EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Samsung Washer Parts

Popular Samsung Washer Parts

Your Price
$20.36
   In Stock
Samsung Washer Affresh Washing Machine Cleaner - 3 Pack
★★★★★
★★★★★
2 Reviews
PartSelect Number PS1960673
Manufacturer Part Number W10135699
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump, and internal components, helping to eliminate unpleasant smells and maintain optimal performance. Safe for use with septic systems, this cleaner is intended for monthly use?simply place one tablet in an empty washer and run a Normal Cycle with hot water or a Clean Washer Cycle. Regular use can help extend the life of the appliance and ensure fresh, clean laundry results. Always follow the instructions provided for best results.
Installation Instructions
Mary from ROANOKE RAPID, NC
Baker burner burned out.
Unplug the stove from the electric. Took out two screws in oven, placed burner into oven into the open slops and replace the screws.
Open back panel by removing two screws. Attach the two plugs to the burner and close back panel with the two screws. Plug-in stove and checked oven.
Read more...
Your Price
$91.06
   In Stock
Samsung Washer Suspension Spring
PartSelect Number PS12720841
Manufacturer Part Number DC97-16350U
THIS IS A SINGLE SHOCK, NOT A SET
Fixes these symptoms
Your Price
$53.32
   In Stock
Samsung Washer Drive Belt
★★★★★
★★★★★
23 Reviews
PartSelect Number PS4133825
Manufacturer Part Number 6602-001655
The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This goes between the drive motor and the dryer drum. The belt may have broken, which will cause the drum to not turn properly. You will need to pull your dryer away from the wall and use your Phillips screwdriver to remove the screws on the back. This is an OEM product, shipped directly from the manufacturer.
Fixes these symptoms
Installation Instructions
Christopher from SUGARLOAF, CA
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you Read more...
Your Price
$59.47
   In Stock
Samsung Washer Idler Pulley Assembly
★★★★★
★★★★★
31 Reviews
PartSelect Number PS11771601
Manufacturer Part Number DC93-00634A
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the dryer belt, allowing it to rotate the drum during the drying cycle. Over time, the pulley wheel and its bearings can wear out leading to squeaking and grinding noises when the drum rotates. The bracket or pulley wheel can also fall out of alignment which can damage the belt and cause it to slip off. Eventually, a faulty idler pulley assembly will prevent the drum from rotating altogether. Depending on your dryer model, you may need to disassemble the dryer to access the pulley assembly. Remove the dryer belt from the idler pulley wheel and detach the assembly from the dryer frame. Position the new assembly in its place and secure it in position. Thread the belt over the pulley and around the dryer drum, ensuring that the grooved side lays flat against the drum. Manually spin the drum to check that the belt is properly tensioned and reassemble your appliance.
Fixes these symptoms
Installation Instructions
Vicky from BLOOMSBURY, NJ
Belt fell off because of belt roller on the tensioner melted, ciezed and fell off
Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning! Read more...
Your Price
$40.02
   In Stock
Samsung Washer Thermistor
★★★★★
★★★★★
19 Reviews
PartSelect Number PS4204984
Manufacturer Part Number DC32-00007A
This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The most common symptom of needing a new thermistor is the dryer cycle not working. Before installing this part, you should disconnect your dryer from its power source. We also recommend you wear work gloves to protect your hands during this installation. To make this repair, the tools you will need include a multi-screwdriver, a Phillips head bit, and a flat-head bit.
Fixes these symptoms
Installation Instructions
Cynthia from JOHNSTOWN, NY
Dryer wasn’t heating
Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again Read more...
Your Price
$27.36
   In Stock
Samsung Washer Thermal Fuse
★★★★★
★★★★★
5 Reviews
PartSelect Number PS4205213
Manufacturer Part Number DC47-00016A
This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the dryer during the drying cycle. A faulty thermostat could result in clothes getting burned because the heating element does not receive the necessary signal to stop producing heat. This is a dangerous situation and could also lead to a fire. Ensure that you disconnect the power source to your dryer before you conduct this repair. This thermostat is connected to the clothes dryer unit by two screws which are sold separately.
Fixes these symptoms
Installation Instructions
Cynthia from JOHNSTOWN, NY
Dryer wasn’t heating
Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again Read more...
Your Price
$6.40
   In Stock
Samsung Washer Install Bracket
★★★★★
★★★★★
1 Review
PartSelect Number PS10058975
Manufacturer Part Number DD61-00465A
This genuine OEM installation bracket, or mounting bracket, anchors the appliance to the surrounding cabinets, so that it stays in place and does not shift during operation. They hold the unit under the countertop. Keep in mind that this replacement part is sold individually, so check how many you will need for your installation.
Your Price
$49.50
   On Order
Samsung Washer Shock Damper Rear
★★★★★
★★★★★
3 Reviews
PartSelect Number PS4212220
Manufacturer Part Number DC66-00470B
Got a problematic Whirlpool stove at home? We have the solution for you ? the Whirlpool BURNR-HEAD Base Burner (Large). It's more than just a replacement part; it's the key to getting your appliances back to performing at their best. Why is this part crucial? It's because it guarantees the combat capability of your appliances, contributing significantly to their performance and durability. Plus, its distinctive design fits seamlessly into specific Whirlpool stove models; it?s as if it was tailor-made for your appliance. But remember, while it might look similar to other parts, this base burner has a carefully crafted size and shape, unique to itself. To ensure a perfect fit for your appliance, please double-check the part number on your stove model before ordering. This way, you can feel fully confident that the part will work flawlessly with your specific model. Trust in the BURNR-HEAD Base Burner to revitalize your appliance. After all, it's not just any part - it's a genuine Whirlpool replacement part, promising quality and longevity. So why wait? Let's bring your stove back to life in no time!
Fixes these symptoms
Your Price
$103.74
   On Order
Samsung Washer Drain Pump Assembly
★★★★★
★★★★★
4 Reviews
PartSelect Number PS12592631
Manufacturer Part Number DC97-19289F
Looking to boost the functionality of your LG refrigerator? Then our genuine LG glass shelf is just what you need. Expertly designed, it offers extra room to keep your groceries, leftovers, and favorite drinks organized and within reach. Why is it so important? Your refrigerator is one of the busiest appliances in your home, and a well-fitted, durable shelf can make a world of difference. With this shelf, you'll get more out of your fridge, keeping it clutter-free and making space for all your needs. It will effectively transform your fridge into a more functional, efficient appliance that's as good as new. This LG glass shelf is tailor-made for LG refrigerators, promising a perfect fit and maximum durability. Ready to install it? Simply follow the user manual instructions. Don't forget to be safe ? it's always a good idea to wear work gloves while handling and installing your new shelf. So let's get your LG refrigerator organized, efficient, and working in top shape. Your new LG glass shelf is ready to make that happen. Enjoy the enhanced convenience and functionality it brings to your refrigeration experience.
Fixes these symptoms
Installation Instructions
Greg from Medina, OH
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump, a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump.
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Read more...
Your Price
$79.80
   On Order
Samsung Washer Shock Damper Front
★★★★★
★★★★★
3 Reviews
PartSelect Number PS4212219
Manufacturer Part Number DC66-00470A
This is an individually sold front shock absorber designed for use with Samsung dryers. Shock absorbers are used to distribute the weight of the dryer drum evenly and ensure that the different bumps and bounces that occur during the drying cycle are smoothed and counter acted. A broken shock absorber is noticeable by the amount of noise your dryer will make during operation. Replacing this absorber and its rear counterpart may even be necessary to the lifespan of the other dryer parts, so be sure to inspect both absorbers before ordering. To install this OEM shock absorber in your dryer, you will need to disassemble the dryer, which requires a screwdriver and wrench.
Fixes these symptoms

Samsung Washer Appliance Types

Related Samsung Washer Parts

Popular Samsung Washer Models

Below are the most popular Samsung Washer models we have. Enter your model number in the search box to find your model.