All Installation Instructions for General Electric Dishwasher PDW7300J03CC

Plastic hinge arm link broke

Squeeze the new link to the cable hook with pliers while locking the vise grip to the cable for easier handling. Then, using the vise grip on the cable, hook the other end of the link to the dishwasher door hook

Parts Used:

Hinge Arm Link

Eric from EAST MEADOW, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One axle cracked and broke off; another wheel was had fallen off and was distorted when it hit the heating element.

Removed all 8 wheels and inserted the new one after inserting the axles into each wheel. Replacement wheels had a much better connection to the bottom rack and do not anticipate any problems in the future.

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Sheila from DEERFIELD, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

pieces that attach the wheels to the lower rack kept falling off

Ordered the new parts and attached to wheels on lower rack. The old pieces clamped on and the plastic stretched out and would not hold any longer. The 8 new pieces have a slightly different design, were easy to intall and I believe will never loosen up.

Parts Used:

Single Lower Wheel Stud/Axle

Laverne from Roselle, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Lower wheels kept falling off

Installed new lower rack wheel kit

Parts Used:

Lower Rack Wheel Kit - 8 Pack

helmut from EAST KINGSTON, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

some wheels had broken, was really hard to move rack in and out.

I am NOT handy, but my husband was gone when the wheels and stud/axles came. I was able to replace all of them in about ten minutes with no tools. Easy and no more frustrations!!!!!

Parts Used:

Single Lower Wheel Stud/Axle

Lower Rack Wheel Kit - 8 Pack

Kimberly from Durango, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old rack was rusted out and missing most of the wheels.

Easiest repair ever. My new rack arrived in three days, opened the box and slid it in. Better quality than the original. Excellent service!

Parts Used:

Complete Lower Service Rack Assembly

Jim from Palatka, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the lower rack wheels had fallen off and melted

The best money I've spent on a repair. Easy. The lower rack now rolls in and out smoothly.

Parts Used:

Single Lower Wheel Stud/Axle

Lower Rack Wheel Kit - 8 Pack

Alfred from Mashpee, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Wheels kept falling off

Removed the old wheels and studs. Pressed on the new studs and wheels. Viola.

Parts Used:

Single Lower Wheel Stud/Axle

Lower Rack Wheel Kit - 8 Pack

Edwin from Waldwick, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The detergent dispenser latch was broken

The repair was easy. Removed all the screws from the inside door panel, approx. 11. Watch out for that last screw as there isn't anything else holding the outside panel, inside panel and control panel together other than those screws. I then unplugged the old dispenser backed out another 6 screws and replaced the old dispenser with the new one. Put it all back together within about a half hour.

Parts Used:

Detergent Dispenser with Rinse Cap

KEVIN from MACKINAW, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Detergent cap would not stay closed

After removing the screws, the front of the dishwasher easily came off. I put 2 screws back in to hold the control panel in place. I did not want that to dangle while replacing the part. The part came off easily after removing the screws. Everything went together easy.

Parts Used:

Detergent Dispenser with Rinse Cap

Michelle from Carlisle, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Couldn't drain water

I connected one end of hose to the drain using a hose clamp and screwdriver then connected the other end to the dishwasher using anouther hose clamp and a screwdriver..

Parts Used:

Drain Hose

Janice from Rockville, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

one wheel was missing, others kept on falling off

Just snapped studs and wheels together and put them into place.

Parts Used:

Single Lower Wheel Stud/Axle

Lower Rack Wheel Kit - 8 Pack

ILONA from AUSTIN, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

We had a rip in our tub gasket.

I removed the old seal, cleaned behind it, and then put the new seal in. We saw a video on You Tube on how to do it. Partselect also sent instructions on a e mail with the order receipt. We enjoyed working with you guys. Your customer service representative was very nice and accurate in sending out the part. All went as she said it would. Thanks!!

Parts Used: