Hotpoint Range Circuit Boards and Touch Pads

(8)

PartSelect Number PS3486627

Manufacturer Part Number WB27K10355

This part is the replacement electronic control board for your gas range. It is approximately 11 inches by 4 inches. The control board monitors the temperature and allows you to control the oven heat. If the touchpad will not respond, your oven will not start, or if you are having difficulty controlling the heat, you may have an issue with the electronic control board. Be sure to disconnect power from your range before you begin this repair. This is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Little to no heat when baking
Touchpad does not respond
Will not program
See more...

Installation Instructions

Brian from Taylorsville, IN

Clock wouldn't keep time

Removed the top back cover. Then removed screw for clock circuit board. swapped wires from old circuit board to new circuit board. reinstalled screws. Then replaced top back cover. Read more...

Your Price

$131.31

In Stock

CONTROL OVEN TO9 (Electric)

PartSelect Number PS8754334

Manufacturer Part Number WB18X20153

Installation Instructions

Stephen from BELLINGHAM, MA

Shorted the control panel changing bulb without shutting off power dumbass

Replaced control panel after removing original control panel facing with heat gun and Wala Read more...

Your Price

$96.60

In Stock

Oven Electronic Control

PartSelect Number PS3486630

Manufacturer Part Number WB27K10358

This part does not include the overly/touchpad. Must order separately or use original.

Fixes these symptoms

Touchpad does not respond
Will Not Start
See more...

Installation Instructions

robert from OXFORD, CT

after lightning cooktop worked oven did not

called service co. and described problem while i was looking at parts diagram and he agreed with my feeling what part got fried. he told me the part would be 183.00 plus labor and drive time. when i told him i was looking at the part on line for 65 dollars he hung up on me. i recieved the part and was slightly dissapointed to know there was a sepperate adhesive overlay. i saw that it was a sepperate part but if i knew it was adhesive i would have spent the extra 20 dollars for a new one. but, to my surprise the old one peeled off easily and gently re-apllied it to the new conrol board alighning it well seemed to be the trickiest part of the job. took the five wires with connectors out of the old one and inserted them into the same place on the new one. removed the old one from the frame (4 pan phillp sheet metal screws) and then screwed the new wired control board in. plugged in the unit and pressed the bake button and then mixed the brownie batter. replaced the back panel cover. 65 dollars and 15 minutes.

thanks

bob Read more...

Your Price

$111.48

In Stock

Oven Electronic Control Board

PartSelect Number PS783551

Manufacturer Part Number WB27T10469

Overlay must be order separately.

Fixes these symptoms

Timer will not advance
Will Not Start
See more...

Installation Instructions

Donald from Bellefonte, PA

the digital read-out on the timer went dead.

Pulled the power plug from the wall and Removed the rear top panel. Removed the 4 phillips head screws holding the timer in place and replaced it with the new. Read more...

Your Price

$84.52

In Stock

CONTROL OVEN TO9 (GAS)

PartSelect Number PS11736354

Manufacturer Part Number WB27X26656

Your Price

$28.07

In Stock

OVERLAY T09-B HP (Black)

PartSelect Number PS953650

Manufacturer Part Number WB27K10118

Installation Instructions

Rocky from HEMPHILL, TX

Electronic Control button broken

Turned off circuit breaker then unplugged range. Used nut driver to remove cover covering the control. Compared wire connections on new control vs old. Unplugged wires. Used a screwdriver to remove screws attaching controls to range. Note: these screws can drop into a spot that can make them hard to locate. Installed new overlay onto the new control and reinstalled. Plugged wires onto new control. Reinstalled rear cover over control. Plugged in power cord and turned on circuit breaker. Checked all functions. Note: order a new overlay with new control as it is adhesive backed and would be hard to remove the old one. Read more...

Your Price

$183.72

On Order

Electronic Clock Control

PartSelect Number PS239445

Manufacturer Part Number WB27X10311

***NOTE: Wiring could be different from original and will possibly need to be installed by an appliance repairperson.

Fixes these symptoms

Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

JERRY from MEMPHIS, TX

Lower Element Was Not Heating Up. Interchanged Top Broiler With Lower Element To Confirm That Lower Lement Was Working. Posted Problem On Forum. Received Reply To Change Out Electric Clock Control. Upon Doing So Lower Was Back On Line. Thanks

Upon removing the back panel of range with screwdriver to gain access to elelctric clock control. Unit was taken out with the use of a 1/4'' nutdriver. After following included instrucitons with replacement part. Part was an unpluged/pluged in operation. Works great. No service technician needed. Thanks gain. Read more...

Your Price

$90.06

On Order

Range Oven Control Board

PartSelect Number PS8768304

Manufacturer Part Number WB27K10453

The oven control board monitors the temperature and controls the oven heat. (Gas)

Your Price

$136.53

On Order

Electronic Clock Kit

PartSelect Number PS250388

Manufacturer Part Number WB50T10048

This part has been redesigned by the manufacturer. ***NOTE: The wiring could be different than the original and it will possibly need to be installed by an appliance repair person.

Your Price

$158.04

In Stock

Electronic Control - TO8 (Thermo)