
Shield
$
5.95
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11753266
Manufacturer Part Number WPW10343251
Manufactured by
Whirlpool

Check if this fits your product and find model diagrams
Need help finding your model number?
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10343251 replaces these:
AP6019955, W10343251
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kimberly
April 28, 2018
I’m looking for an insulated blanket to fit our dishwasher. We had a rat ?? problem and it just smells now.
For model number KUDC10IXWH0

Hello Kimberly, thank you for your question. The insulation blanket for your specific appliance is part number W10877094. This blanket would go up the side, across the top and down the other side of the dishwasher cabinet. Replacing this part should clear up that smell. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Floyd
October 29, 2019
What is the purpose of the shield. It does not appear with the heating on the schematic. Is it required if damaged or missiing and the heat element is working ok
For model number kudc101xbl1

Hello Floyd, Thank you for the question. The Shields help shield the Element nuts from excessive heat so they do not crack and break. Hope this helps!
Was this helpful?
Thank you for voting!
Kim
December 28, 2017
What is the purpose of the shield that is with the heating element? We replaced our heating element dishwasher still not getting hot enough to dry and sanitize. Would the next step be replace the thermostat?
For model number Wdf530plyb2

Hi Kim,
Thank you for your question. Yes, I would suggest testing the thermostat with a multi meter to check if it is working correctly or not. When testing the part it should read 0 ohms. If that part is fine, you may want to check your wiring for any damage. If your wiring is fine it may actually be your control board that is the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11753266
Manufacturer Part Number: WPW10343251
Manufacturer Part Number: WPW10343251
Brand
Model Number
Description
