Magic Chef Dishwasher Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Magic Chef Dishwasher Switches
Your Price
$72.00
In Stock
Magic Chef Dishwasher Door Switches And Holder Assembly
remove the four wire conections and replace with new new switch Read more...
PartSelect Number PS2099645
Manufacturer Part Number 99002254
This part senses when the dishwasher door is closed so the cycle can start, and prevents it from starting if the door is not closed. If the dishwasher will not start or will not close, you may need to replace the door switches and holder assembly, also known as the door latch assembly. The dishwasher will not start if this part is defective. It includes two switches and the holder, this part does not include the handle or screws. Tools needed are T20 torx driver, needle nose pliers, and 1/4 inch nut driver. This is a genuine OEM part that is sourced directly from the manufacturer.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
Robert from Johnson, VT
no power
remove the eight screws that hold the inside door cover to gain access to the door switch. remove the four wire conections and replace with new new switch Read more...
Your Price
$50.56
In Stock
Magic Chef Dishwasher Door Switch
PartSelect Number PS11751645
Manufacturer Part Number WPW10274880
This Whirlpool Dishwasher Door Switch is a crucial element of your appliance's functioning, perfectly suited for select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. Once your door aligns and shuts, this switch detects this and ensures a smooth start to your dishwasher's cycle. Mindfully crafted, this is an authentic, OEM part ensuring optimal fit and finishing. For safety reasons, make sure to power off your appliance before attempting to install this component; we also recommend protective gear for your hands. Remember, parts may bear identical appearances but possess subtle size and shape differences ? verify a match with your model before ordering this switch! For a flawlessly functioning dishwasher, secure your Whirlpool Dishwasher Door Switch today.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$28.42
In Stock
Magic Chef Dishwasher Door Switch
PartSelect Number PS11747659
Manufacturer Part Number WP99002207
This dishwasher door switch will shut your dishwasher off when the door is opened.
Fixes these symptoms
- Door latch failure
- Will Not Start
- See more...
Installation Instructions
James from Rochester, NY
Door switches were worn. Diswasher would not operate unless extreme pressure was applied to the door.
I pulled the interior of the door until I was able to get to the switches on the door latch. I determined at least one switch was completely worn while the other worked minimally. I then looked for the latch assembly and found out that it was no longer available. So I did some searching and found the exact switches I needed from PartSelect. The switches came in about 3 days which then I installed them. The dishwasher powered right up and stayed on. So in the end it was much cheaper to repair this unit than buy a new one right now. Plus, my wife is happy and so am I. Thanks PartSelect for carrying the parts I needed.
Read more...
Your Price
$49.50
Special Order
Your Price
$47.40
Special Order
Your Price
$28.42
Special Order
Your Price
$46.34
In Stock
No Longer Available
Magic Chef Dishwasher Float Switch
Installed new float assembly, but could not use the float palnut, it had too small of a hole, I substituted a larger one that fit the float better. Note I fitted the palnut to the float (the nut cuts it's own threads in the float) before installing the float. This made installation easier. Next I transferred the two wires from the old float switch to the new float switch in the same positions as the existing switch wires. Then I installed the float switch. Finally, I cleaned up the float switch actuator and screw so that the actuator moves freely on the screw. I then installed the float switch actuator and ran the dishwasher to check for proper operation. Note: this float and switch control the water level in the dishwasher. If the actuator sticks, the dishwasher will fill with too much water and leak. If the float has collected dirt inside, it will weigh more and the water level will be too high, causing the dishwasher will fill with too much water and leak. If the switch sticks or fails the water level will be too high, causing the dishwasher will fill with too much water and leak. That is why I relaced the parts: float and switch. I don't want to go back and work on this again.
Lastly, after a few days of proper operation, I installed the two plates located below the dishwasher door. Job done! Read more...
PartSelect Number PS11747680
Manufacturer Part Number WP99002560
Water that fills your dishwasher lifts this float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Fixes these symptoms
- Leaking
- Not draining
- Will not fill with water
- See more...
Installation Instructions
Andrew from Northfield, OH
Dishwasher leaks water
I removed the two plates located below the dishwasher door to expose the float switch. I removed the two screws holding float switch, I removed screw holding switch actuator, then I removed float assembly.Installed new float assembly, but could not use the float palnut, it had too small of a hole, I substituted a larger one that fit the float better. Note I fitted the palnut to the float (the nut cuts it's own threads in the float) before installing the float. This made installation easier. Next I transferred the two wires from the old float switch to the new float switch in the same positions as the existing switch wires. Then I installed the float switch. Finally, I cleaned up the float switch actuator and screw so that the actuator moves freely on the screw. I then installed the float switch actuator and ran the dishwasher to check for proper operation. Note: this float and switch control the water level in the dishwasher. If the actuator sticks, the dishwasher will fill with too much water and leak. If the float has collected dirt inside, it will weigh more and the water level will be too high, causing the dishwasher will fill with too much water and leak. If the switch sticks or fails the water level will be too high, causing the dishwasher will fill with too much water and leak. That is why I relaced the parts: float and switch. I don't want to go back and work on this again.
Lastly, after a few days of proper operation, I installed the two plates located below the dishwasher door. Job done! Read more...
Related Magic Chef Dishwasher Parts
- All Magic Chef Dishwasher parts
- Magic Chef Dishwasher Brackets and Flanges
- Magic Chef Dishwasher Caps and Lids
- Magic Chef Dishwasher Dishracks
- Magic Chef Dishwasher Dispensers
- Magic Chef Dishwasher Fuses
- Magic Chef Dishwasher Hardware
- Magic Chef Dishwasher Hoses and Tubes
- Magic Chef Dishwasher Pumps
- Magic Chef Dishwasher Seals and Gaskets
- Magic Chef Dishwasher Spray Arms
- Magic Chef Dishwasher Wheels and Rollers