My Orders
Frigidaire Dryer Filters
GET YOUR OFFICIAL Frigidaire PARTS TO ENSURE VICTORY
Popular Frigidaire Dryer Filters
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 inches long x 11 inches high. It has a plastic frame and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup or lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. But if the filter is damaged, worn, or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 inches long x 11 inches high. It has a plastic frame and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup or lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. But if the filter is damaged, worn, or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Installation Instructions
Yvette from RUTHER GLEN, VA
Lint filter unusable due to age
Inserted lint filter into slot.
Replacement is exact match to original filter.
Replacement is exact match to original filter.
This dryer lint screen is for laundry centers.
Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer.
Follow the instructions in the owner's manual when installing this part.
This dryer lint screen is for laundry centers.
Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer.
Follow the instructions in the owner's manual when installing this part.
Installation Instructions
Marc from Malden, MA
My old lint filter had a few holes in it.
I got online and found that everyone was charging a king's ransom for a piece of plastic. Your ransom was slightly less. Then I paid $7 shipping and handling for the part which came packed in a box six times its size...I guess all that cardboard costs a mint. I opened the box, removed the lint filter, and put it into my dryer....voila!
... Read more
No more holes!
Read less
Located at the front of the dryer, this lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 12 inches long x 7 inches high, has a plastic frame, and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup of lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. If the filter is damaged or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Located at the front of the dryer, this lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 12 inches long x 7 inches high, has a plastic frame, and a mesh body to catch debris. If your filter needs cleaning, the dryer cycle will take longer due to a buildup of lint or fabric softener affecting the air flow through the filter. If there is a buildup, try scrubbing the filter with hot water and soap. If the filter is damaged or torn, it should be replaced. Cleaning the lint filter before starting the drying cycle is a great way to ensure your dryer performs properly.
Installation Instructions
Jeff from Bethalto, IL
lint filter did not fit "squarely" into its place
replaced old filter, only to find that the new one had the same issue. After closer examination, I determined the filter guide that screws into place, which I had removed earlier to clean lint out, did not hold the lint casing correctly. I removed and reinstalled the piece that has the metal moisture sensors, and replaced it, ensure bot
... Read more
h screws held the lint casing as it should. Now I have two lint filters that fit perfectly! So, if you ever remove the piece wtih the metal sensors, make sure that the lint casing is screwed in correctly when replacing.
Read less
This is a genuine OEM lint filter, which works with dryers.
This is a genuine OEM lint filter, which works with dryers.
This lint filter and screen assembly is a genuine replacement component designed for use in select clothes dryers. It captures lint, fibers, and small debris from the exhaust air to prevent buildup in the vent and blower housing. By maintaining clear airflow, it helps improve drying efficiency, reduce energy consumption, and lower the risk of overheating or fire hazards. The filter is made from durable materials and is designed for easy removal and cleaning as part of regular maintenance. If the original filter is damaged or missing, replacing it can restore safe and effective dryer performance. Compatibility should be verified with your specific model before installation.
This lint filter and screen assembly is a genuine replacement component designed for use in select clothes dryers. It captures lint, fibers, and small debris from the exhaust air to prevent buildup in the vent and blower housing. By maintaining clear airflow, it helps improve drying efficiency, reduce energy consumption, and lower the risk of overheating or fire hazards. The filter is made from durable materials and is designed for easy removal and cleaning as part of regular maintenance. If the original filter is damaged or missing, replacing it can restore safe and effective dryer performance. Compatibility should be verified with your specific model before installation.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This dryer lint filter traps lint and debris from exhaust airflow to help prevent vent clogs and maintain efficient drying performance. It is typically located at the door opening or in a front-mounted slot inside the dryer drum for easy access. The filter measures approximately 13 inches wide by 11.5 inches high and is made from durable plastic with a fine mesh screen, commonly finished in white or light gray. A torn or damaged screen can lead to longer drying times or lint left on clothing, indicating replacement is needed. Installation is tool-free and involves sliding the filter into place in the correct orientation, and regular cleaning before each load is recommended to maintain airflow and reduce fire risk.
This dryer lint filter traps lint and debris from exhaust airflow to help prevent vent clogs and maintain efficient drying performance. It is typically located at the door opening or in a front-mounted slot inside the dryer drum for easy access. The filter measures approximately 13 inches wide by 11.5 inches high and is made from durable plastic with a fine mesh screen, commonly finished in white or light gray. A torn or damaged screen can lead to longer drying times or lint left on clothing, indicating replacement is needed. Installation is tool-free and involves sliding the filter into place in the correct orientation, and regular cleaning before each load is recommended to maintain airflow and reduce fire risk.
This dryer lint filter kit helps capture lint and debris from the air flowing through the dryer, supporting proper airflow and efficient drying performance. A damaged, clogged, or worn lint filter system can restrict airflow, leading to longer drying times, reduced performance, and increased lint buildup inside the appliance. Replacing the filter system can help restore proper airflow, improve drying results, and keep the dryer operating efficiently. This kit includes both the lint screen and the filter housing assembly, which are designed to be installed together. Once the kit has been installed, future maintenance typically requires replacing only the lint screen as needed.
This dryer lint filter kit helps capture lint and debris from the air flowing through the dryer, supporting proper airflow and efficient drying performance. A damaged, clogged, or worn lint filter system can restrict airflow, leading to longer drying times, reduced performance, and increased lint buildup inside the appliance. Replacing the filter system can help restore proper airflow, improve drying results, and keep the dryer operating efficiently. This kit includes both the lint screen and the filter housing assembly, which are designed to be installed together. Once the kit has been installed, future maintenance typically requires replacing only the lint screen as needed.
Installation Instructions
Suzanne from PALM SPRINGS, CA
Excessive lint build up in fan blades of Electrolux 617 series dryer
I watched and re-watched a YouTube video where these parts were recommended for a retro fit of the Electrolux 617 dryer. The original parts for this dryer allow too much lint to get past the lint screen and into the fan blades. To install these new parts you just need to be careful to pull the moisture sensor leads off of the old grill as
... Read more
sembly and put them on to the correct prongs on the new grill assembly. (You will not use the leads that the new parts come with.) You may want to take a picture of how the leads were on the old assembly before you pull them off. You also need two, two-inch #10 screws that are readily available at hardware stores. I bought the "sheet metal" type screws. The YouTube video can be found by entering the words "Electrolux Dryer Lint Fix & Retrofit" into Google or YouTube search bar. If you follow it to the letter all will be well, but be careful to line up the holes for the screws. Having someone else holding a flashlight would be ideal, but it's not absolutely necessary.
So does this work? Yes, the parts fit just fine and they improve the situation a great deal but they don't completely solve it if you have a dog that has those little short sharp hairs and the dog sleeps in your bed, sits on your lap and leaves dog hair all over stuff that will be washed and put into the dryer. Those hairs will still get past the new clam shell filter but the good news is, you don't have to pull the dryer apart to clean the fan blades after you have installed these new parts. You can take the hose from your vacuum cleaner and just stick it in the fan blade compartment (after removing clamshell lint screen) and you will be able to capture most of what got past the screen. How is this different than before? The kind of lint that makes it past the new parts is much lighter and finer than what got past the old screen so the vacuum can easily pull it out.
PS I love Parts Select. This is the second thing I've ordered from them and I've been so impressed with how fast the parts arrived and how nicely they were packed. It's a first class organization in my opinion.
So does this work? Yes, the parts fit just fine and they improve the situation a great deal but they don't completely solve it if you have a dog that has those little short sharp hairs and the dog sleeps in your bed, sits on your lap and leaves dog hair all over stuff that will be washed and put into the dryer. Those hairs will still get past the new clam shell filter but the good news is, you don't have to pull the dryer apart to clean the fan blades after you have installed these new parts. You can take the hose from your vacuum cleaner and just stick it in the fan blade compartment (after removing clamshell lint screen) and you will be able to capture most of what got past the screen. How is this different than before? The kind of lint that makes it past the new parts is much lighter and finer than what got past the old screen so the vacuum can easily pull it out.
PS I love Parts Select. This is the second thing I've ordered from them and I've been so impressed with how fast the parts arrived and how nicely they were packed. It's a first class organization in my opinion.
Read less
The lint screen traps lint and debris from the exhaust air flowing from the dryer.
The lint screen traps lint and debris from the exhaust air flowing from the dryer.
This genuine OEM dryer lint filter kit is designed to capture lint, debris, and airborne particles, helping maintain proper airflow and efficient drying performance. The complete assembly includes a durable filter housing, a finely woven mesh screen, and the main lint filter, working together to prevent lint buildup within the ventilation system. Ideal for replacing worn or damaged components, it helps resolve issues such as extended drying times, increased noise, and restricted airflow. By restoring effective filtration and airflow, this kit supports safe operation and helps improve the overall efficiency and reliability of your dryer.
This genuine OEM dryer lint filter kit is designed to capture lint, debris, and airborne particles, helping maintain proper airflow and efficient drying performance. The complete assembly includes a durable filter housing, a finely woven mesh screen, and the main lint filter, working together to prevent lint buildup within the ventilation system. Ideal for replacing worn or damaged components, it helps resolve issues such as extended drying times, increased noise, and restricted airflow. By restoring effective filtration and airflow, this kit supports safe operation and helps improve the overall efficiency and reliability of your dryer.
Installation Instructions
Suzanne from PALM SPRINGS, CA
Excessive lint build up in fan blades of Electrolux 617 series dryer
I watched and re-watched a YouTube video where these parts were recommended for a retro fit of the Electrolux 617 dryer. The original parts for this dryer allow too much lint to get past the lint screen and into the fan blades. To install these new parts you just need to be careful to pull the moisture sensor leads off of the old grill as
... Read more
sembly and put them on to the correct prongs on the new grill assembly. (You will not use the leads that the new parts come with.) You may want to take a picture of how the leads were on the old assembly before you pull them off. You also need two, two-inch #10 screws that are readily available at hardware stores. I bought the "sheet metal" type screws. The YouTube video can be found by entering the words "Electrolux Dryer Lint Fix & Retrofit" into Google or YouTube search bar. If you follow it to the letter all will be well, but be careful to line up the holes for the screws. Having someone else holding a flashlight would be ideal, but it's not absolutely necessary.
So does this work? Yes, the parts fit just fine and they improve the situation a great deal but they don't completely solve it if you have a dog that has those little short sharp hairs and the dog sleeps in your bed, sits on your lap and leaves dog hair all over stuff that will be washed and put into the dryer. Those hairs will still get past the new clam shell filter but the good news is, you don't have to pull the dryer apart to clean the fan blades after you have installed these new parts. You can take the hose from your vacuum cleaner and just stick it in the fan blade compartment (after removing clamshell lint screen) and you will be able to capture most of what got past the screen. How is this different than before? The kind of lint that makes it past the new parts is much lighter and finer than what got past the old screen so the vacuum can easily pull it out.
PS I love Parts Select. This is the second thing I've ordered from them and I've been so impressed with how fast the parts arrived and how nicely they were packed. It's a first class organization in my opinion.
So does this work? Yes, the parts fit just fine and they improve the situation a great deal but they don't completely solve it if you have a dog that has those little short sharp hairs and the dog sleeps in your bed, sits on your lap and leaves dog hair all over stuff that will be washed and put into the dryer. Those hairs will still get past the new clam shell filter but the good news is, you don't have to pull the dryer apart to clean the fan blades after you have installed these new parts. You can take the hose from your vacuum cleaner and just stick it in the fan blade compartment (after removing clamshell lint screen) and you will be able to capture most of what got past the screen. How is this different than before? The kind of lint that makes it past the new parts is much lighter and finer than what got past the old screen so the vacuum can easily pull it out.
PS I love Parts Select. This is the second thing I've ordered from them and I've been so impressed with how fast the parts arrived and how nicely they were packed. It's a first class organization in my opinion.
Read less