My Orders
Magic Chef Dishwasher Caps and Lids
GET YOUR OFFICIAL Magic Chef PARTS TO ENSURE VICTORY
Popular Magic Chef Dishwasher Caps and Lids
This cap does not require the use of an O-ring seal. The wet agent assembly cap is clear in color and made of plastic. This is a part for your dishwasher. This part may need to be replaced if you notice that your dishwasher is not dispensing detergent, cleaning dishes properly, or has sprung a leak. The cap is found on the inside of your dishwasher door. This is an extremely simple repair that requires no tools. Simply open your dishwasher door, twist the old cap out of place, ensuring no pieces are left behind. Screw your new cap into place.
This cap does not require the use of an O-ring seal. The wet agent assembly cap is clear in color and made of plastic. This is a part for your dishwasher. This part may need to be replaced if you notice that your dishwasher is not dispensing detergent, cleaning dishes properly, or has sprung a leak. The cap is found on the inside of your dishwasher door. This is an extremely simple repair that requires no tools. Simply open your dishwasher door, twist the old cap out of place, ensuring no pieces are left behind. Screw your new cap into place.
Installation Instructions
Louis from Niceville, FL
Water dripped out from the bottom of door.
Diagnosing the problem, i.e. finding the source of the leak, was the hardest part. The best clue was the leak only occurred well into the cycle when the water was hot and steam was coming out the vent. I then assumed there was a bad seal and steam & condensed water was leaking down into the door. I replaced the vent duct & seal, a broken
... Read more
drip cover (an internal part in the door), and replaced a missing rinse aid cap. This stopped the leak.
Read less
Installation Instructions
mary from Fountain Green, UT
leaking water
The first thing I did was to investigate. I needed to find where the leak was coming from. It was leaking from just above tne door front panel, directly underneath the control panel buttons. I opened the dishwasher door, and decided to remove the door screen vent. I was covered with some offwhite fiberous, or filter like material. I thou
... Read more
ght perhaps the filter had broken down, and I ordered a new screen. When it arrived, and, although I had expected to receive a new filter with the plastic door screen, I didn't. There wasn't one to be ordered. I looked at the screen again. My problem was, that although I had considered that the substance I had thought was a filter, was instead build up of detergent, and other particals. That idea didn't seem to make sense. I didn't think it was possible for that stuff to get to the door screen. I thought, it was too far away from the dispenser and food particles. As it turned out, the buildup was, in fact, the problem. I properly cleaned the door vent, which was then fine, and I put it back into the door. There were no more leaks, that was it, and the problem was solved. As a last note however, unfortunatley, I have to return the new door vent screen that I ordered. I enjoyed solving the problem, and you all helped alot. Let's do it again sometime.
Read less
Looking to bring your treasured appliance back to its former glory? Our genuine Whirlpool Drawer Front could be just what you need. Specially crafted by the reputable Whirlpool brand, this OEM part comes with the promise of enduring quality and perfect fit with certain models. What makes it special? It's a key part of the Front-Pan assembly of the Crisper in your appliance. This means it plays a vital role in maintaining your appliance's effectiveness and integrity, helping it operate as smoothly as on day one. Compatibility is crucial when choosing replacement parts. That's why it's designed to work seamlessly with distinct models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef appliances. Sounds like quite the variety, doesn't it? But it's always wise to confirm the fit for your specific model. Look out for minor differences in size or shape that can make a big difference in performance. By choosing this genuine Drawer Front, you're not just buying a part, you're choosing peace of mind. This part will help you unlock the full potential of your appliance and support its high performance. Spare yourself the frustration of imperfect fits and subpar performance?opt for the high standard of your Whirlpool appliance with this Drawer Front.
Looking to bring your treasured appliance back to its former glory? Our genuine Whirlpool Drawer Front could be just what you need. Specially crafted by the reputable Whirlpool brand, this OEM part comes with the promise of enduring quality and perfect fit with certain models. What makes it special? It's a key part of the Front-Pan assembly of the Crisper in your appliance. This means it plays a vital role in maintaining your appliance's effectiveness and integrity, helping it operate as smoothly as on day one. Compatibility is crucial when choosing replacement parts. That's why it's designed to work seamlessly with distinct models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef appliances. Sounds like quite the variety, doesn't it? But it's always wise to confirm the fit for your specific model. Look out for minor differences in size or shape that can make a big difference in performance. By choosing this genuine Drawer Front, you're not just buying a part, you're choosing peace of mind. This part will help you unlock the full potential of your appliance and support its high performance. Spare yourself the frustration of imperfect fits and subpar performance?opt for the high standard of your Whirlpool appliance with this Drawer Front.
This part is used to cover the chopper blades.
This part is used to cover the chopper blades.
Installation Instructions
Patty from Caldwell, ID
Dishwasher leaving food residue on all dishes
Had to take apart dishwasher and replace chopper assembly. The dishwasher had a lot of debris in in including pieces of broken plastic forks. Now works great
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Installation Instructions
Frank from Davenport, IA
water not spraying right.
removed parts and the ordered the parts. It was very easy to order parts from Partselect. I unscrewed a few screws and the disassembly was a breeze. I then revresed my steps and the new parts were instlalled no problem. Now on the the motor replacement. Thanks Partselect.com
Installation Instructions
CHRISTOPHER from Spalding, NE
Wash Quality Was Getting Bad
The upper arm was held in by a torx screw. The shoulder on the screw held the arm in place. Once removed I simply swapped parts and installed screw. The lower arm was held on by a plastic nut with knurled edges that you can remove by hand. The arm simply lifted off and I swapped arms again. The rollers are held on by a curled plasti
... Read more
c lock that grips the wire basket.
Read less
