Hotpoint Refrigerator Door Shelves
Find your part
Enter your model number or a part number and click "Search"Here is an example model number plate:
Popular Hotpoint Refrigerator Door Shelves
Your Price
$29.81
Retainer Bar End Cap - Left or Right Side
PartSelect Number PS299562
Manufacturer Part Number WR2X9144
Sold individually.
Installation Instructions
rose from cleveland, OH
the little plastic thingy's were broken
I took the broken part off the bar, put the new part on the bar, snapped it into the fridge, threw the old part out, opened the fridge admired my work, while I was ther I grabbed a beer....couldnt have gone better.
Read more...
Your Price
$16.61
Door Shelf Retainer Bar End Cap
PartSelect Number PS299579
Manufacturer Part Number WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Installation Instructions
Bushnell from Gulf Shores, AL
Your Price
$13.94
Door Shelf Retainer Bar End Cap - Right Side
P.S. This may or may not help; while the refrigerator is a 'Kenmore', I found through researching that it was actually made by G.E. and branded for Kenmore. Read more...
PartSelect Number PS299259
Manufacturer Part Number WR2X8700
This is the replacement door shelf retainer bar end cap for your refrigerator. An end cap connects to the lower shelf bar on either side, and then snaps into position on the refrigerator door, allowing you to store items in the refrigerator door. To replace the end cap, simply disengage the whole bar assembly from the refrigerator door, then disengage the hook on the end cap from the rest of the bar assembly. Snap the end cap back into place, and connect it back to the refrigerator door. This part is sold individually.
Installation Instructions
Leon from Meridian, ID
Door shelf retainer bar endcap support broke
This was really a simple repair. I just kind of pried the shelf retainer bar bottom slot that holds the old endcap on out a little and was able remove the end cap and replace it with the one from 'partselect.com' and reinstalled the end cap - this was a simple repair and I'm glad that they had the part. It was also simple to find on their site. P.S. This may or may not help; while the refrigerator is a 'Kenmore', I found through researching that it was actually made by G.E. and branded for Kenmore. Read more...
Your Price
$14.39
Door Shelf Retainer Bar End Cap - Left Side
PartSelect Number PS299258
Manufacturer Part Number WR2X8699
This part is the replacement door shelf retainer bar end cap for the left side of your refrigerator door. The end cap is approximately 4 inches by 5 inches and is made of white plastic. The end cap snaps into place on the refrigerator door so you can attach the door shelf retainer bar to the inner door liner. The main reason to replace the end cap is if it is broken, and the retainer bar cannot connect to the refrigerator door. To replace the end cap, simply disconnect it from the refrigerator door and the shelf retainer bar, and replace it with a new end cap. This part is for the left side of the shelf bar only, and the cap for the right side is sold separately. This is an OEM part from the manufacturer.
Installation Instructions
Kevin from WATERFORD, VA
Bottom door shelf retainer bar end cap broke.
I slipped the new part into the bottom door shelf and installed the shelf back into the retainer holes on the door. Instant fixed.
Read more...
Your Price
$26.43
Door Shelf Retainer Bar End Cap - Left or Right Side
PartSelect Number PS298758
Manufacturer Part Number WR2X7975
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
Installation Instructions
Joyce from Flint, MI
freezer door guard broken off
I placed the new part on the end of the freezer door guard and firmly pushed it in until it 'clicked'. Easy as pie! The more difficult part was to remove the broken off part inside the opening of the freezer door hwere the new bar end was to be inserted. I finally used thin nose pliers to reach in and grab the broken off part.
Read more...
Your Price
$26.52
Door Shelf Retainer Bar
PartSelect Number PS293627
Manufacturer Part Number WR17X3880
This door shelf retainer bar is a manufacturer-approved replacement part for your refrigerator. This bar is made of white plastic and is about 21 1/4 inches in length and 2 inches deep. It helps keep your refrigerator door shelf in place. To access the retainer bar, remove the door bin by pulling it out from the mounting tabs.
Your Price
$12.56
Door Shelf End Cap
The thing I appreciate most about "PartSelect" is that they included pictures. Had it not been for the picture I would have chosen the wrong part. That is, there were two types of the part I wanted which looked very similar except on close inspection. Read more...
PartSelect Number PS298590
Manufacturer Part Number WR2X7674
Sold individually.
Installation Instructions
Charles from St. Augustine, FL
end caps broke causing brace to come out
This was a very easy repair. It did not require any tools. The thing I appreciate most about "PartSelect" is that they included pictures. Had it not been for the picture I would have chosen the wrong part. That is, there were two types of the part I wanted which looked very similar except on close inspection. Read more...
Your Price
$16.20
Door Shelf Retainer Bar End Cap
PartSelect Number PS298113
Manufacturer Part Number WR2X5795
This is the replacement door shelf retainer bar end cap for your refrigerator. An end cap connects to the lower shelf bar on either side, and then snaps into position on the refrigerator door, allowing you to store items in the refrigerator door. To replace the end cap, simply disengage the whole bar assembly from the refrigerator door, then disengage the hook on the end cap from the rest of the bar assembly. Then, simply snap the end cap back into place, and connect it back to the refrigerator door. This part is sold individually.
Your Price
$45.34
Single Door Handle End Cap Trim - Chrome
PartSelect Number PS298635
Manufacturer Part Number WR2X7791
Screws are sold separately.
Installation Instructions
Stephen from Parker, CO
End cap on opening handle was broken
First of all, finding the part was very quick and easy, which really surprised me. The repair itself took only a few minutes. Just removed the two screws holding the broken end cap, and screwed the new one back in place.
Read more...
Your Price
$8.02
Related Parts
- All Hotpoint Refrigerator parts
- Hotpoint Refrigerator Brackets and Flanges
- Hotpoint Refrigerator Caps and Lids
- Hotpoint Refrigerator Circuit Boards and Touch Pads
- Hotpoint Refrigerator Compressors
- Hotpoint Refrigerator Dispensers
- Hotpoint Refrigerator Doors
- Hotpoint Refrigerator Drawers and Glides
- Hotpoint Refrigerator Elements and Burners
- Hotpoint Refrigerator Grilles and Kickplates
- Hotpoint Refrigerator Handles
- Hotpoint Refrigerator Hardware
- Hotpoint Refrigerator Hinges
- Hotpoint Refrigerator Hoses and Tubes
- Hotpoint Refrigerator Ice Makers
- Hotpoint Refrigerator Knobs
- Hotpoint Refrigerator Lights and Bulbs
- Hotpoint Refrigerator Motors
- Hotpoint Refrigerator Seals and Gaskets
- Hotpoint Refrigerator Springs and Shock Absorbers
- Hotpoint Refrigerator Switches
- Hotpoint Refrigerator Thermostats
- Hotpoint Refrigerator Trays and Shelves
- Hotpoint Refrigerator Valves
