All Installation Instructions for 1746

Broken end caps on oven door

Very easy fix. After removing the six screws that held the door together, it was a cinch to replace the end caps and put the door back together. Works just like new!!

Parts Used:

Door Handle End Cap

christine from solsberry, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

oven door handle broke

My son took care of removing the broken parts, opening the door and replacing the new handle ends and then finished! It was easy watching him do the work!!!

Parts Used:

Door Handle End Cap

Sheila from Douglasville, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Broken v-belt for drive

I returned the belt because it was the wrong part. Ordered the correct belt from another source. After that the replacement went well and I crossed off Parts Select from my list.

Parts Used:

Ground Drive V-belt

Paul from ROCKTON, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set

2 of 7 people found this instruction helpful.

Was this instruction helpful to you?

End caps very difficult to get on the handle bar

This the second time in three years the end caps broke. The first time the replacement end caps slid right on but, this time it was an extreemly tight fit. I had to sprsy white greese on the handle bar and inside the end cap and, even then I thought the end caps would break it was so hard to get on.

Parts Used:

Door Handle End Cap

Jim from Southlake, TX
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Broke ed cap on oven door

Repair was basically simple. Remove 6 screws holding door facing on door, remove one screw holding handle end caps in place. Then reverse the operation installing handle end caps. The problem I had was that the new a end caps had different dimensions than the old ones and the handle wouldn't slip into them. Had to carve away material inside the new caps with an exacto knife in order to fit the handle. The result was a 15 minute job took well over an hour

Parts Used:

Door Handle End Cap

HAROLD from LODI, CA
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Take the wheel off. Place the key in the slot. Put the wheel back on.

Just described it.

Parts Used:

Lawn Mower Key

Gary from PILESGROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Front wheels, too much end play

Shimmed the wheels out on axle.. No more slop.

Parts Used:

Lawn Mower Washer

Frederick from BINGHAMTON, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

10 of 38 people found this instruction helpful.

Was this instruction helpful to you?

End Cap broke on oven door.

It was easy as pie. Just followed the instructions.

Parts Used:

Door Handle End Cap

Georgianna from Austin, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Plastic end caps for oven door handle brokr off

When the replacement parts came (only took 2 days). I lifted the door off. Removed the screws that held the tempered glass front on the rest of the door. Removed the screws holding the broken end caps Replaced one end cap, inserted the handle, and fitted the 2nd end cap to the handle and screwed it in place. Screwed the front of the door to the back and replaced the door on its hinges. Easy as pie, ....Easier!

Parts Used:

Door Handle End Cap

Ben from The Hills, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Trim has tendancy to rust on range oven door

Unscrewed bottom screws, replaced trim. No trouble.

Parts Used:

Bottom Trim - White

Carole from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

replace end caps

The video was very helpful.Very easey repair

Parts Used:

Door Handle End Cap

Thomas from Glen Island, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Left bracket broken on range oven door handle.

Using a torx screwdriver, I removed the old handle bracket. I had to be careful not to lose a metal spacer that went between the back of the door front panel and the back of the inside door panel. With the door in full open position, I was able to hold this spacer in my thumb and fore finger while I removed the screw. The broken portion of the handle bracket fell to the floor. With the old handle removed, I placed the screw through a hole in the inside panel, through the spacer and through a hole in the front panel. While holding the front pull bar in the right handle bracket, I placed the new bracket on the bar holding it in position on the door and attaching the screw. Easy peasy!

Parts Used:

Door Handle End Cap

Roger from De Soto, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Oven Door Handle End Caps.

I purchased my stove second hand. It was a mess but I saw a gem under all that dirt and grime. It took me a week and it looked brand new. The end caps on the oven door handle were discolored and cracked. They made the stove look old. It was an easy repair and my stove looks brand new. I will order an extra set just in case as these parts are getting harder and harder to find. I am so pleased with the original parts. They were here with in days and well before promised delivery date.

Parts Used: