Electrolux Refrigerator Trays and Shelves

Electrolux Appliance Parts
Shop By Part Type

Popular Electrolux Refrigerator Trays and Shelves

Your Price
$32.16
  In Stock
Refrigerator Door Shelf Bin
★★★★★
★★★★★
(166)
PartSelect Number PS429871
Manufacturer Part Number 240338001
This manufacturer-approved Refrigerator Door Shelf Bin is made of white plastic and is easy to install. It is used to hold heavier items in the fridge, and you'll be able to visually see if the part is broken. This particular shelf attaches to the fridge door and is designed for the UPPER shelf. You can check if this model is right for your appliance by checking your user manual and model number. This model is just over 26" wide, just over 4" tall and just over 7" deep - front to back. This is a simple repair that requires only that you snap the old part out of place and snap the new one into place.
Fixes these symptoms
Installation Instructions
Connie from Franklin, IN
grandkids had broken the top and middle shelf bins in my refrigerator door
I simply snapped the proper pieces in place. It was sooo easy! Read more...
Your Price
$31.83
  In Stock
Refrigerator Door Shelf Bin
★★★★★
★★★★★
(113)
PartSelect Number PS429873
Manufacturer Part Number 240338101
This retainer bar (Refrigerator Door Shelf Bin, Refrigerator Door Shelf, Door Shelf Bin, Refrigerator Door Bin) holds items on the refrigerator door shelf. The plastic retainer can become brittle with time and crack or break under the strain of normal use. It can also break if heavy items are placed in the door shelf. If this part will no longer hold securely onto the inner door panel it will need to be replaced. This model is white plastic, and measures 26 by 5 inches. Sold individually.
Fixes these symptoms
Installation Instructions
Jane from Owosso, MI
broken refrigerator door shelves
snapped right on and removed screws, insert and replace screws. Read more...
Your Price
$74.02
  In Stock
Crisper Glass Shelf Insert
★★★★★
★★★★★
(45)
PartSelect Number PS429963
Manufacturer Part Number 240350608
Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.
Installation Instructions
shun from madison, WI
broken pieces, thought would have to replace refrigerator.
Former tenants had broken glass bin cover and door shelf retainer. Online parts catalog was easy to use, pictures accurate, correct parts received promptly, fit is perfect. Price was couple bucks less than others. Thanks for saving us the cost of a new frig. Read more...
Your Price
$9.88
  In Stock
Crisper Support - Rear
★★★★★
★★★★★
(16)
PartSelect Number PS2358879
Manufacturer Part Number 241993001
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your user manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.
Fixes these symptoms
Installation Instructions
Peter from Amherst, NY
Support studs were broken
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. Read more...
Your Price
$50.77
  In Stock
Crisper Drawer Cover - NO Glass
★★★★★
★★★★★
(18)
PartSelect Number PS2361213
Manufacturer Part Number 240350903
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
Fixes these symptoms
Installation Instructions
Fred from Plano, TX
had broken sheves on the doors and the crisper drawers weren't suported
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily. Read more...
Your Price
$58.48
  In Stock
Meat Pan Cover Frame - Glass NOT Included
★★★★★
★★★★★
(20)
PartSelect Number PS2378645
Manufacturer Part Number 240599803
Glass insert must be ordered separately.
Installation Instructions
William from FOREST HILL, LA
Meat Pan Cover Broke
Popped out glass, pulled up and the front of cover and pulled froward. Pushed new cover back on to studs and pushed down on cover to lock it to front studs. Put glass on top of new cover. About 3 min total to make repair. Read more...
Your Price
$98.75
  In Stock
Refrigerator Shelf (Spill Safe) - White
★★★★★
★★★★★
(10)
PartSelect Number PS2581463
Manufacturer Part Number 240358926
Installation Instructions
BRADLEY from DANVILLE, CA
Main shelf cracked, meat/cheese drawer fell out of broken glide track.
Simple. Re-installed in minutes. Read more...
Your Price
$97.66
  In Stock
Pan Cover Glass Insert
★★★★★
★★★★★
(19)
PartSelect Number PS429964
Manufacturer Part Number 240350609
This the just the glass. The frame is NOT included.
Installation Instructions
Stacia from Salem, OH
Shattered crisper pan glass
I slid the new glass in place Read more...
Your Price
$95.86
  In Stock
Upper Crisper Drawer Frame
★★★★★
★★★★★
(7)
PartSelect Number PS899475
Manufacturer Part Number 240599301
Frame ONLY. Glass must be ordered separately.
Installation Instructions
Chuck from PHILADELPHIA, PA
The top crisper drawer frame was cracked, it secures the glass top also.
Replaced the top crisper drawer frame. Installation was very easy. The hardest part was cleaning all of the spilled food/liquid items from under the drawers once removed to replace the top frame. I will keep the top frame and repair it. From what I have read, this is a very common problem as there is no support in the middle of the frame...it is only plastic. Read more...
Your Price
$51.46
  In Stock
Crisper Glass Insert
★★★★★
★★★★★
(8)
PartSelect Number PS645378
Manufacturer Part Number 240350649
This is a replacement crisper glass insert for your refrigerator. It fits into the crisper pan frame and acts as the top of the crisper pan, as well as a shelf for food storage. Because it is made of glass, the insert can occasionally become cracked or broken, and in this case, it will need to be replaced. To replace the insert, simply slide the old insert out and replace it with the new one. The glass insert measures approximately 17.12" X 15.40", and is sold individually. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
ROBERT from DOYLESTOWN, PA
Glass Shelf Broken
Simply slid glass into frame & it fit perfectly. Read more...

Related Parts