Samsung Washer Springs and Shock Absorbers

Your Price

$91.06

Samsung Washer Suspension Spring

PartSelect Number PS12720841

Manufacturer Part Number DC97-16350U

THIS IS A SINGLE SHOCK, NOT A SET

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Videos!

Your Price

$49.50

Samsung Washer Shock Damper Rear

★★★★★

3 Reviews

PartSelect Number PS4212220

Manufacturer Part Number DC66-00470B

Got a problematic Whirlpool stove at home? We have the solution for you ? the Whirlpool BURNR-HEAD Base Burner (Large). It's more than just a replacement part; it's the key to getting your appliances back to performing at their best. Why is this part crucial? It's because it guarantees the combat capability of your appliances, contributing significantly to their performance and durability. Plus, its distinctive design fits seamlessly into specific Whirlpool stove models; it?s as if it was tailor-made for your appliance. But remember, while it might look similar to other parts, this base burner has a carefully crafted size and shape, unique to itself. To ensure a perfect fit for your appliance, please double-check the part number on your stove model before ordering. This way, you can feel fully confident that the part will work flawlessly with your specific model. Trust in the BURNR-HEAD Base Burner to revitalize your appliance. After all, it's not just any part - it's a genuine Whirlpool replacement part, promising quality and longevity. So why wait? Let's bring your stove back to life in no time!

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Your Price

$79.80

Samsung Washer Shock Damper Front

★★★★★

3 Reviews

PartSelect Number PS4212219

Manufacturer Part Number DC66-00470A

This is an individually sold front shock absorber designed for use with Samsung dryers. Shock absorbers are used to distribute the weight of the dryer drum evenly and ensure that the different bumps and bounces that occur during the drying cycle are smoothed and counter acted. A broken shock absorber is noticeable by the amount of noise your dryer will make during operation. Replacing this absorber and its rear counterpart may even be necessary to the lifespan of the other dryer parts, so be sure to inspect both absorbers before ordering. To install this OEM shock absorber in your dryer, you will need to disassemble the dryer, which requires a screwdriver and wrench.

Fixes these symptoms

Shaking and Moving
Spinning Issues
See more...

Your Price

$56.33

Samsung Washer Damper Assembly

PartSelect Number PS11719937

Manufacturer Part Number DC97-05280W

Fixes these symptoms

Shaking and Moving
See more...

Your Price

$102.32

Samsung Washer Suspension Rod

★★★★★

1 Review

PartSelect Number PS12740434

Manufacturer Part Number DC97-16350V

This is a damper assembly for various top-load models of Samsung washing machines. This assembly is used to stabilize your washing machine during periods of high-speed spin cycles. If your washing machine is imbalanced or you notice a lot of noise and banging is produced while your washer is in use, this damper support rod may be damaged or worn down and in need of replacing. Washing machines normally feature one support rod at each corner of the washer, so four in total. Depending on your machine and its problems, you may need to replace all four support damper rods. To replace this support rod, you will need a screwdriver to gain access to the rod(s) themselves, and proper hand protection to safely remove the support rods, and the spring end of the rod is to be installed at the bottom of the washing machine. This damper rod measures approximately 28 inches long and is sold individually so it does not include any other parts or accessories.

Installation Instructions

DOUGLAS from DUNDEE, MS

Tub shaking, out of balance

Just follow the videos on this site, also YouTube.
Be sure to use the OME Parts! Read more...

Your Price

$52.67

Samsung Washer Suspension Rod

★★★★★

1 Review

PartSelect Number PS12085154

Manufacturer Part Number DC97-18610F

The suspension rod supports the washer tub and keeps it stable during unbalanced loads. DF10.5@250RPM,K0.41,L715

Installation Instructions

Wai from SAN MATEO, CA

washer was unbalance

I call Part Select and spoke with Shawn in March ,2023 ,i told him what the washer had the problem , Shawn explained to me and order 4 Suspension Rod for me , we changed them after received it and works perfect.
I had ordered the part for our refrigerator and another washer before, when we changed the parts , it worked perfect , that is why i order the parts for our appliance when we need from PARTS SELECT

All Representative are very helpful , thank you ! Read more...

Your Price

$81.84

Samsung Washer Shock Damper

PartSelect Number PS12720639

Manufacturer Part Number DC66-00470D

Introducing the original Samsung Shock Damper for your washer. This quality, OEM (Original Equipment Manufacturer) product, designed specifically for a 24" drum, offers efficient shock absorption, reducing vibrations and movements of the outer washer tub, ensuring a smooth operating washer unit. In order to maintain the unique structure of your washer, always verify this Samsung part fits your model before purchasing. Keep in mind that parts, though they may appear identical, could have slight variations in size and shape. Installation requires unplugging your washer and ensuring your hands are protected by work gloves. Embrace smoother laundry days with the Samsung Damper Shock-Module for 24" Drums.

Fixes these symptoms

Shaking and Moving
See more...

Your Price

$6.40

Samsung Washer Filter Spring

PartSelect Number PS4206844

Manufacturer Part Number DC61-02740A

Installation Instructions

Jeremy from BARDSTOWN, KY

The original cover filter was broken so I had to replace it and needed a new spring as well

It started off as supposed to be 5 minute job but took about 4 and a half hours (most of the time was vacuuming and cleaning the lint from inside the dryer as there was a lot of dryer lint built up including on the heater coils which the lint was charred black. So I went to install the cover filter and spring like in the video but my finger are larger so the spring fell off the ear/tab and fell down into the lint trap chute and into the flywheel that turns the drum so I had to remove the top and front of the dryer to retrieve the spring. That’s when I found even more lint but in the process of removing the front of the dryer I noticed one single screw holding the rear lint cover onto the dryer and so I removed that and pulled it out then with that rear cover in my hand I installed the cover filter and spring then reinstalled it. The video shows you to only remove the 3 screws to remove the front cover and then to stick your hands in the tight space and get the small spring and cover filter on and snap them into place. But if after you pull out the front cover then you will see a screw in the middle on the front side of the drum that is the the only thing holding g the rear cover in place just unscrew that and remove that cover and then you can replace the spring and cover filter and then you can put it back in and screw it back into place and then you won’t run the risk of dropping the spring down the chute like I did. If I did this trick it would have only taken me within 2 minutes to change the part...on a side note after finding all the lint I did, I would recommend taking the front and back of the dryer off and getting in there with a vacuum and cleaning it out once every year or two which will save you from a potential fire. Read more...