Hotpoint Range Lights and Bulbs

Hotpoint Appliance Parts
Shop By Part Type

Popular Hotpoint Range Lights and Bulbs

Your Price
$5.75
  In Stock
Oven Bulb Lens Cover - Glass
★★★★★
★★★★★
(8)
PartSelect Number PS237483
Manufacturer Part Number WB25T10002
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main reason to replace the oven bulb lens cover is if it is cracked, damaged, or missing. Be sure that the lens cover is cool to the touch before you begin this repair. To remove the lens cover simply turn it counterclockwise until you can remove it. Replace it with a new cover and turn it clockwise to lock it into place. This is an OEM part sourced from the manufacturer, and it is sold individually.
Installation Instructions
Francis from LAKE ELSINORE, CA
broken light cover
twisted it in place Read more...
Your Price
$2.29
  In Stock
Lens
★★★★★
★★★★★
(4)
PartSelect Number PS1020380
Manufacturer Part Number WB25T10041
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in fact, on. The lens is a little less than half an inch in diameter and is made of plastic. If the light behind the lens still works, you should be able to simply remove the front panel and pop the damaged lens out of position, then replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Installation Instructions
william from las cruces, NM
Switch and burner dead
Removed rear panel, disconnected wires, unscrewed switch X2 - installed new parts in reverse order. Note: Would have appreciated new mounting screws with replacement switch. Read more...
Your Price
$6.57
  In Stock
Light Cover
★★★★★
★★★★★
(7)
PartSelect Number PS247415
Manufacturer Part Number WB36X192
This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it needs to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.
Installation Instructions
Edward from Ashland, MA
I Tried to remove Oven Light and got a spark that took out the Control Panel.
Oven light was easy - Snapped the Wire Bail, removed the Glass Protect and removed the buld. Installed new bulb, installed Glass Protect and snapped the Wire Bail. The Control Panel was a little harder and had to remove the 4 screws holding the metal Back Plate cover. I wrote down all the wire connections and then unplugged the wires. I took a 1/4 nutdriver and removed 4 screws holding Control panel in place and removed the Panel. The new control panel did not come with the Switch Face Plate so I removed the old one with a razor blade. The Switch Face Plate had plenty of adhessive so I just aligned the Face Plate with the Control Panel and seated it in place - thankfully it held firmly. I installed the Control Panel with Face Plate into the range and secured it with 4 screws using nutdriver. I plugged the wire connectors into the Control Panel and installed the Metal Back Plate to the range and secured it with 4 screws. Plugged the Range into the sockets and checked it for operation. Everything worked Ok including the new oven light. Read more...
Your Price
$33.91
  In Stock
Oven Light Housing
★★★★★
★★★★★
(6)
PartSelect Number PS230438
Manufacturer Part Number WB08T10002
The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, with an outside diameter of roughly four inches by four inches. To install this part, you will need a Phillips screwdriver, a nut driver, and a pair of pliers.
Installation Instructions
Jack from Okmulgee, OK
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions. Read more...
Your Price
$16.44
  In Stock
Indicator Light Kit
PartSelect Number PS1155009
Manufacturer Part Number WB49X10172
This is the replacement indicator light kit for your range. It contains 5 pieces including 2 wires, the lens, the washer, and the indicator light. The indicator light kit contains everything you need to get your indicator light to work properly. The indicator light becomes illuminated when the oven or cooktop is on. If you turn your cooktop on and the indicator light does not light up, you may need to replace it. Be sure to check the control knobs for damage as well. This is an authentic OEM part sourced directly from the manufacturer.
Your Price
$4.01
  In Stock
LENS
★★★★★
★★★★★
(1)
PartSelect Number PS1020129
Manufacturer Part Number WB25K10009
Your Price
$13.87
  In Stock
2 Pack Light Bulb - 40W
PartSelect Number PS8760365
Manufacturer Part Number 5304490731
Your Price
$5.00
  In Stock
Light Lens
★★★★★
★★★★★
(1)
PartSelect Number PS1015754
Manufacturer Part Number WB25T10042
Installation Instructions
Jewel from Nacogdoches, TX
The temperature indicator light on the oven was broken.
I removed the control panel by removing 7 screws and replaced the light indicator and lens. Read more...
Your Price
$7.02
  In Stock
LIGHT INDICATOR
★★★★★
★★★★★
(2)
PartSelect Number PS1018167
Manufacturer Part Number WB27T10668
Your Price
$16.93
  In Stock
Indicator Light
PartSelect Number PS237433
Manufacturer Part Number WB25K10002

Related Parts