Magic Chef Dishwasher Wheels and Rollers

Magic Chef Appliance Parts
Shop By Part Type

Popular Magic Chef Dishwasher Wheels and Rollers

Your Price
$6.86
  In Stock
Rack Adjuster
★★★★★
★★★★★
(26)
PartSelect Number PS11750255
Manufacturer Part Number WPW10204131
Sold Individually.
Installation Instructions
Randy from Glenview, IL
Replacement of broken Rack Assembly Mount with Wheel
The only piece that may be a little difficult to remove here without a tool is the 'Track Stop'. This piece has a couple of clip-like pieces that need to be depressed in order to remove it. A flathead screw driver will do the trick. Once this piece is out and you have popped the Mount off of the Rack, you simply roll the piece out of the track, roll the new one in and snap the new Mount in place, replacing the Track Stop when you are done. VERY EASY! Read more...
Your Price
$11.11
  In Stock
Lower Wheel Assembly
★★★★★
★★★★★
(17)
PartSelect Number PS11747717
Manufacturer Part Number WP99002780
This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you are moving it in or out, it could be that the lower wheel assembly needs to be replaced. The dishrack wheels allow for easy movement of the dishrack in and out of the dishwasher. These rollers tend to wear down at the same speed, so it is recommended to replace both pairs at the same time. Open your dishwasher and remove the bottom rack, locate the locking tab, and rotate until it easily slides out of place. Slide the new wheel over the shaft and locate the locking tab to snap back into place.
Fixes these symptoms
Installation Instructions
Walter from Tucson, AZ
Broken latch handle
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit. Read more...
Your Price
$39.81
  In Stock
Wheel Assembly
★★★★★
★★★★★
(11)
PartSelect Number PS11745449
Manufacturer Part Number WP8268645
Sold Individually - 4 required on rack.
Installation Instructions
Timothy from huntersville, NC
The dishtrack wheel came off the track and fell into the dishwasher and melted
I snapped on the new part onto the track. It was that easy! :) Thank goodness the part was available from Part Select!
T. Edwards
Read more...
Your Price
$9.58
  In Stock
White Dishrack Roller
★★★★★
★★★★★
(6)
PartSelect Number PS11746834
Manufacturer Part Number WP903093
This upper dishwasher dishrack roller, also known as a dishrack wheel, allows you to roll the dishwasher rack easily on the support rails. If your dishwasher rack is disconnected or the rack is broken, then replacing this part might be the solution. The first step in this repair is to remove the upper dishrack from the track, the next step is to remove the defective rack roller and replace it with the new one by sliding it onto the shaft and locking it in. No tools are required for this replacement and customers rate this project as easy. The roller is entirely made from plastic and is just over an inch in diameter.
Fixes these symptoms
Installation Instructions
Kathy from Lombard, IL
Rack roller broke
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks Read more...
Your Price
$37.98
  In Stock
Dishrack Roller Assembly
★★★★★
★★★★★
(7)
PartSelect Number PS11769236
Manufacturer Part Number W10888592
Your Price
$10.56
  In Stock
Upper Wheel Assembly
★★★★★
★★★★★
(1)
PartSelect Number PS11747718
Manufacturer Part Number WP99002781
Sold Individually.
Installation Instructions
Christopher from Upton, MA
My dog got into the kitchen by going over the dishwasher (100 lb Lab), and bent the rack tracks and broke one of the track wheels. My family wanted a new dishwasher. Whereas I am cheap.
A simple remove and replace was all it took. Remove the little latches on the end of the tracks, Slide the track out, take the broken wheels off-they snap off. Snap new wheels on rack. Slide new track in threading it through the stationary wheels attached to the wall of the unit, and through the wheels of the rack. Snap the end-caps back on. Good as new. Also replaced a fold away tine that had the plastic worn off it (=rusted). These snap out and new one in very easily. Read more...
Your Price
$10.20
  In Stock
Tub Wheel - NOT a Rack Wheel
★★★★★
★★★★★
(2)
PartSelect Number PS11747734
Manufacturer Part Number WP99002947
This wheel attaches to the inside of the tub to help guide the track and support the top rack.
Installation Instructions
Helen from Camas, WA
wheel axle broke on one of the 4 wheels that supports the top rack
I followed the directions in the dishwasher manual how to remove the top rack of the dishwasher, basically removing the stops on each side, and I set the rack on the counter. I replaced both sides even though one had not yet broken. To replace the part, 5 screws had to be removed; I used an allen wrench. The replacement location of the part was pretty obvious once the screws were removed. The inside of the plastic piece that was opened in the process of removing the defective part was dirty so I took some time to clean that out before attaching the new part. The actual unscrewing and attaching the new part probably took 10 or 15 minutes per side. It took a few tries to get the height adjusting lever to move freely before I tightened the screws. The rack works great now. Read more...
Your Price
$38.60
  On Order
Upper Rack Wheel and Mount Assembly
PartSelect Number PS11745524
Manufacturer Part Number WP8270016
This mount assembly attaches on either side of the inner cabinet wall for the upper rack. It glides over and under the the slide track.
Your Price
$6.64
  In Stock
Door Balance Wheel
PartSelect Number PS11746085
Manufacturer Part Number WP8524474
Wheel only.
Installation Instructions
Ted from CASPER, WY
One day when opening the door there was a "Snap" and the door fell open.
I first went on line to the KitchenAid repair web site and found my problem listed and instructions given . This first of all led me to a parts drawing for my model and then to the site connection to order the parts and receive the instructions. The parts arrived quickly and the instructions were thorough and easy to follow. This was a good experience for me. Read more...
Your Price
$16.71
  In Stock
Tub, Wheel Assembly
★★★★★
★★★★★
(1)
PartSelect Number PS11746098
Manufacturer Part Number WP8528831
Sold Individually.

Related Parts