KitchenAid Refrigerator Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular KitchenAid Refrigerator Hoses and Tubes
Your Price
$44.23
In Stock
KitchenAid Refrigerator P-trap Drain Tube Kit
PartSelect Number PS8691807
Manufacturer Part Number W10619951
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.
Fixes these symptoms
- Freezer not defrosting
- Fridge too warm
- Frost buildup
- See more...
Installation Instructions
Jack from DINUBA, CA
Water leaking from bottom of refrigerator onto floor
The video on website is very good and explains everything in detail. Just follow the directions. This is EASY!!!!
Read more...
Your Price
$11.77
In Stock
KitchenAid Refrigerator Ice Maker Water Fill Tube Kit
PartSelect Number PS11739222
Manufacturer Part Number WP2196157
The icemaker water fill tube provides water to the icemaker so it can produce ice and dispense water. If you notice that your ice maker is not making or dispensing ice, or is leaking, you may need to replace the water fill tube. This water fill tube kit comes with a fill tube and a compression nut. This part is made of white plastic and is approximately 10 inches in length. The ice maker water fill tube is in the rear of the fridge. To complete this repair, you will need a 1/4 inch nut driver and a utility knife. Before beginning this repair, you may want to disconnect the water and power supply to the refrigerator.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Leaking
- See more...
Installation Instructions
Charles from Orland Hills, IL
Broken elbow on icemaker water fill tube.
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done.
Read more...
Your Price
$56.33
In Stock
KitchenAid Refrigerator Water Tube
PartSelect Number PS12745424
Manufacturer Part Number W11415785
This water fill tube is a genuine OEM part that is compatible with various models of refrigerator. It is a small plastic tube that supplies water to the ice maker tray. It is typically located at the back of the refrigerator, where it runs from the water inlet valve to the ice maker assembly. When the ice maker needs to produce ice, water flows through this tube and fills the ice maker tray, where it freezes into ice cubes. The fill tube is an essential component of the ice maker system, ensuring a steady supply of water for ice production. If the fill tube becomes clogged or damaged, it can water leaks inside the refrigerator and also lead to difficulties producing ice when needed.
Fixes these symptoms
- Ice maker not making ice
- Leaking
- See more...
Installation Instructions
Jenny from PHOENIX, AZ
spraying water from the connection on top of fridge
just like the video showed, removed the cover parts inside the fridge, disconnected the water tube inside and pulled out from the top of fridge, then inserted new water tube.
Read more...
Your Price
$47.40
In Stock
KitchenAid Refrigerator Filter Inlet Water Tube
PartSelect Number PS886401
Manufacturer Part Number 8201597
This refrigerator water filter inlet tube kit is a genuine OEM component designed to deliver water from the household supply to the refrigerator’s filtration system, supporting both the ice maker and water dispenser. The tubing begins with a 1/4-inch diameter and transitions to 5/16-inch, ensuring compatibility with various Whirlpool refrigerator models. The kit includes the inlet tube, a PVC sleeve, an adhesive sheet, and an instruction guide for proper installation. Over time, the inlet tube may become clogged, cracked, or damaged, leading to reduced water flow, leaks, or malfunctioning ice production. Replacing this part restores efficient water delivery and helps maintain the appliance’s performance and reliability.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Installation Instructions
George from Hernando, MS
Pur Water filter ruptured could not remove from housing
Removed two screws holding the filter housing. Pulled filter and housing out far enough to remove inlet and outlet lines.Replaced inlet and outlet lines( precautionary) in filter housing, installed new filter.
Read more...
Your Price
$27.36
In Stock
KitchenAid Refrigerator Water Tube Kit
PartSelect Number PS11730901
Manufacturer Part Number W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Ice maker not making ice
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Trent from Tacoma, WA
water dispenser started leaking
i wasn't sure it was the inlet valve unit because the leak was at the water dispenser in the freezer door. after some research it looked like the water inlet valve located in the back lower part of the refrigerator was the problem. to replace, take off the cardboard cover, about 6 screws, you have access to the water inlet valve, disconnect the hoses (i think it goes without saying that you should have turned off the water to the frig) replace the inlet valve, connect hoses, turn water back on and you'll be back in business. very easy repair.
Read more...
Your Price
$23.60
In Stock
KitchenAid Refrigerator Water Tube Connector/union 5/16 To
When aI received the hose adapter/connector, I inserted the 2 hose ends only to have water drip from the connection.
I used a utility knife to remove an inch from each side, then reinserted the hoses. That made the differnce. Dry as a bone.
LG Read more...
PartSelect Number PS11740187
Manufacturer Part Number WP2300868
Sold Individually. - * Part may differ in appearance, but functions same as original.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Leo from Salem, SC
Had to replace a hose connector at the base of my refrig/frreezer
Perhaps a helpful hint:When aI received the hose adapter/connector, I inserted the 2 hose ends only to have water drip from the connection.
I used a utility knife to remove an inch from each side, then reinserted the hoses. That made the differnce. Dry as a bone.
LG Read more...
Your Price
$103.32
In Stock
KitchenAid Refrigerator Nozzle And Tube Kit
Thanks for the fast service... Read more...
PartSelect Number PS11742481
Manufacturer Part Number WP4388152
This kit is intended for use with refrigerators that have a water dispenser in the door.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Robert from Abingdon, MD
water dispenser tube broke
To put the new tube in, I cut the old tube before the Y piece(screw to door part) and taped the new hose to it. I pulled the old tube from the bottom of the door, while gently pushing/feeding the new hose in until the new hose was at the bottom of the door. Connected the new hose(top/bottom) and turned the water back on. All of 7 minutes.Thanks for the fast service... Read more...
Your Price
$75.13
In Stock
KitchenAid Refrigerator Water Dispenser Fitting And Tube Assembly
PartSelect Number PS886371
Manufacturer Part Number 8201537
Anti drip valve NOT included.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Conrad from Tucson, AZ
The Water Dispensor Tubing Had Become Brittle And Broke .
Removed the face plate. Removed a few screws and unpluged a few electrical connectors and pulled apart. Removed the holding bracket and clear tubing from door. Cut new tubing at an angle to push through conduit. Reinstalled new bracket and re-installed electrical connectors. Snapped face trim on and bleed air out of system. . Water ran great.
Read more...
Your Price
$42.12
In Stock
KitchenAid Refrigerator Drain Tube
PartSelect Number PS12711022
Manufacturer Part Number W11190084
Introducing the Drain Tube from Whirlpool, an innovative solution designed to keep your refrigerator functioning optimally. Distinctively crafted, this genuine OEM drain tube is an essential part of your appliance, directing water from the drip tray to the drain conduit. Built for compatibility, the drain tube seamlessly works with various models of Whirlpool refrigerators. Prior to installation, ensure the safety of the process by unplugging your refrigerator and wearing work gloves for hand protection. Trust this vital Whirlpool component for longevity and your refrigerator's ideal performance. Please be sure to confirm the accuracy of your model before making a purchase to ensure a perfect fit.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Linda from GREENCASTLE, PA
linking water out of underneath of bottom freezer
took back off refrigerator read directions that was sent with parts and replaced the wore out drain nozzle . Even this 70 year old woman could do this her self and changed air filter in refrigerator also
Read more...
Your Price
$9.62
In Stock
KitchenAid Refrigerator Thermostat Sensor Barrier
PartSelect Number PS11739216
Manufacturer Part Number WP2196003
The thermostat sensor barrier covers and insulates the temperature control thermostat capillary tube.
Installation Instructions
Ronald from MONROE TWP, NJ
Very easy to follow.
I just did what the instructions outlined and the job was done fast.
Read more...
Related KitchenAid Refrigerator Parts
- All KitchenAid Refrigerator parts
- KitchenAid Refrigerator Brackets and Flanges
- KitchenAid Refrigerator Caps and Lids
- KitchenAid Refrigerator Circuit Boards and Touch Pads
- KitchenAid Refrigerator Compressors
- KitchenAid Refrigerator Deflectors and Chutes
- KitchenAid Refrigerator Dispensers
- KitchenAid Refrigerator Doors
- KitchenAid Refrigerator Drawers and Glides
- KitchenAid Refrigerator Drip Bowls
- KitchenAid Refrigerator Ducts and Vents
- KitchenAid Refrigerator Electronics
- KitchenAid Refrigerator Elements and Burners
- KitchenAid Refrigerator Fans and Blowers
- KitchenAid Refrigerator Filters
- KitchenAid Refrigerator Grilles and Kickplates
- KitchenAid Refrigerator Handles
- KitchenAid Refrigerator Hardware
- KitchenAid Refrigerator Hinges
- KitchenAid Refrigerator Ice Makers
- KitchenAid Refrigerator Insulations
- KitchenAid Refrigerator Knobs
- KitchenAid Refrigerator Lights and Bulbs
- KitchenAid Refrigerator Manuals and Literatures
- KitchenAid Refrigerator Motors
- KitchenAid Refrigerator Panels
- KitchenAid Refrigerator Power Cords
- KitchenAid Refrigerator Seals and Gaskets
- KitchenAid Refrigerator Sensors
- KitchenAid Refrigerator Switches
- KitchenAid Refrigerator Tanks and Containers
- KitchenAid Refrigerator Thermostats
- KitchenAid Refrigerator Trays and Shelves
- KitchenAid Refrigerator Trims
- KitchenAid Refrigerator Valves
- KitchenAid Refrigerator Wheels and Rollers
- KitchenAid Refrigerator Wire Plugs and Connectors