My Orders
KitchenAid Refrigerator Panels
GET YOUR OFFICIAL KitchenAid PARTS TO ENSURE VICTORY
Popular KitchenAid Refrigerator Panels
Used to cover up the compressor components.
Used to cover up the compressor components.
Installation Instructions
Mario from Rockledge, FL
Water on the floor, fridge leak
Back cover was wet in the area of the inlet valve(sign). Water on the floor. 90% of the time is a leaking inlet valve. But it could be frozen water on the drain pan- so I exposed the radiator fins and drain pan and looked. No ice so I went to the valve and opened the copper line valve and waited a few minutes- as soon as water was ca
... Read more
lled by the. Ice maker it leaked. So I went ahead and replaced the valve and after I made sure no leaks were visible I replaced the back cover and continued to observe and all was good. I treated the fridge as a new installation, changed filter and dumped the next two ice buckets. Then I proceeded to demand brownie points.
Read less
Hold the filter securely in place with this refrigerator water filter housing. It connects the cartridge to the water lines, creating a sealed path for water to pass through the filter before reaching the dispenser and ice maker. Cracks, worn seals, or damaged internal valves may cause leaks near the filter or reduce water flow. Replacing a faulty housing helps restore a secure connection and steady water delivery. Unplug the refrigerator and shut off the water supply before disconnecting tubing or removing the housing. This is an OEM part sourced directly from the manufacturer.
Hold the filter securely in place with this refrigerator water filter housing. It connects the cartridge to the water lines, creating a sealed path for water to pass through the filter before reaching the dispenser and ice maker. Cracks, worn seals, or damaged internal valves may cause leaks near the filter or reduce water flow. Replacing a faulty housing helps restore a secure connection and steady water delivery. Unplug the refrigerator and shut off the water supply before disconnecting tubing or removing the housing. This is an OEM part sourced directly from the manufacturer.
Water leaks or reduced ice production can indicate a problem with the refrigerator’s water filter housing. It holds the water filter in the filtration system. The water filter is not included, so confirm compatibility with your refrigerator’s model number. This is an OEM part.
Before the documented repair, unplug the refrigerator and shut off the household water supply. Remove the water filter and upper cover panel, then disconnect the LED wire harness. The repair specifies a 1/4-inch nut driver.
Water leaks or reduced ice production can indicate a problem with the refrigerator’s water filter housing. It holds the water filter in the filtration system. The water filter is not included, so confirm compatibility with your refrigerator’s model number. This is an OEM part.
Before the documented repair, unplug the refrigerator and shut off the household water supply. Remove the water filter and upper cover panel, then disconnect the LED wire harness. The repair specifies a 1/4-inch nut driver.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
The water filter housing holds the filter and connects the water lines, so a leak may point to damage here. Confirm this OEM refrigerator part fits by checking your appliance’s model number. Unplug the refrigerator before replacing it. Remove the water filter, then the reservoir access panel screws using a 1/4-inch socket or nut driver.
The water filter housing holds the filter and connects the water lines, so a leak may point to damage here. Confirm this OEM refrigerator part fits by checking your appliance’s model number. Unplug the refrigerator before replacing it. Remove the water filter, then the reservoir access panel screws using a 1/4-inch socket or nut driver.
Filtered water flow in your refrigerator is supported by this OEM housing assembly. It includes an integrated filter heater, sealing gaskets, water ports, and a wiring harness. Check your refrigerator’s model number to confirm fit.
Filtered water flow in your refrigerator is supported by this OEM housing assembly. It includes an integrated filter heater, sealing gaskets, water ports, and a wiring harness. Check your refrigerator’s model number to confirm fit.
This access panel provides a removable cover that protects internal components while allowing service access when needed. Designed for a proper fit and clean appearance, it replaces cracked, bent, or missing panels.
This access panel provides a removable cover that protects internal components while allowing service access when needed. Designed for a proper fit and clean appearance, it replaces cracked, bent, or missing panels.
