Hotpoint Refrigerator Doors

Hotpoint Appliance Parts
Shop By Part Type

Popular Hotpoint Refrigerator Doors

Your Price
$20.07
  In Stock
Dairy Door
★★★★★
★★★★★
(50)
PartSelect Number PS295579
Manufacturer Part Number WR22X10012
This is the replacement dairy door for a refrigerator. It is installed on the inner door and rotates up and down to allow access to the dairy compartment. It is made of clear plastic. If your dairy door is cracked, broken, missing, or won't stay on, you may need to replace it. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
  • Door won’t open or close
  • Not dispensing water
  • See more...
Installation Instructions
Stephanie from Tampa, FL
Dairy Door Cover had cracked
Repair took about 5 seconds. No directions necessary. Super easy. Read more...
Your Price
$25.29
  In Stock
Retainer Bar End Cap - Left or Right Side
★★★★★
★★★★★
(8)
PartSelect Number PS299562
Manufacturer Part Number WR2X9144
Sold individually.
Installation Instructions
rose from cleveland, OH
the little plastic thingy's were broken
I took the broken part off the bar, put the new part on the bar, snapped it into the fridge, threw the old part out, opened the fridge admired my work, while I was ther I grabbed a beer....couldnt have gone better. Read more...
Your Price
$20.00
  In Stock
Door Closing Cam
★★★★★
★★★★★
(15)
PartSelect Number PS297995
Manufacturer Part Number WR2X4901
This single door closure cam is mounted on the door, not the hinge.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Fridge runs too long
  • See more...
Installation Instructions
Gary from North eastham, AL
Door would not automatically close.
Symptom: Door did not close automatically. Also had found small chunks of black plastic on the floor. Refrigerator door was slightly lower than the freezer door.

One false start because I did not realize both of the door-closing cams had disintegrated and I had only ordered the cam without the hinge.

Purchased part 290199 Hinge Assembly. It came with matching door-closing cam. (Had not known so I also purchased the cam 297995 separately). Next time I will know to only purchase the Hinge Assembly.

Replacement procedure took about 20 minutes including removing and replacing door shelves and their contents. Two people involved.

1. Remove all door shelves with contents and other contents on door.

2. Remove the top Phillips head screw holding the decorative plastic on the top.

3. Remove the two top hinge screws on top of refrigerator using metric #8 socket wrench. Second person made sure door did not fall off.

4. Lift the door off the bottom hinge pin. Second person holds door on it’s side.

5. Take off the bottom refrigerator cover

6. Remove the bottom hinge assembly screws using metric #8 socket wrench.

7. Mount the replacement bottom hinge assembly and tighten the two screws.

8. On the door bottom, remove the outer screw and loosen the inner screw using metric #8 socket wrench.

9. Replace the door-closing cam (or what is left of it) with the cam in line with the door and cam bumps away from the door.

10. Place the door back on the hinge pin (one person holds while the other person maneuvers the door bottom).

11. Replace the top hinge and reinsert the screws on top of the refrigerator. Dress the door so that it does not press hard on the rubber door gaskets (or the door will fail to shut automatically). Tighten the screws.

12. Replace the decorative plastic over the top hinge.

13. Open the door and replace the bottom refrigerator cover.

14. Replace the door shelves and all contents.

15 Close the door.
Read more...
Your Price
$12.78
  In Stock
Door Shelf Retainer Bar End Cap - Right Side
★★★★★
★★★★★
(13)
PartSelect Number PS299259
Manufacturer Part Number WR2X8700
This is the replacement door shelf retainer bar end cap for your refrigerator. An end cap connects to the lower shelf bar on either side, and then snaps into position on the refrigerator door, allowing you to store items in the refrigerator door. To replace the end cap, simply disengage the whole bar assembly from the refrigerator door, then disengage the hook on the end cap from the rest of the bar assembly. Snap the end cap back into place, and connect it back to the refrigerator door. This part is sold individually.
Installation Instructions
Leon from Meridian, ID
Door shelf retainer bar endcap support broke
This was really a simple repair. I just kind of pried the shelf retainer bar bottom slot that holds the old endcap on out a little and was able remove the end cap and replace it with the one from 'partselect.com' and reinstalled the end cap - this was a simple repair and I'm glad that they had the part. It was also simple to find on their site.

P.S. This may or may not help; while the refrigerator is a 'Kenmore', I found through researching that it was actually made by G.E. and branded for Kenmore.
Read more...
Your Price
$12.78
  In Stock
Door Shelf Retainer Bar End Cap - Left Side
★★★★★
★★★★★
(5)
PartSelect Number PS299258
Manufacturer Part Number WR2X8699
This part is the replacement door shelf retainer bar end cap for the left side of your refrigerator door. The end cap is approximately 4 inches by 5 inches and is made of white plastic. The end cap snaps into place on the refrigerator door so you can attach the door shelf retainer bar to the inner door liner. The main reason to replace the end cap is if it is broken, and the retainer bar cannot connect to the refrigerator door. To replace the end cap, simply disconnect it from the refrigerator door and the shelf retainer bar, and replace it with a new end cap. This part is for the left side of the shelf bar only, and the cap for the right side is sold separately. This is an OEM part from the manufacturer.
Installation Instructions
Kevin from WATERFORD, VA
Bottom door shelf retainer bar end cap broke.
I slipped the new part into the bottom door shelf and installed the shelf back into the retainer holes on the door. Instant fixed. Read more...
Your Price
$15.45
  In Stock
Door Shelf Retainer Bar End Cap
★★★★★
★★★★★
(4)
PartSelect Number PS299579
Manufacturer Part Number WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Installation Instructions
Bushnell from Gulf Shores, AL
Bar end cap broke
Easy fix - snapped together. Read more...
Your Price
$24.47
  In Stock
Dairy Door
★★★★★
★★★★★
(14)
PartSelect Number PS2354645
Manufacturer Part Number WR22X10068
This is the replacement dairy door for your refrigerator. It is made of clear plastic and is approximately 11 inches wide and 5.5 inches long. The dairy door connects to the shelf and it can be raised and lowered to access the interior of the shelf. The main reason you would want to replace the dairy door is if your old door is cracked or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Installation Instructions
Richard from Millbrae, CA
door dairy was broken
Repair was a no brainer. More important, Part Select was extremely efficient. Customer Service was very helpful as my model number was not available on line. Thanks for your wonderful and prompt service. Rich L. Read more...
Your Price
$10.57
  In Stock
Door Shelf End Cap
★★★★★
★★★★★
(8)
PartSelect Number PS298590
Manufacturer Part Number WR2X7674
Sold individually.
Installation Instructions
Charles from St. Augustine, FL
end caps broke causing brace to come out
This was a very easy repair. It did not require any tools.

The thing I appreciate most about "PartSelect" is that they included pictures. Had it not been for the picture I would have chosen the wrong part. That is, there were two types of the part I wanted which looked very similar except on close inspection.
Read more...
Your Price
$26.79
  In Stock
Door Shelf Retainer Bar End Cap - Left or Right Side
★★★★★
★★★★★
(3)
PartSelect Number PS298758
Manufacturer Part Number WR2X7975
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
Installation Instructions
Joyce from Flint, MI
freezer door guard broken off
I placed the new part on the end of the freezer door guard and firmly pushed it in until it 'clicked'. Easy as pie! The more difficult part was to remove the broken off part inside the opening of the freezer door hwere the new bar end was to be inserted. I finally used thin nose pliers to reach in and grab the broken off part. Read more...
Your Price
$46.16
  In Stock
Dairy Door - Clear
★★★★★
★★★★★
(3)
PartSelect Number PS783785
Manufacturer Part Number WR22X10042
This dairy door is a manufaturer approved replacement part for your refrigerator. This part covers the shelf which houses food products such as butter in your fridge. It is made of clear plastic and is approximately 16 inches wide and 8 inches high. Replacing this part is easy, simply snap the old door off its mounting tabs, and secure the new one in place.
Installation Instructions
Joe from Omaha, NE
Plastic diary door broke
Removed the dairy shelf from the refrigerator door,slid the clear plastic dairy door/cover into the shelf and replaced the shelf onto the refer door. Read more...

Related Parts