tub enables after end of spin cycles

Replacing all springs. Able to replace 2 short springs and front spring. Can't get to ones in back of washer tub. Unable to use strenght in arms to remove old springs. Help videos were great. Saved money by doing repairs myself. Read more...