My Orders
Electrolux Refrigerator Valves
GET YOUR OFFICIAL Electrolux PARTS TO ENSURE VICTORY
Popular Electrolux Refrigerator Valves
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when activated, and send it through to your water dispenser or ice maker in your refrigerator. The water inlet valve is located at the back of the refrigerator, and connects to the water supply. The valve can break from material fatigue or normal use. If your water inlet valve is malfunctioning, you could be getting a lack of water to the inside of your refrigerator. Your ice maker may not produce cubes or your water dispenser may not work. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. This valve measures approximately 7 inches long and 4.5 inches wide, and is constructed of plastic and metal. It comes in blue, and includes the valve and mounting bracket.
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when activated, and send it through to your water dispenser or ice maker in your refrigerator. The water inlet valve is located at the back of the refrigerator, and connects to the water supply. The valve can break from material fatigue or normal use. If your water inlet valve is malfunctioning, you could be getting a lack of water to the inside of your refrigerator. Your ice maker may not produce cubes or your water dispenser may not work. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. This valve measures approximately 7 inches long and 4.5 inches wide, and is constructed of plastic and metal. It comes in blue, and includes the valve and mounting bracket.
What this part fixes:
- Ice maker dispenses too little ice
- Ice maker not making ice
- Ice maker won’t dispense ice
Installation Instructions
Jose from Alexandria, VA
water leaking out of refrigerator
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more
valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Read less
If you notice that the ice maker in your refrigerator is leaking or is not making or dispensing ice, you may need to replace the water inlet valve. When energized, the water inlet valve releases water from the supply line into the ice mold. The water inlet valve is in the back of your refrigerator so you will need to pull the fridge out from the wall before completing this repair. To complete this job, you will need a 1/2 inch wrench, a 1/4 inch nut driver and a utility knife. If your old inlet valve has a screw-in fitting, you may need to simply cut the end of the hose to fit in the new part. Be sure to disconnect both the water and power supply from the refrigerator prior to beginning this repair.
If you notice that the ice maker in your refrigerator is leaking or is not making or dispensing ice, you may need to replace the water inlet valve. When energized, the water inlet valve releases water from the supply line into the ice mold. The water inlet valve is in the back of your refrigerator so you will need to pull the fridge out from the wall before completing this repair. To complete this job, you will need a 1/2 inch wrench, a 1/4 inch nut driver and a utility knife. If your old inlet valve has a screw-in fitting, you may need to simply cut the end of the hose to fit in the new part. Be sure to disconnect both the water and power supply from the refrigerator prior to beginning this repair.
Installation Instructions
Orville from Garland, TX
Was not filling the ice tray full.
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Th
... Read more
anks for your Interest. God bless.
Read less
The water inlet valve supplies water to the refrigerator ice maker and water dispenser.
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & Electrolux.
Possible Repair Solution For:
Leaking water, water will not dispense, ice maker does not make ice, ice maker does not dispense ice.
This is an authentic water inlet valve (4 coil), which works with refrigerators.
The water inlet valve supplies water to the refrigerator ice maker and water dispenser.
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & Electrolux.
Possible Repair Solution For:
Leaking water, water will not dispense, ice maker does not make ice, ice maker does not dispense ice.
This is an authentic water inlet valve (4 coil), which works with refrigerators.
Installation Instructions
Neville from LITHONIA, GA
Not making ice in both ice maker or dispensing water
To confirm my diagnosis I first replace the filter still no water flow.
Check water supply from the wall valve: ok
Remove the entire inlet valve assembly and sit it over a small bucket.
Disconnect the tubing from the bottom of the 1st selenide valve: this is the one leading to the filter.
Place cup under water dispense ... Read more r and activate dispenser. No water discharge from inlet valve confirm valve is bad.
Install the new valve matching the colored tubing with the color on each inlet valve.
Re-connect the water supply place container under water dispenser and activate: There will be a large gush of air then water. Dispense aprox 1 gallon of water to confirm all the air is purged from the system. Your refrigerator is now back to dispensing water and making ice.
Good luck everyone - Neville
Check water supply from the wall valve: ok
Remove the entire inlet valve assembly and sit it over a small bucket.
Disconnect the tubing from the bottom of the 1st selenide valve: this is the one leading to the filter.
Place cup under water dispense ... Read more r and activate dispenser. No water discharge from inlet valve confirm valve is bad.
Install the new valve matching the colored tubing with the color on each inlet valve.
Re-connect the water supply place container under water dispenser and activate: There will be a large gush of air then water. Dispense aprox 1 gallon of water to confirm all the air is purged from the system. Your refrigerator is now back to dispensing water and making ice.
Good luck everyone - Neville
Read less
Introducing the genuine Valve, Water, Single Solenoid from the trusty brand, Frigidaire. This high-quality, original Equipment Manufacturer (OEM) part is designed precisely for the compatibility with specific Frigidaire, Electrolux, White Westinghouse, and Tappan models. This Water Valve with a Single Solenoid ensures optimal performance ensuring your appliance works at its best. Please validate your model is compatible with this part prior to purchase, as products may appear similar but have minor variations in size and shape. Don't compromise the functionality of your appliances. Trust this Frigidaire Single Solenoid Water Valve for the utmost efficiency.
Introducing the genuine Valve, Water, Single Solenoid from the trusty brand, Frigidaire. This high-quality, original Equipment Manufacturer (OEM) part is designed precisely for the compatibility with specific Frigidaire, Electrolux, White Westinghouse, and Tappan models. This Water Valve with a Single Solenoid ensures optimal performance ensuring your appliance works at its best. Please validate your model is compatible with this part prior to purchase, as products may appear similar but have minor variations in size and shape. Don't compromise the functionality of your appliances. Trust this Frigidaire Single Solenoid Water Valve for the utmost efficiency.
This replacement valve is designed to regulate the controlled flow of fluids or gas within an appliance system. It plays an important role in safe and reliable operation and is commonly replaced when leaks, restricted flow, or functional failures occur. Appliance fitment should be verified prior to installation.
This replacement valve is designed to regulate the controlled flow of fluids or gas within an appliance system. It plays an important role in safe and reliable operation and is commonly replaced when leaks, restricted flow, or functional failures occur. Appliance fitment should be verified prior to installation.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
