When energized, this part releases water from the supply line into the ice mold.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10238100 replaces these:
AP6017532, W10238100, W10498992
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
33 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
January 3, 2019
Water is not flowing into the ice tray to make ice, however water through the door is working fine. Also we replaced the ice maker itself with no help.
For model number KRSC503ESS00
Hello Linda, thank you for the question. This sounds like an issue with the Water Inlet Valve, PartSelect Number PS11753250. The ice maker side could be blocked or defective. You can also check to see if the water filter needs to be replaced or if the water lines are froze. Hope this helps, good luck with this repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Valarie
February 8, 2018
Water sprays out at white water line connection when using dispenser. Do i need to replace whole water inler valve or can i just replace the line connector
For model number GSF26C4EXW00
Hi Valerie,
Thank you for your question. If water is spraying out of the white water line connection on the water inlet valve, then you will need to replace it. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
March 21, 2018
Water dispenser and ice maker make a clacking noise and low water coming out l just replaced filter
For model number WRF560SEYM02
Hello Rich, thank you for your question. It sounds like there is air in the water lines. This happens sometimes when the filter is replaced. Remove the filter and soak it in water. Reinstall the filter and see if that helps the issue. If not, you may need to bleed the lines by depressing the water paddle at the dispenser and let it flow for 5 second. Remove the glass and wait another 5 seconds. Repeat until the water flows continuously and fills 2 or 3 full water glasses. There are also videos online that will show you how to remove air from the water lines on the fridge. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stanley
January 7, 2019
Water not flowing sometimes. Changed filter, sometimes it works and sometimes it doesn't
For model number WRS526SIAH00
Hello Stanley, thank you for your question. First we would recommend removing the filter to see if the water works consistently. If it does, you have an issue with the filter or filter housing. If the issue persists with the water filter out, test the water valve to be sure its working. If those parts are not the issue, the dispenser control board may be the culprit. Here is a link that will give information on testing that valve.
https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kelvin
August 12, 2017
Does your water valve match existing valve: Inversys K-77473 W10228100 and does yours include solenoid?
For model number GSF26C4EXY02
Hi Kelvin,
Thank you for your inquiry. Yes, this valve does have the matching sticker information with K-77473. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
June 7, 2019
Ice maker wants to fill but no water coming in
For model number KFFS20EYMS00
Hi Brian, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
PAMELA
August 6, 2019
Ice maker does not fill with water. Changed water inlet valve and replaced ice maker. Still nothing. Shut off arm stuck in off position. Not frozen wàter line. Changed filter.What else could it be?
For model number 106.5113
Hello Pamela, thank you for inquiring. There are two water valves that can affect this. There is Single Primary Water Inlet Valve part number PS11750831 and Inlet Valve part number PS11753250 for your model. I would recommend replacing whichever one you have not already. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
November 18, 2019
The ice maker stopped making ice. I have replaced the water filter which helped for a little bit, but now no ice. The water line and pressure are good and the ejector arm moves freely so i'm at a loss. Any thoughts? Thanks
For model number KSF26C4XYB03
Hi Stephanie,
Thank you for your question. If the ice maker is not making ice and you have already replaced the water filter, there are some other parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=KSF26C4XYB03&mfgModelNum=&fkMfgID=3&ModelMasterID=367587&PID=12. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rajeev
December 6, 2018
Hello
My fridge( Whirlpool model # gsf26c4exy03) was not making ice, so i opened the icemaker unit and manually filled the ice tray and after 2 hour the ice maker harvested the ice, but the autofill of tray is not happening. I already replaced the water filter and some forum suggested. Door water dispense is also working fine.Not sure what the issue is.
appreciate your help in advance.
For model number GSF26C4EXY03
Hi Rajeev,
Thank you for your question. If your ice maker is not making ice, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the ice maker motor, the ice maker, the water filter, the coupling, the bi-metal defrost thermostat, and the water inlet valve. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pam
July 29, 2019
Side by side in door ice maker does not fill with water. Shut off arm stuck in off position . Is it the ice maker? We checked the temps, we tried the reset, we changed the filter. Is it the ice maker itself that is the problem?
For model number 106.5113
Hi Pam, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water inlet valve was leaking / the Snack Pan was broked
I replaced the water inlet valve perfect match and also replaced the snack pan perfect match. I'm glad I ordered from Whirlpool. was also cheaper than other sites.. thanks.
Unhooked water line from house to fridge then unbolted valve from fridge body then removed plastic water line from fridge to valve by pushing in on pex release tab then reversed process with new valve. Works like a charm. No more leakage. Wood floor is dry and Happy!
Steven from WEST JORDAN, UT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking from the back of the frig. Issue was the unit that the feed hose screwed into was leaking.
At first ordered the wrong part. Using the website was difficult to find the correct part, but once I called, it was pretty easy to find the part needed. Part showed up and install was only a few minutes. No more leaking!
Thanks for the help PartSelect!
Jeff from LAKE OSWEGO, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking around icemaker hose going in to part
Took lower back board off, took part off to expose it so I could see where it was leaking, got part number, ordered it. Shut off water to frig at wall shut off, unhooked both hoses and plug, hooked new part up, turned water back on. Watched couple days to make sure it wasn't leaking. Vacuumed out back good, which I was amazed didn't really need it, hooked part back in place, replaced back with screws.
Cathy from LASCASSAS, TN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
15 Reviews
4.9
Filter By Rating:
5 Stars
13
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert M - April 9, 2023
Verified Purchase
part was perfect fit
Part was a perfect fit , it fixed the issue with no water from door,also ice was working. Water stopped working again about a month later ,, was not the part needed to fix the problem I guess.
★★★★★
★★★★★
Jules S - September 26, 2022
Verified Purchase
Water inlet valve
The part I received was delivered in about five days.It was an easy repair but my fridge is only 4 years old.So I don’t think the part should have failed but anyway it’s all fixed.But after my purchase I saw the same part for about $50 less.
★★★★★
★★★★★
Billy S - March 10, 2022
Verified Purchase
The exact replacement part
The website showing a break down of different sections of the refrigerator made it the easiest way I have ever seen to locate the exact item I needed. The exact part was listed and shown on the parts breakdown. Ordering was simple and fast. Thanks for what you do. I will definitely return here when I need anything else for our frig.
Thank You
★★★★★
★★★★★
BARBARA W - October 21, 2021
Verified Purchase
Happy Refreshment Center
Glad to have ice and water without opening the refrigerator and freezer doors. The part was exactly what I needed. No more leak !. Thanks.
★★★★★
★★★★★
Ken T - September 7, 2021
Verified Purchase
Came in a timely manner
Came in a reasonable amount of time. Was correct part. All good
★★★★★
★★★★★
Roger K - July 3, 2020
Verified Purchase
Water valve
The part was perfect and easy to install
★★★★★
★★★★★
Brian K - June 1, 2020
Verified Purchase
Easy fix, saved me a ton of money calling someone
When I went to get water out of my fridge, and heard a "bang", and next thing I knew there was water gushing out of the back of my fridge and my kitchen flooding, I had no idea what was going to be wrong besides the water supply line rupturing. Turns out, thanks to this site and it's very informative reviews and videos, I narrowed it down to this culprit after pulling out the fridge and ensuring the water line was not ruptured. Sure enough, this valve had cracked open at one of the plastic seams and had "exploded" open. VERY easy fix, was the exact replacement part, and I know it saved me A LOT of money from calling a professional to fix something that almost anyone can do. HIGHLY recommend! I have bought many parts from this site before and will continue to do so when needed!
★★★★★
★★★★★
Jonathan P - October 17, 2019
Verified Purchase
Fixed my leak!
I noticed my fridge leaking water from the valve, I tried repairing it with JB weld without success. I ordered the valve, very easy installation, fixed my leak!
★★★★★
★★★★★
Daniel W - October 2, 2019
Verified Purchase
great
went great
★★★★★
★★★★★
Steven G - June 30, 2019
Verified Purchase
Part worked as expected
Single valve for Whirlpool refrigerator. Easy to install. No more leaks
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750831
Manufacturer Part Number: WPW10238100
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
