298725-1-M-GE-WR2X7927 -Icemaker Fill Hose Extension
Part Location Diagram of WR2X7927 GE Icemaker Fill Hose Extension
See part 269 in the diagram
( Grid squares measure 1x1 inch )
298725-1-S-GE-WR2X7927 -Icemaker Fill Hose Extension 298725-2-S-GE-WR2X7927 -Icemaker Fill Hose Extension 298725-3-S-GE-WR2X7927 -Icemaker Fill Hose Extension Part Location Diagram of WR2X7927 GE Icemaker Fill Hose Extension
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Icemaker Fill Hose Extension WR2X7927

★★★★★
★★★★★
2 Reviews

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 32.38
  Special Order

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS298725
Manufacturer Part Number WR2X7927
Manufactured by GE for General Electric, Kenmore, Hotpoint
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator.
Part# WR2X7927 replaces these:
AP2059766, 298208, WR02X7927
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Matthew R - June 18, 2019
  Verified Purchase
Perfect fit
The part was in great condition & exactly what we needed to fix our icemaker
★★★★★
★★★★★
John C - December 4, 2018
  Verified Purchase
JUST WHAT I NEEDED
THANKS...……...
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leak from cracked Icemaker Water Line
This repair was done on a 13 year old fridge. Within the last several years I had to replace the Incoming Water Line twice, the line from the Inlet Water Valve to the Dispenser Water Reservoir, and this time the Icemaker Water line. These were all due to the plastic tubing hardening and becoming brittle from the heat of the compressor.
Other Parts Used:
1/4 Tubing Nut Icemaker Water Line Fill Tube Grommet Icemaker Fill Hose Extension Fill Tube Clamp Insert - 5/16 Inch Dispenser Water Reservoir Plastic Tubing - 5/16 Inch
  • Joe from Glenmoore, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
24 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water spraying in the freezer
It was very simple. From turning off the water and draining the line to unscrewing the controller, disconnecting the line and etc. Putting everything back together was easy as well. Most of my time was spent cleaning below the frig and back.

The only thing I wish I purchased a new hose clamp.
Other Parts Used:
Dual Inlet Water Valve Icemaker Water Line Fill Tube Grommet Icemaker Fill Hose Extension
  • Amy from Holliston, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
7 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The icemaker was leaking water into the freezer, causing the freezer to be covered inside with ice.
The actual repair was a snap. However, be sure you check to make sure all of the parts are there. The two electrical adapter/connectors were missing from the water valve package, so I could not complete the job until a new valve could be shipped. The two adapters are essential to proper operation of the water valve. New ones arrived in 3 days.

DISASSEMBLY:

1. Unplug the refrigerator.
2. Shut off the water supply to the icemaker.
3. Remove the screws holding the cardboard cover onto the lower back side of the refrigerator, using a nut driver.
4. Disconnect the water supply line from the top of the water valve.
5. Remove the screw holding the water valve bracket onto the back of the refrigerator.
6. Unscrew the two water feed tubes from the water valve (one goes to the icemaker and one to the cold water dispenser).
7. Pull the two electrical connectors straight out of the back of the water valve. They are color-coded, but it won't hurt to label them with a small piece of masking tape.

NOTE:

Since I wanted this to be fixed and to not have to deal with it for years to come, I also replaced the plastic tubing running up the back of the refrigerator, the grommet that goes through the back of the refrigerator into the freezer compartment, and the water tube the pours water into the icemaker's tray - and it was well worth the few extra dollars and 10 extra minutes of work. To do this part:

1. Inside the freezer section, loosen the two screws holding the icemaker to the back of the freezer (you do not need to remove the screws, but it won't hurt anything if you do remove them).
2. Slide the icemaker upward until it clears the two screws enough that you can set the icemaker out of the way.
3. Grasp the 1/2-inch plastic tube that points toward the front of the freezer and pull it toward you until it comes out.
4. At the back of the refrigerator, pull out the plastic grommet that held the tube you just removed, near the top of the refrigerator.
5. Remove the thin water tube that runs from the water valve up the back of the refrigerator to the grommet.

ASSEMBLY:

1. Basically, reverse the order of disassembly.

CONCLUSION:

It took longer to type the instructions than it would have taken to do the job. If only the elctrical connectors had been there the first time.
Read less
Other Parts Used:
Dual Inlet Water Valve Icemaker Water Line Fill Tube Grommet Icemaker Fill Hose Extension
  • Stephen from Raleigh, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
94 of 109 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
October 26, 2024
WHAT IS THE THE OUTSIDE DIAMENTER AND INSIDE DIAMENTER OF THE HOSE WR2X7927. I'M HAVING TROUBLE FINDING HOSE THAT WILL GO THROUGH HOLE ON INSIDE OF FREEZER LEADING TO ICEMAKER . OUTSIDE TO OUTSIDE WIDTH NO MORE THAN 4/8 IN. DOES THIS HOSE MATCH NUP TO THE FILL TUBE GROMMET PART #
For model number TFH27PRSMWW
PartSelect logo
Hello Tim, thank you for your question. The correct hose for your model and icemaker is PS292878. Hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Plastic Tubing - 5/16 Inch
$24.87

  In Stock
  • 1
Back to Top
You May Also Need ?
Dual Inlet Water Valve
$61.52
  In Stock
Water Tubing Clip
$8.06
  In Stock
Fill Tube Grommet
$31.92
  In Stock
Fill Tube Clamp
$8.43
  Special Order
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

Contact Customer Service
Icemaker Fill Hose Extension
$ 32.38
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.