My Orders
Frigidaire Dryer Switches
GET YOUR OFFICIAL Frigidaire PARTS TO ENSURE VICTORY
Popular Frigidaire Dryer Switches
This part is used to start the dryer once you have selected a setting on the timer.
This part is used to start the dryer once you have selected a setting on the timer.
Installation Instructions
ERNEST from SPRINGFIELD, MA
dryer start switch shaft was broken by using pliers after knob was lost
I first disconnected the power by unplugging power cord.
I then removed back cover from control panel using philips screwdriver.
I removed the start switch by twisting it counter clockwise.
I removed the two push on connectors from the start switch.
I installed the two connectors on the new swi ... Read more tch.
I twisted the new switch into place, and installed the new knob.
I reinstalled the back cover plate.
I inserted the power cord back into the receptacle.
I twisted the start knob clockwise.
VOILA!!!!!
I then removed back cover from control panel using philips screwdriver.
I removed the start switch by twisting it counter clockwise.
I removed the two push on connectors from the start switch.
I installed the two connectors on the new swi ... Read more tch.
I twisted the new switch into place, and installed the new knob.
I reinstalled the back cover plate.
I inserted the power cord back into the receptacle.
I twisted the start knob clockwise.
VOILA!!!!!
Read less
This genuine OEM Frigidaire Dryer Door Switch, specifically designed for specific models of washers and dryers from Frigidaire, Electrolux, White Westinghouse, and Tappan. Acting as an essential safety feature, the switch prevents the dryer from running while the door is open. The sleek white design offers an aesthetic and functional purpose to harmoniously blend into the appliance. Please remember to confirm the compatibility of this part with your specific model before purchasing. While it's a straightforward installation, remember to unplug your appliance beforehand and consider wearing work gloves for added protection. This part ensures your dryer runs efficiently and safely, making it a vital component for your appliance's optimal performance.
This genuine OEM Frigidaire Dryer Door Switch, specifically designed for specific models of washers and dryers from Frigidaire, Electrolux, White Westinghouse, and Tappan. Acting as an essential safety feature, the switch prevents the dryer from running while the door is open. The sleek white design offers an aesthetic and functional purpose to harmoniously blend into the appliance. Please remember to confirm the compatibility of this part with your specific model before purchasing. While it's a straightforward installation, remember to unplug your appliance beforehand and consider wearing work gloves for added protection. This part ensures your dryer runs efficiently and safely, making it a vital component for your appliance's optimal performance.
This switch is for a dryer door with a drum light.
This switch is for a dryer door with a drum light.
Installation Instructions
THOMAS from CROSS LANES, WV
drum light stayed on and the dryer would not run, "dr" was was displayed in read out
spoke with repair person he indicated problem was not door switch but control board, prior to repair person arriving I receive the switch in the mail, I unplugged drier used a small edged screw driver to remove door light switch, removed three wire clips from the old switch, re connected the wires to new switch pushed the new switch into
... Read more
its location, closed the door light went out and the drier started and has ran just fine ever since, saved myself several hundred dollars or a new drier
Read less
This start switch is a manufacturer-approved replacement part for your dryer. A faulty start switch means your dryer will not begin its drying cycle. In order to complete this repair, you will need a Phillips screwdriver. Once you access the switch, disconnect the two wire leads and attach them to the new switch. Make sure to disconnect power to the unit before beginning this repair, and wear work gloves.
This start switch is a manufacturer-approved replacement part for your dryer. A faulty start switch means your dryer will not begin its drying cycle. In order to complete this repair, you will need a Phillips screwdriver. Once you access the switch, disconnect the two wire leads and attach them to the new switch. Make sure to disconnect power to the unit before beginning this repair, and wear work gloves.
Installation Instructions
Greg from Lampasas, TX
Knob craked and broke off the start switch
Removed all the knobs but the master washing machine control knob, then the control and cover panels by removing the two screws that held each one. Then removed the end plastic pieces to allow access to screws holding the switch onto control panel. Used pliers to pull wires off the old switch and put them back on new switch. Screwed it
... Read more
back in place and re-attached plastic end pieces. Re-attached the control panel, then the cover panel under the control panel.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
