GE/GE_Thumb/00001739i04.gif
See part 270 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Fill Tube Clamp

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS297951
Manufacturer Part Number WR2X4754
Manufactured by GE
You May Also Need?
Product Description

Fill Tube Clamp Specifications

The fill tube clamp is used in refrigerators to support the water tube. If the tubing or hose is working but is loose inside the unit, the clamp could be broken or damaged. If this is an issue your refrigerator is experiencing, replacing the clamp can be the solution. These tube clamps are sold individually and the screw is not included. Make sure to unplug your refrigerator from the power source before installing this part. Refer to the manual provided by the manufacturer for further instructions on this repair.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator, Ice Maker, Wine and Beverage Cooler.
This part works with the following products:
General Electric, Kenmore, Hotpoint, RCA.
Part# WR2X4754 replaces these:
AP2058413, 296822, SWR01X5223, SWR02X4754, SWR1X5223, SWR2X4754, WR01X5223, WR01X5363, WR02X4085, WR02X4754, WR1X5223, WR1X5363, WR2X4085
Questions and Answers

Be the first to ask our experts a question about this part!

Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Water leak from cracked Icemaker Water Line
This repair was done on a 13 year old fridge. Within the last several years I had to replace the Incoming Water Line twice, the line from the Inlet Water Valve to the Dispenser Water Reservoir, and this time the Icemaker Water line. These were all due to the plastic tubing hardening and becoming brittle from the heat of the compressor.

For this repair, I not only replaced the cracked Icemaker Line, I replaced the Incoming Water Line with copper, and replaced the Dispenser Water Reservoir. If you have a leak in one of the plastic water lines around the Valve Assembly, I recommend you do the same.

The Icemaker Water Line instructions from Stephen from Raleigh was very helful and complete.

I found Scot from Fort Collin's instructions on replacing the Reservoir very helpful too. Although I found his comment that one line was too short, to not be the case. In fact I had to trim both lines because they were too long.

Scott from South Lake Tahoe's suggestion to use the old Reservoir Lines to fish the new ones is good. I used duct tape to attach them together instead of drip irrigation fittings, and it worked fine. It helps to have somebody at the back of the fridge to pull the line while you push it from inside the fridge.

The line to the door connection can be accessed by removing the grill at the bottom of the front of the fridge.

Pretty easy repair. Thanks to the other contributors for the help!
Other Parts Used:
1/4 Tubing Nut Icemaker Water Line Fill Tube Grommet Icemaker Fill Hose Extension Insert - 5/16 Inch Dispenser Water Reservoir Plastic Tubing - 5/16 Inch
  • Joe from Glenmoore, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
23 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking into Freezer from Ice Maker
Disregard previous.
1. Turn off water supply.
2. Unplug power cord.
3. Remove bottom Panel to access the Solenoid valve.
4. Remove the water lines from the Valve.
5. Remove the Valve from the refrigerator.
6. Remove the electrical connectors from the valve.
(make sure the new valve has the connector adaptors included) you will need them during installation.
7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line.
8.Use a pair of pliers to braek away the plastic on the new valve for clearance.
9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature.
10.Install the bottom 2 water lines they are different sizes
11.Mount the new valve to refrigerator and tighten.
12.Install the ice maker water line to the top fitting on the valve.
13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve.
Other Parts Used:
Water Tubing Clip Dual Inlet Water Valve Plastic Tube - 1/4 Inch 1/4 Tubing Nut Icemaker Fill Hose Extension Water Tube Union - 5/16" x 5/16"
  • Louis from Kingwood, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
18 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit making ice
First I shut off water supply and drained line. Then I unplugged power to refrigerator. I then removed the back lower cover from the refrigerator and removed the water supply line from the water valve. I then removed the water valve from the unit then removed the wiring harness from the assembly. Then I cut the plastic lines from the old valve assembly and inserted them in the new valve assembly, one at a time to avoid crossing lines. I reinstalled valve assembly and rear cover on the refrigerator. After turning on the water and plugging in power it took a bit for the air to work itself out of the icemaker supply line.
Other Parts Used:
Water Valve and Bracket Assembly Icemaker Fill Hose Extension Fill Tube Grommet
  • William from Katy, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable), Wrench set
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS297951
Manufacturer Part Number: WR2X4754
Brand
Model Number
Description
Kenmore
36350221000
Refrigerator
Kenmore
36350222000
Refrigerator
Kenmore
36350227000
Refrigerator
Kenmore
36350232000
Refrigerator
Kenmore
36350237000
Refrigerator
Kenmore
36350242000
Refrigerator
Kenmore
36350247000
Refrigerator
Kenmore
36350622000
Refrigerator
Kenmore
36350627000
Refrigerator
Kenmore
36357552790
Refrigerator
Kenmore
36357552791
Refrigerator
Kenmore
36357557790
Refrigerator
Kenmore
36357557791
Refrigerator
Kenmore
36358042893
Refrigerator
Kenmore
36358042894
Refrigerator
Kenmore
36358042896
Refrigerator
Kenmore
36358042897
Refrigerator
Kenmore
36358047893
Refrigerator
Kenmore
36358047894
Refrigerator
Kenmore
36358047896
Refrigerator
Kenmore
36358047897
Refrigerator
Kenmore
36358062890
Refrigerator
Kenmore
36358062891
Refrigerator
Kenmore
36358062892
Refrigerator
Kenmore
36358062893
Refrigerator
Kenmore
36358062894
Refrigerator
Kenmore
36358062896
Refrigerator
Kenmore
36358062897
Refrigerator
Kenmore
36358067890
Refrigerator
Kenmore
36358067891
Refrigerator

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service