This dishwasher door switch will shut your dishwasher off when the door is opened.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Door latch failure
This part works with the following products:
Dishwasher.
Part# WP99002207 replaces these:
99002207
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
George E - December 12, 2018
Verified Purchase
I lucked out. It worked!
I tried to find out from their phone support people which part I needed. The support people were useless. So, I took a guess and ordered this part. Turns out I was right. This was the correct part, and took very little time to install, even though there was absolutely no documentation available. For a very small amount of money, I saved a $150+ service call or an even more expensive appliance replacement.
★★★★★
★★★★★
Billy W - September 1, 2018
Verified Purchase
Worked as promised
Part arrived ad promised. It was easy to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher wouldn't start when door was closed.
Determined that I needed a new door switch. Bought it, then opened up the door by removing the inner panel with the six point screws. Removed one inner panel with a nut driver. Located the old switch, and wiggled it out of its mounting location. Used my Swiss Army Knife screwdriver blade to pry off the electrical connections. Plugged in t
... Read morehe new switch, and wiggled it back into place. Replaced the inner panels. The dishwasher now works again.
Read less
George from Duluth, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door switches were worn. Diswasher would not operate unless extreme pressure was applied to the door.
I pulled the interior of the door until I was able to get to the switches on the door latch. I determined at least one switch was completely worn while the other worked minimally. I then looked for the latch assembly and found out that it was no longer available. So I did some searching and found the exact switches I needed from PartSelec
... Read moret. The switches came in about 3 days which then I installed them. The dishwasher powered right up and stayed on. So in the end it was much cheaper to repair this unit than buy a new one right now. Plus, my wife is happy and so am I. Thanks PartSelect for carrying the parts I needed.
Read less
James from Rochester, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
36 of 47 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary Kay
September 15, 2017
Wondering if this part might fix my dishwasher problem. The dish washing process has been getting interrupted abruptly. When I apply pressure on the door by pushing it inwards it starts again but within minutes stops. This disruption continues through the whole dish washing process. During the drying period there is no problem. Should i give this part a try?
For model number MDB7130AWB
Hi Mary Kay,
Thank you for the question. I suggest replacing the Switch Holder, PartSelect Number PS11747662. This part latches the door securely to the switches can start the appliance. If you can push on the door and the switches engage then the switches are in working order and the holder is not keeping the door closed tightly enough.
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
November 29, 2017
Four years ago i had part numbers 99002207 replaced. Repairman replaced 2 according to the receipt. Do i need two?
For model number MDB5130AWW
Hi Steve,
Thank you for your question. Yes, you will need 2 door switches. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Henry
November 2, 2017
First off, i think my dishwasher was interrupted mid-cycle because halfway through it it stopped and a couple lights kept blinking.After turning it off/on, when I try to click a cycle, it won't start.It still gets power (i see lights), I've tried cycling the power (breaker off/on) to no avail.When I click any cycle you just hear a momentary hum (like it's trying to catch on) but then fail to, and it'll just loop that. Thoughts? Door switch?
For model number JDB3610BWX
Hi Henry, Thank you for the question. This can be an issue with the door switch or the control board. You can test the switch with a Multi Meter, the switch should read closed. If the switch is closed then you have a defective control board.Hope this helps!
