Hotpoint Refrigerator Drawers and Glides

Find your part

Enter your model number or a part number and click "Search"
Need help finding your model number?
Hotpoint Appliance Parts
Shop By Part Type

Popular Hotpoint Refrigerator Drawers and Glides

Your Price
$37.60
  In Stock
Drawer Slide Rail - Right Side
★★★★★
★★★★★
(51)
PartSelect Number PS306944
Manufacturer Part Number WR72X240
This drawer slide rail is for the right side of your refrigerator. The drawer slide rail attaches horizontally to the refrigerator wall and supports the drawer so it can easily slide in and out. If the drawer slide track is broken, not sliding, or the fridge is not dispensing water, replacing this part could solve the issue. Make sure to unplug the refrigerator from the power source and wear gloves to protect your hands when installing this part. Refer to the diagram provided by the manufacturer for further guidance and instruction.
Fixes these symptoms
  • Door won’t open or close
  • Not dispensing water
  • See more...
Installation Instructions
Ashley from Brandon, MS
Drawer slide broke due to overloading with beer.
First I took a beer out and opened it then took a sip. Then I went into my garage and searched for my Black and Decker power drill with a phililps head on it. Failure to locate a phillips head bit i took another sip of beer and took out one of those old fashion screw drivers. I went back into the kitchen and much to my dismay the fridge didnt fix itself. After another sip of beer I took the old slide out and took it to the outside garbage. On my way around the house my neighbor started to mock my home fix-it skills and his back yard became the new home for the broken slide. I put the new slide in, reinstalled the drawer, and filled it with beer. Read more...
Your Price
$34.05
  In Stock
Drawer Slide Rail - Left Side
★★★★★
★★★★★
(29)
PartSelect Number PS306943
Manufacturer Part Number WR72X239
This is a manufacturer-approved drawer slide rail for your refrigerator. This slide rail is for the left side of the fridge. All you need to complete this repair is a Phillips screwdriver. Remove the shelves above and below the slide rail so you have room to access it. Unscrew the slide rail and replace it with the new one.
Fixes these symptoms
  • Door won’t open or close
  • Not dispensing water
  • See more...
Installation Instructions
Anthony from Ludlow, VT
Broken plastic slide rails for drawers and trim piece.
Unscrewed the old and screwed in the new. Parts were perfect and were original brand, no knock off stuff. Good deal... Read more...
Your Price
$80.15
  In Stock
Vegetable Drawer Shelf Frame
★★★★★
★★★★★
(49)
PartSelect Number PS964313
Manufacturer Part Number WR17X11662
Frame only. Glass NOT included.
Fixes these symptoms
Installation Instructions
paul from allison park, PA
The cover cracked and was unable to hpld the crisper drawers
Removed the crisper drawers, then the glass top shelf insert, then cleaned the area before sliding in the new cover and then replacing the crisper drawers and the glass top insert. Read more...
Your Price
$102.47
  In Stock
Vegetable Drawer - Clear
★★★★★
★★★★★
(60)
PartSelect Number PS3487932
Manufacturer Part Number WR32X10834
Sold individually. This is used in refrigerator to store vegetable and fruits at an optimal temperature
Fixes these symptoms
Installation Instructions
J. Douglas from Grass Valley, CA
Broken plastic parts
Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers. Read more...
Your Price
$130.45
  In Stock
Crisper Drawer Cover
★★★★★
★★★★★
(73)
PartSelect Number PS890565
Manufacturer Part Number WR32X10398
The crisper drawer cover sits on top of your vegetable crispers and helps to maintain proper crisper temperatures. It also doubles as a sturdy lower shelf for extra storage in your refrigerator. If the drawer cover is damaged or cracked, it will not be able to do either of its jobs, and should be replaced. This replacement cover features shallow, wide grooves to prevent leaks and to catch spills. It also has rail brackets underneath to hold the drawer, allowing the drawer to slide in and out. It is made with some added structural rigidity that makes it stronger and more durable than the original. This model measures 24 1/2 inches long x 19 inches wide x 2 5/8 inches deep.
Fixes these symptoms
Installation Instructions
Kim from Bronx, NY
Vegetable pan cover broke down the middle
When the cover came to my apartment, I crossed my fingers that the piece would fit . Well, within 5 minutes the old cover was out and the new cover in. And it looks better than new! Finally, I don't have to hold my vegetable drawers up with a D battery! Read more...
Your Price
$11.12
  In Stock
Bearing Slide
★★★★★
★★★★★
(3)
PartSelect Number PS294809
Manufacturer Part Number WR1X2048
Sold individually.
Fixes these symptoms
Installation Instructions
Anthony from Ludlow, VT
Broken plastic slide rails for drawers and trim piece.
Unscrewed the old and screwed in the new. Parts were perfect and were original brand, no knock off stuff. Good deal... Read more...
Your Price
$39.23
  In Stock
Drawer Slide Rail - Right Side
★★★★★
★★★★★
(30)
PartSelect Number PS306946
Manufacturer Part Number WR72X242
This is the drawer slide rail or slide assembly for your refrigerator. You will find the drawer slide rail at the bottom of your refrigerator, mounted to the right-hand side of the cabinet wall. It is designed to hold the bottom shelf in place. You will want to make sure you are replacing the bottom rail, as the top one is a longer rail. The slide rail is held in place with two Phillips screws and is made of white plastic.
Fixes these symptoms
Installation Instructions
MARYT from KISSIMMEE, FL
the cheap plastic drawer holders broke!
Not only were the parts delivered in 2 days....but a phillips head screw driver and matching up the new rails with the old ones turned out to be a super easy and fast repair!! A monkey could do this repair!! But now I noticed the left hand top drawer rail is cracked! It stinks that the quality of the original parts are so poor...but at least I'm saving some money doing it myself!!! Read more...
Your Price
$17.89
  In Stock
Drawer Slide Rail - Right Side
★★★★★
★★★★★
(20)
PartSelect Number PS306797
Manufacturer Part Number WR72X10072
This part is the replacement drawer slide rail for your refrigerator. The crisper draw will slide in and out along this rail. If the rail is damaged or missing, the crisper will either hang from one side, or it will not stay in place at all. The drawer slide rail is for the right side of the drawer only, so be sure to check that you are replacing the correct drawer rail. This part is made of white plastic and is approximately 15 inches long and 1.5 inches wide. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Installation Instructions
Robert from Barnegat, NJ
broken slide
Removed the broken slide (two screws) replaced with the new part Read more...
Your Price
$29.03
  In Stock
Bucket Glide - Left Side
★★★★★
★★★★★
(39)
PartSelect Number PS2323481
Manufacturer Part Number WR72X10247
This is the bucket glide or bucket slide rail for your refrigerator ice maker. It connects to the wall of your freezer and allows the ice bucket to slide in and out. Your refrigerator will have a left-side and a right-side bucket glide, but this part is for the left side only. It is made of white plastic, and is sold individually.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Ryan from Deltona, FL
Glide broken and wouldn't hold ice bucket motor in place.
Removed the 3 screws using a socket set. Removed 1 screw with the broken plastic piece off of the ice bucket motor by holding the broken plastic with pliers and removed screw. Be aware that the glide rail screws are standard socket size while the ice bucket motor screw was slightly larger (don't remember the exact measurements). Attached new Bucket Glide. Fixed. Read more...
Your Price
$11.27
  In Stock
Humidity Control - White
★★★★★
★★★★★
(1)
PartSelect Number PS285231
Manufacturer Part Number WR02X10821
This part regulates the humidity of your crisper bins. It does so by opening and closing vents on the bin. If your humidity control is broken or missing, you will need to replace it. This is a genuine OEM part from GE and is sourced directly from the manufacturer.
Installation Instructions
Ronald from GROVELAND, FL
Slide control was broken
Simply slide new control slide through slot from front. Read more...

Related Parts

Back to Top