Frigidaire Dryer Circuit Boards and Touch Pads

Videos!

Your Price

$191.22

Frigidaire Dryer Control Board

★★★★★

3 Reviews

PartSelect Number PS12728777

Manufacturer Part Number 134557201NH

This board no longer comes with housing. Customers must reuse the existing housing.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Brent from Bend, OR

Dryer would not stay on one setting and lights would go nutty

Figured the board was bad since the settings would change if you touched the plastic face lightly.

Disconnected the power!

Removed the 2 screws off the back of the dryer top panel.

removed the 4 screws off the control face plate to access the Circuit board.

Disconnected the pc connectors and spade plugs (making sure to put them on the same spot on the old one).

Took the clock out of the original, LED light bars, front knob etc and put them into the replacement assembly.

Reinstalled and plugged in power. Read more...

Your Price

$185.16

Frigidaire Dryer Control Board - No Housing

★★★★★

3 Reviews

PartSelect Number PS12724036

Manufacturer Part Number 134523200NH

This part has been updated by the manufacturer and no long comes with the white plastic housing.

Installation Instructions

Thomas from Mauldin, SC

White magic smoke came out of front.

I removed two screws at the rear top, slid the top back. Then removed the screws holding the front face on. The circut board had a few screws holding it on. I removed them and detachted the wires, then installed the new board. I then reassembled the front and the wires. I put it back together and plugged it in. Everything lit up and the dryer was fixed. HORRAY! My wife was happy again. Daddy saves the day, not to mention the repair cost.! Read more...

Your Price

$188.86

Frigidaire Dryer Control

★★★★★

3 Reviews

PartSelect Number PS12728776

Manufacturer Part Number 134557200NH

This dryer control assembly provides the interface for selecting cycles and managing drying functions. Designed for durability and precision, it restores usability when buttons or display become unresponsive.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Scott from FLORENCE, OR

Dryer display was showing E68 error code, and responding erratically to attempts to reset.

First, I had to decide if it was reasonable to attempt the repair. Was it worth spending $160 to see if that would fix it, or would I just find out I'd have to start fresh and buy a new dryer, in which case the cost of the (failed) repair would add to the total cost. I was sure enough a new Control was the answer, the decision was to go ahead.

I was concerned about getting the right part, but between your search feature that assured me my selection "will fit your unit", and the option to return the part if it wasn't right, I felt confident enough to order it. Also I was concerned about having good instructions to follow, but there was a YouTube video that showed all the details clearly. The included written instructions gave the general sequence to follow, but weren't for my specific model.

The actual repair was easy. Because the washer and dryer were stacked, it was harder to get to the back screws than in the YouTube video. I stood on a stepladder, and used an awl (with a mirror) to line up the holes when re-securing the top lid because I couldn't see them directly. I compared the new Control with the old by looking through the anti-static bag. If it looked wrong I wanted to be able to return it, and it had to be unopened to do so. Undoing the connectors, unscrewing the frame pieces holding the board, swapping out the boards, and putting it all back together went fine with the help of the video. I would recommend marking the old board to avoid installing it again by mistake. No, I didn't do that, but the old board was hardly dirty or worn and didn't look much different than the new one. Also, I didn't drop any of the screws, but if you do and they go down behind the unit or into it, one of those magnetic telescoping hardware retrievers might be useful.

That fixed it! 160 bucks instead of whatever a new dryer costs these days is a good tradeoff, and a whole lot less aggravation. It's been working fine ever since. Read more...

Your Price

$236.44

Frigidaire Dryer Main Board

PartSelect Number PS16745833

Manufacturer Part Number 5304533199

Introducing the Frigidaire Main Board: a genuine Original Equipment Manufacturer (OEM) component, recommended for select models of Electrolux, White Westinghouse, and Tappan dryers. This product effortlessly governs various functions of your dryer, seamlessly managing elements like drying time and temperature to ensure optimal performance. Prior to installing, disconnect the dryer from the power source and take precautions such as wearing work gloves to safeguard your hands. Thanks to our online selection, securing this important part is only a few clicks away - always ensure your part number matches your model for precise compatibility. Streamline your dryer's processes with the aid of this Frigidaire Main Board.

Fixes these symptoms

Won’t Start
See more...

Installation Instructions

Joseph from PENSACOLA, FL

Dryer would not start, no interior light, no indicator lights

Watched several videos on unit disassembly/reassembly and fault repair (YouTube is great). Moved the dryer into the garage. Removed the top cover, front loading door assembly and back panel. I used a large piece of cardboard as my screw holder. As I removed a screw, I drilled it into the cardboard and then wrote what they were for and how many there were (some of the notes were very specific). Visual inspection revealed the relay on the main control board (MCB) had failed (burnt up and spewed molten plastic on several of the MCB's wiring harnesses and wiring connectors). The failed relay had melted and pitted the wires and connectors for the heater (they needed to be replaced). Purchased a new MCB (it came with a complete wiring harness). Vacuumed all of the dryer components. Took photos of everything I replaced/touched (the MCB, wiring harness routing, location of the wiring harness clips, assembly screws, wires to each component). Unmounted the old MCB and disconnected the wiring harness clips for the harness going to the front door assembly. Mounted the new MCB and inserted the new wiring harness clips (for the front section). One wire at a time, removed the old wiring harness connector and installed the new wiring harness connector, in its place. Once the front was completed, moved to the wiring harness going to the back and underneath of the dryer. Followed the same steps and methodically replaced the wiring harness. Reattached the back panel, front loading door assembly and the top cover. Re-installed the dryer in the laundry room made the wall connections and tested it. It works!!! Read more...

Your Price

$236.95

Frigidaire Dryer Main Board

PartSelect Number PS12365503

Manufacturer Part Number 5304513547

Discover a genuine and effective solution for your appliance repair needs with the Frigidaire Main Assembly Board. This original equipment manufacturer (OEM) part is compatible with a range of Frigidaire, Electrolux, White Westinghouse, and Tappan models. This main board controls vital functions of your dryer, including the drying time and temperature. While installing, ensure the dryer is unplugged and use work gloves to protect your hands. For an optimal performance, confirm this part is the correct one for your specific model as similar parts can have slight size and shape variations. Enhance your appliance's functionality with this essential Frigidaire Main Assembly Board.

Your Price

$157.66

Frigidaire Dryer Board Assy

PartSelect Number PS12728916

Manufacturer Part Number 5304521513

This user interface board assembly is a vital electronic component for select dryers, responsible for managing display functions and processing cycle selections. Weighing approximately 0.68 lbs, it serves as the communication bridge between the user and the appliance, receiving signals from the main control board to illuminate the display and interpret button or touch inputs. A malfunctioning board may result in a blank, flickering, or unreadable display, as well as unresponsive controls. Replacing this part restores full functionality to the control panel and ensures accurate cycle selection. Installation requires disconnecting the appliance from its power source and handling the component with care, ideally using work gloves. Always verify model compatibility before installation.

Your Price

$167.33

Frigidaire Dryer Board Assembly

★★★★★

1 Review

PartSelect Number PS16620791

Manufacturer Part Number 5304529940

This dryer main control board assembly manages key appliance functions such as cycle timing, temperature control, and motor operation to ensure reliable drying performance. It is often replaced when the dryer will not start, stops mid-cycle, behaves erratically, or is completely unresponsive despite having power. The board is typically housed in a protective casing for durability and proper fit. Installation requires disconnecting power to the dryer and carefully transferring wire connections to the new control board. Size, dimensions, and color may vary by dryer model.

Your Price

$220.00

Frigidaire Dryer Main Board

PartSelect Number PS16227237

Manufacturer Part Number 5304525687

This main control board is a genuine replacement part designed to manage the core functions of select dryers. Housed in a protective casing, it regulates essential operations such as drying time, temperature, and cycle progression. It processes input from sensors and user controls to ensure accurate performance and energy efficiency. If your dryer is not heating properly, the timer is malfunctioning, or cycles are not completing as expected, replacing the control board may resolve the issue. As an OEM component, it is manufactured to meet high standards of quality and is compatible with a range of models. Always disconnect the appliance from power before installation and verify compatibility with your specific model.

Your Price

$207.85

Frigidaire Dryer Pc Board

PartSelect Number PS12718301

Manufacturer Part Number 5304521161

This printed circuit board controls and monitors appliance functions by managing communication between electrical components. It plays a key role in overall system reliability and performance. Replacing a failing board can resolve operational errors or loss of functionality.