My Orders
Electrolux Refrigerator Compressors
GET YOUR OFFICIAL Electrolux PARTS TO ENSURE VICTORY
Popular Electrolux Refrigerator Compressors
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.
Installation Instructions
Reynaldo from SAN BRUNO, CA
there is electrical surge from Pacific Gas and electric.
There is PG and E employee working in one of the electrical post that cause the electric surging,there is a 3 big bang then we smell burning wire.it blew and burned the compressor relay,so what i did is figure it out, all 2 refregirator fan is running the heater is working,but its not cooling, when I touch the compressor there is no vibra
... Read more
tion,so all i did is removed the compressor relay, and I found out that the wire is burned and melted the connector, i order the relay from parts select and install it.1.remove the capacitor and install it to the new relay. 2.put a new connecrtor from the wire.3. install the compressor relay.easy as 1,2,3.
Read less
This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.
This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.
The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.
The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.
This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.
This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.
This heat exchanger, also known as a suction or capillary tube, is an essential component of your refrigerator or freezer’s sealed system. It transfers heat from inside the appliance to the outside environment, helping maintain a consistent temperature for optimal food preservation. By carrying refrigerant between the condenser and evaporator, it ensures efficient cooling performance. A properly functioning heat exchanger improves energy efficiency and supports a longer appliance lifespan.
This heat exchanger, also known as a suction or capillary tube, is an essential component of your refrigerator or freezer’s sealed system. It transfers heat from inside the appliance to the outside environment, helping maintain a consistent temperature for optimal food preservation. By carrying refrigerant between the condenser and evaporator, it ensures efficient cooling performance. A properly functioning heat exchanger improves energy efficiency and supports a longer appliance lifespan.
Installation Instructions
Mike from Jacksonville, FL
Copper lines leaking freon
Removed the inside evaporator coil to do inside solder job, use torch to heat solder joints on the outside drier in order to remove it and install new drier. Soldered Heat exchanger line to drier and 1/4” copper line to compressor. Wrapped with new insulation wrap. Pulled a vacuum on system and then charged with 4.4 ounces of 134a freon.
... Read more
Works like a champ again!
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers.
Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet.
Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device.
Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029.
Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.
Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers.
Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet.
Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device.
Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029.
Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.
What this part fixes:
- Freezer section too warm
- Fridge and Freezer are too warm
- Fridge too warm
Installation Instructions
MARK from LIBERTY LAKE, WA
Rear of upper shelf would freeze, while the rest of the freezer was dripping wet
We opened our freezer last week only to find the bottom 2/3 was barely cold, while only the rear of the upper shelf was cold. In fact, it was covered in frost, despite being a frost-free model. Our frozen veggies were slushy, not rock hard, and our frozen juices were all liquid. We defrosted the freezer, plugged it back in, but immediat
... Read more
ely noticed that we didn't hear the 'whhoooooosh' that you typically hear when you close the freezer door. After 30 minutes, the rear upper shelf was frosty again, but the rest was still at room temp. We figured the freezer was a goner, so we started looking at new freezers. I headed online to see if I could fix it, and I eventually found this site. I had learned online that these symptoms can be caused by either a bad capacitor, or a bad controller (which the capacitor plugs in to). I guess you can't necessarily tell which of the two parts is defective, so I chose to order/replace both of them. I ordered the correct parts from partselect.com, and they alerted me that Frigidaire has a new replacement part for the capacitor. When the parts arrived (quickly, ftw!), I unplugged the freezer and snipped the two wires leading to the controller. Next I unplugged the controller from the compressor housing. I spliced the replacement controller's wires into the freezer's wires (using my own wire nuts...as none were included with my order :( ). I snapped the new controller onto the compressor mounting, and then plugged the capacitor in. I plugged the freezer back in, and it was time for the moment of truth. The interior light of the freezer came on, and I could hear the compressor 'humming'. I could hear it humming before the repair, so the big test was to see if it got cold. I was nervous because the freezer DIDN'T make the 'whoooshing' noise right away, but after just an hour, the 'test' mug of water was already turning into ice. It was fixed!!!! If you have these symptoms, you CAN do this!!! Unplug the freezer. Cut two wires. Unplug the controller. Splice two wires. Plug in the new controller. Snap in the new capacitor. DONE!!!
Read less
This refrigerator compressor start relay is a critical component that supports the initial startup of the compressor motor by delivering a short burst of electrical power. It also functions as an overload protector, monitoring temperature and shutting off the motor if overheating occurs. Designed for select refrigerators, this part ensures reliable cooling performance and protects the compressor from damage. Installation involves attaching the relay to the compressor’s terminal pins and securing it in place—no special tools required. Replacing a faulty relay can resolve issues such as the refrigerator not cooling or the compressor failing to start.
This refrigerator compressor start relay is a critical component that supports the initial startup of the compressor motor by delivering a short burst of electrical power. It also functions as an overload protector, monitoring temperature and shutting off the motor if overheating occurs. Designed for select refrigerators, this part ensures reliable cooling performance and protects the compressor from damage. Installation involves attaching the relay to the compressor’s terminal pins and securing it in place—no special tools required. Replacing a faulty relay can resolve issues such as the refrigerator not cooling or the compressor failing to start.
This start device assists the motor during start-up by supplying an initial electrical boost. Proper function ensures reliable starting. Replacing a faulty start device helps resolve start-up or cooling issues.
This start device assists the motor during start-up by supplying an initial electrical boost. Proper function ensures reliable starting. Replacing a faulty start device helps resolve start-up or cooling issues.
Installation Instructions
QUENTIN from WELDON, CA
NOT COOLING
First download schematic from frigidaire.com and watch a few youtube videos on fixing refrigerators .At first my guess was the timer was stuck on the defrost mode .However after studying the schematic I checked to see if the power was being sent to the compressor through the starter ptc .The 110 v was there after pulling off the conne
... Read more
ctor .Also the condenser fan was on confirming this . however the compressor was stone cold .the compressor has 3 inputs whose resistances across all seemed good (see youtube videos) so it was probably the ptc starter or the 15microfarad capacitor .I changed the capacitor first -not the problem .then the ptc starter .immediatey the compressor started warming and after a few minutes cold air was being blown in .Very satisfying !
Read less
This refrigerator compressor is a key component in the cooling system, responsible for compressing and circulating refrigerant gas throughout the appliance. It increases the pressure and temperature of the gas before sending it through the condenser coils, where heat is released and the gas condenses into a liquid. The refrigerant then travels to the evaporator, where it expands and evaporates, creating a cooling effect that is distributed throughout the refrigerator. A malfunctioning compressor can lead to poor cooling performance or complete system failure. Proper lubrication and cooling are essential for maintaining its efficiency and extending the life of your appliance.
This refrigerator compressor is a key component in the cooling system, responsible for compressing and circulating refrigerant gas throughout the appliance. It increases the pressure and temperature of the gas before sending it through the condenser coils, where heat is released and the gas condenses into a liquid. The refrigerant then travels to the evaporator, where it expands and evaporates, creating a cooling effect that is distributed throughout the refrigerator. A malfunctioning compressor can lead to poor cooling performance or complete system failure. Proper lubrication and cooling are essential for maintaining its efficiency and extending the life of your appliance.
Engineered to deliver efficient heat absorption, this genuine OEM evaporator coil assembly serves as the core cooling component within your refrigerator. As refrigerant circulates through the coil, it draws heat from the interior compartments, helping maintain consistent temperatures for proper food preservation. Built for reliable thermal performance and durability, it is an ideal replacement for a worn or leaking coil, helping restore effective cooling, reduce frost buildup, and support dependable day-to-day operation.
Engineered to deliver efficient heat absorption, this genuine OEM evaporator coil assembly serves as the core cooling component within your refrigerator. As refrigerant circulates through the coil, it draws heat from the interior compartments, helping maintain consistent temperatures for proper food preservation. Built for reliable thermal performance and durability, it is an ideal replacement for a worn or leaking coil, helping restore effective cooling, reduce frost buildup, and support dependable day-to-day operation.