Electrolux Refrigerator Drawers and Glides
Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular Electrolux Refrigerator Drawers and Glides
Crisper Cover Support - Front
PartSelect Number PS2358880
Manufacturer Part Number 241993101This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Peter from Amherst, NY
Support studs were brokenUsed pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. Read more...
Refrigerator Crisper Pan
PartSelect Number PS429854
Manufacturer Part Number 240337103This manufacturer-certified Refrigerator Crisper Pan is a clear plastic pan which easily inserts into your fridge's crisper area in order to hold items. In some models of refrigerator this model is the same pan for both the meat and vegetable bins, but please note that this part is sold individually and not part of a complete kit. If broken then the part should be replaced. Refer to your user manual and model number to see if this crisper is right for your fridge. This bin measures approximately 11 inches deep and 22 inches long.
Fixes these symptoms
- Door won’t open or close
- See more...
Melody from Hammond, IN
pan-crisper broke / drawer support rail brokepan-crisper pan was easy because is just slide in. the drawer support rail just took a screwdriver to unscrew the screw and replace it with new rail and put the screw back in. The thing I like the best is the fast service of the parts to me. Read more...
Crisper Glass Shelf Insert
PartSelect Number PS429963
Manufacturer Part Number 240350608Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.
shun from madison, WI
broken pieces, thought would have to replace refrigerator.Former tenants had broken glass bin cover and door shelf retainer. Online parts catalog was easy to use, pictures accurate, correct parts received promptly, fit is perfect. Price was couple bucks less than others. Thanks for saving us the cost of a new frig. Read more...
Refrigerator Crisper Drawer
PartSelect Number PS2361214
Manufacturer Part Number 240351061This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity control slide, and this component is now sold separately. The crisper drawer is designed to store produce at a humidity level that ensures your food is kept fresh for as long as possible. It is commonly replaced because it is cracked, warped, or stained. For this simple tool-free repair, start by opening your refrigerator door and sliding out the old crisper drawer. Take your new crisper drawer and align the thin ridge on the top of the drawer with the track located inside the refrigerator. Slide the new part into place and your repair is complete.
John from JASPER, TX
Broken plastic guides on both crisper drawer covers. Upper crisper pan broken. Broken supports.Remove both crisper pans and covers. Discard old frames and re-use glasses. Use two screw drivers to gently pry out broken supports. Top broken off smooth on one support. Unable to grasp with pliers to pull out. I drilled a small hole in the center of the large expansion pin. I screwed in a small sheet metal screw. Used side cutter pliers to grasp screw and gently rock back and forth to remove center of large pin. Plucked out broken pieces with needle nosed pliers. Gently tap in expansion pins to install new supports. The rest is simple re-assembly using new parts. "Nothing to it but to do it." Read more...
Meat Drawer Rail - Right Side
PartSelect Number PS430126
Manufacturer Part Number 240356501As you look into the fridge, this drawer support track is located on the right-hand side. This item is white in color and made of plastic. The drawer support track can wear out over time. The only tool required is a Phillips screwdriver. Empty out the drawer and remove it by sliding it forward. Lift out the shelf, remove the screw on the side of the shelf, remove the rail by pushing the rail forward and snapping out of place, insert new rail, and install the screw back in. Now the shelf can be put back into the refrigerator. The mounting screws are sold separately.
Jonathan from Universal City, TX
Water actuator brokeIf you think you probably can't do this, you're like me... but you just had to try because you needed the part anyway right? This really was quite simple, a lot easier than it sounds from the description and saved me probably $75 I'd have had to pay a tech to do it. Just unplug fridge, yank that water spill tray out, yes yank, it's a bit hard to do that if you've not done it before. After that remove the 3 phillips head screws you just gained access to. Lift panel frame up then out. Disconnect wire harness plug and set that frame aside. Take out next screws exposed to free the unit. Tilt unit out and remove the two little screws and shims holding actuator in place. Remove broken one. Put new one in. Reverse all actions taken thus far. Plug fridge back in and have a drink of water like nothing ever happened. : ) You can do this! Read more...
Crisper Drawer Cover - NO Glass
PartSelect Number PS2361213
Manufacturer Part Number 240350903This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
Fred from Plano, TX
had broken sheves on the doors and the crisper drawers weren't suportedThe only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily. Read more...
Meat Drawer Rail - Left Side
PartSelect Number PS430245
Manufacturer Part Number 240365401This drawer rail supports the left hand side of the sliding drawer. The mounting screws are sold separately.
Kathleen from Golden, CO
Support rails holding meat tray drawer broke.I removed the drawer from the support rails and placed it aside. I then removed the entire shelf that the rails were attached to. Each rail contained one (1) screw. I removed the screw, slid the support rails back approximately a 1/4 inch and they popped out. I replaced with the new rails, sliding them into place in reverse of how I removed the damaged ones & attached with the screw. I cleaned the shelf off and placed it back in the refrigerator, and placed the meat drawer onto the new rails. It actually took longer to clean the shelf than perform the repair. Read more...
Upper Crisper Drawer Frame
PartSelect Number PS899475
Manufacturer Part Number 240599301Frame ONLY. Glass must be ordered separately.
Chuck from PHILADELPHIA, PA
The top crisper drawer frame was cracked, it secures the glass top also.Replaced the top crisper drawer frame. Installation was very easy. The hardest part was cleaning all of the spilled food/liquid items from under the drawers once removed to replace the top frame. I will keep the top frame and repair it. From what I have read, this is a very common problem as there is no support in the middle of the frame...it is only plastic. Read more...
Refrigerator Lower Crisper Drawer
PartSelect Number PS2361217
Manufacturer Part Number 240351240
Carol from Taos, NM
Over the years both the meat drawer and the lower crisper drawers were unfortunately left open when the frog door was shut. This of course made huge cracks and some shattered pieces.It took me longer to make sure I was ordering correctly than to fix. When the box arrived, I simply unwrapped it, removed the items, washed them and put them into my 15 year old refrigerator. Perfect fit! I am very pleased. Read more...
PartSelect Number PS429919
Manufacturer Part Number 240343803This crisper drawer is used in refrigerators to store fruit, vegetables, meat, and other food items at a certain temperature and humidity level. This keeps the food in the drawer fresh. There are individual controls that you can use to control the temperatures inside the drawer, depending on what you store in it. This feature makes the crisper drawer easy to organize when storing food. Remember to unplug your appliance from the power source before starting this installtion. Refer to the manual provided by the manufacturer for installation instructions.
Catherine from Pasadena, CA
broken crisper drawer and framethe parts were exactly right and fit perfectly. they came quickly and arrived in great shape. I simply removed the broken pieces and replaced them with the new plastic frame to hold the crisper pans and the new pan. Read more...