EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Magic Chef Dishwasher Dishracks

Popular Magic Chef Dishwasher Dishracks

The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
What this part fixes:
  • Door latch failure
  • Door won’t close
  • Leaking
Installation Instructions
William from WEST BABYLON, NY
Upper Rack wheel broke off /Front track stops replaced
The upper rack adjuster kit was replaced exactly as the video showed. I felt it was not very complicated and the new parts look more hefty then the original parts.

Front track stops was just a matter of snapping them into place.
$58.42
In Stock
This upper dishrack slide rail supports the upper rack and allows it to slide smoothly in and out of the dishwasher for easy loading and unloading of dishes. It helps keep the rack properly aligned and supported during use. If the original rail is bent, worn, damaged, or causing the rack to stick or bind, replacing it can help restore smooth movement and improve the overall function of the dishwasher. Built for everyday use, this replacement rail helps ensure the upper rack moves reliably and stays securely in place.
This upper dishrack slide rail supports the upper rack and allows it to slide smoothly in and out of the dishwasher for easy loading and unloading of dishes. It helps keep the rack properly aligned and supported during use. If the original rail is bent, worn, damaged, or causing the rack to stick or bind, replacing it can help restore smooth movement and improve the overall function of the dishwasher. Built for everyday use, this replacement rail helps ensure the upper rack moves reliably and stays securely in place.
Installation Instructions
morris from Germantown, TN
upper rack would not pull out easily
Replaced both "tracks" and the "wheels" .
Now it's like new....!!
My wife is so happy

Removed the track end caps from the tracks so I could pull out the tracks.
Removed the upper wash rack that holds dishes.
Only by removing this rack can the wheels be replaced, if I tried to replace them with the rack attached to the dishwasher I had to bend forward painfully.
Replace the old rales with new ones.
Attach new wheels to the upper rack in such a way as to allow the rack to roll inside the new rales.
Replace the end caps.
Hope it lasts another 10 years
This dishwasher rack service kit includes both upper and lower racks, designed to replace rusted, broken, or warped racks and restore your appliance’s functionality and appearance. Crafted for durability, these racks improve dish organization, ensure better spray coverage, and prevent rust transfer to your dishes. Installation is simple and typically involves transferring rollers and clips from the old racks to the new ones, requiring no special tools. This kit is an ideal solution for maintaining efficient cleaning performance and maximizing loading capacity.
This dishwasher rack service kit includes both upper and lower racks, designed to replace rusted, broken, or warped racks and restore your appliance’s functionality and appearance. Crafted for durability, these racks improve dish organization, ensure better spray coverage, and prevent rust transfer to your dishes. Installation is simple and typically involves transferring rollers and clips from the old racks to the new ones, requiring no special tools. This kit is an ideal solution for maintaining efficient cleaning performance and maximizing loading capacity.
Installation Instructions
Dennis from Littleton, CO
Tines were broken and rack was damaged
Replaced the dish rack.

Removed the retaining clips on the front of the rail and removed the old rack.

Removed the spray arm assembly from the old rack.

Assembled the new rack, with the supplied parts from the kit. Using the old rack to know where some parts needed to be placed.

Put the spray arm assembly on the new rack.

Inserted the new rack into the rails

Replaced retaining clips.
A rusty or bent upper rack can make dishes hard to load and may block the spray. The replacement rack provides storage for smaller dishes and slides along the upper rails. First check the wheels, clips, adjusters, spray parts, and rail stops for wear. These items are not included with the rack. Match the rack to the complete appliance model and compare its size and mounting points. Remove all dishes, support the rack while sliding it out, and note where each part fits. After installation, make sure the rack moves freely and cannot leave the rails.
A rusty or bent upper rack can make dishes hard to load and may block the spray. The replacement rack provides storage for smaller dishes and slides along the upper rails. First check the wheels, clips, adjusters, spray parts, and rail stops for wear. These items are not included with the rack. Match the rack to the complete appliance model and compare its size and mounting points. Remove all dishes, support the rack while sliding it out, and note where each part fits. After installation, make sure the rack moves freely and cannot leave the rails.
Installation Instructions
Allen from Jacksonville, NC
Replaced old dish racks that had rusted and had broken tines.
Took the old wheels, and other parts from the old racks and installed them on the new. The wheels on the lower rack just snap on. Also the folding tines just snapped on. On the upper rack the brackets that hold the wheels have two screws that hold the bracket. I removed them and then installed the bracket on the new rack in the same position as on the old one. The only hard part was getting the old spray arm off the old rack. I had no directions so I had to figure it out for myself. I finally cut the the old rack to get the pressure tower off. It was stuck because of having been in place for more than ten years. Putting the tower and the arm on the new rack was no problem once I had it removed. Total time to do the job about 45 minutes.
This is a basket for washing flatware or silverware in your dishwasher.
This is a basket for washing flatware or silverware in your dishwasher.
Installation Instructions
Larry from Cape Coral,, FL
Missing silverware basket.
I entered the make and model of the dishwasher into the parts store. The part was located and ordered. Received the part a few days later. Fast, efficient way to go!
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

This kit includes vinyl touch-up paint, tip tines, and instructions.
This kit includes vinyl touch-up paint, tip tines, and instructions.
This silverware basket has eight sections and is all white in color. It is also made of plastic and has a built-in handle on either side so that you can quickly and easily remove it from the dishwasher. The basket is used to hold utensils in the dishwasher and secure them in place while the dishwasher is running. This part may bend, warp, or break over time and will need to be replaced. This is a very easy replacement and requires no tools. Remove the old rack and remove the cover so you can re-use it on the new basket. You simply place the new one on the bottom rack.
This silverware basket has eight sections and is all white in color. It is also made of plastic and has a built-in handle on either side so that you can quickly and easily remove it from the dishwasher. The basket is used to hold utensils in the dishwasher and secure them in place while the dishwasher is running. This part may bend, warp, or break over time and will need to be replaced. This is a very easy replacement and requires no tools. Remove the old rack and remove the cover so you can re-use it on the new basket. You simply place the new one on the bottom rack.
What this part fixes:
  • Leaking
  • Not cleaning dishes properly
Installation Instructions
Thomas from Centennial, CO
Old shelf rack and silverware basket (yellowed & stained)
Removed the old dishrack shelf by taking off the end caps. A screw driver was used to release the plastic end caps. The old dishrack shelf is now able to just roll out and the new shelf is rolled in and the old end caps replaced. Quick and easy plus it makes the dish machine look new. The new silverware basket requires no tools just replace the old one.
The silverware basket rests in the lower dishrack and holds small utensils such as forks and knives during the dishwashing cycle.
The silverware basket rests in the lower dishrack and holds small utensils such as forks and knives during the dishwashing cycle.
This kit includes vinyl touch-up paint, tip tines, and instructions.
This kit includes vinyl touch-up paint, tip tines, and instructions.
This part is at the end of the rails to stop your dishrack from being pulled all the way out. Sold individually.
This part is at the end of the rails to stop your dishrack from being pulled all the way out. Sold individually.
Installation Instructions
Daniel from Englewood, CO
Latch and rack stop broken
I removed the 11 torx screws which hold the cover in place. Then I had to remove the electrical connectors from the old switch (a flat head screwdriver or something else to break the connection helps). The new one plugged right in, and was back into place in minutes. The rack stop was just a remove and replace. Extremely easy!!