( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Oven Burner Igniter

★★★★★
★★★★★
11 Reviews
$ 148.74   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS4241428
Manufacturer Part Number DG94-00520A
Manufactured by Samsung
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light
This part works with the following products:
Range, Microwave Oven Combo.
This part works with the following products:
Samsung.
Part# DG94-00520A replaces these:
AP5577941, 114491
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

13 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Moke
November 23, 2019
My oven takes forever to reach temp, sometimes it sits at 150 for 20 mins. I can see the igniter glowing and can smell propane.
For model number fx710bgs
Hello Moke and thanks for writing. This is usually a defective ignitor, you can try to clean it and see if that helps. If it does not chances are it has become defective and needs to be changed. We hope this helps. Please contact us anytime.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Elton
March 11, 2018
My broiler works but the oven does not. The error code is eo8. Can you help?
For model number FX710BGS
Hello Elton, Thanks for your question. E08 means the oven is not heating. You will want to unplug the range and test the oven sensor, broil burner, bake burner, and convection heater. Replace any that do not have electrical continuity. I hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Annette
March 27, 2018
Hi my broil to toast veggies works but oven to bake won't heat and no fire. I was thinking the igniter it just stays black when i turn on oven to back. No glow but when i turn oven on i dont get an erroe code just a solid dot buy the 350° that i don't remember being there before. And no i dont mean the ° degree dot its a •before the digits. Please can u help?? thank u annette
For model number NX58H5600SS
Hi Annette, Thank you for your question. Yes, the first part that I would suggest you test is your igniter to make sure that it is working correctly. If it is, you may want to test your temperature sensor next. If that part is fine it may actually be your electronic control board that is the issue. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
February 21, 2020
Hi, my oven does not light, i'am testing the igniter for amp's. What should it draw
For model number nx58k9500wg/aa
Hi Michael, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Andrew
February 25, 2019
Oven won't light burners fine. I don't see igniter glow. Any ideas
For model number Nx58f5500ssaa
Hello Andrew, Thank you for contacting us. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Janis
April 24, 2018
The preheating in oven never reaches the desired baking temperature. No error code was given. All the top burners work. The broiler works. The fan runs. Just no heat for baking. What could be the cause?
For model number nx58h9500ws
Hi Janis, Thank you for the question. I suggest replacing or testing the thermister sensor, PartSelect Number: PS4240743.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Austin
November 22, 2018
Dual oven, upper oven works with the divider in. Broil also works, lower oven does not ignite, manually with a lighter or otherwise. When prompted to preheat the ignitor does not glow either. Suggestions? specs for testing?
For model number NX58J7750SS
Hi Austin, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Norm
February 13, 2020
Heat is coming out but digital temp. Moves up very slowly. Never getting to the desired pre-heat temp.According to dashboard.
For model number FX510BGS
Hi Norm, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multi-meter. When testing the sensor with a multi-meter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If this checks out fine, you will need to check the electronic control board, both oven elements and the wiring between these parts to see which once is causing the issue. We hope this helps. Thank you and have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Aleks
March 12, 2018
The error code is se
For model number nx58f5500ss/aa
Hello Aleks, thank you for your question. The SE code on you range is in reference to a Defective key on the control panel. I would suggest replacing the control panel part number DG34-00025A. I hope this helps!

Was this helpful?
Thank you for voting!
Jason
November 28, 2018
My oven is very slow to reach the preheat temperature, if it reaches it at all. I had the oven igniter replaced a year and a half ago when this occurred. Could it be the same thing? How can i tell if it needs to be replaced?
For model number NX58H5650WS
Hello Jason, Thank you for the question. I suggest testing the Sensor, PartSelect Number PS4240743. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 3 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Oven not heating and holding temp
    The Samsung stove I have has had the igniter replaced several times. It seems to wear out over a couple years time. I did the repair with a Philips #2 screw driver. Open the oven door, remove the grates. unscrew the bottom cover and expose the heat shield. Unscrew the heat shield. This exposes the burner. Unscrew the burner from the center of the plate/lower heat shield. Unscrew the burner from the front and back of the oven. Carefully lift up the burner to expose the igniter and clip. Unscrew the igniter from the burner and set the burner aside. Unclip the igniter from the power cable. If it falls below, it won't go far just reach in a lift it back up to fasten the new igniter to the power clip. Refasten to the burner with new clips and screws provided. Re-insert the burner to the gas jet that is below the bottom plate which will not be visible to you unless you place your head towards the rear of the stove and look down. Once the Jet is back into the hole of the burner, re fasten it to the middle back and front of the stove. Replace the covers and grates. Close the oven and test it. A new igniter does wonders. You can remove the stove door for a less intrusive install, but I found it unnecessary to do so and saved a step and time. I was done well under 30 minutes.
    • John from EAST QUOGUE, NY
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Oven igniter burned out needed to replace
    With a screwdriver
    Other Parts Used:
    Knob
    • Grace from BETHEL, CT
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Oven wouldn't light
    1) Remove oven door
    2) Remove oven floor with Phillips screwdriver.
    3) Remove igniter with screwdriver and wrench
    4) Remove bottom burner
    5) Install new igniter to burner
    6) Replace burner
    7) Replace oven floor
    8) Replace oven door
    9) Test
    • Timothy from WASHINGTON, DC
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    1 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      11 Reviews
      4.7
      Filter By Rating:
      • 5 Stars
        9
      • 4 Stars
        1
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS4241428
      Manufacturer Part Number: DG94-00520A
      Brand
      Model Number
      Description
      Samsung
      FX510BGS
      Range - GAS RANGE
      Samsung
      FX510BGS/XAA-0000
      Range
      Samsung
      FX510BGSXAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model FX510BGSXAA Parts
      Samsung
      FX710BGS
      Range - GAS RANGE
      Samsung
      FX710BGS/XAA-0000
      Range
      Samsung
      FX710BGSXAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model FX710BGSXAA Parts
      Samsung
      NX583G0VBBB
      Range - GAS RANGE
      Samsung
      NX583G0VBBBAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX583G0VBBBAA Parts
      Samsung
      NX583G0VBSR
      Range - GAS RANGE
      Samsung
      NX583G0VBSRAC
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX583G0VBSRAC Parts
      Samsung
      NX583G0VBWW
      Range - GAS RANGE
      Samsung
      NX583G0VBWWAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX583G0VBWWAA Parts
      Samsung
      NX58F5300SS
      Range - GAS RANGE
      Samsung
      NX58F5500SB
      Range - GAS RANGE
      Samsung
      NX58F5500SBAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX58F5500SBAA Parts
      Samsung
      NX58F5500SS
      Range - GAS RANGE
      Samsung
      NX58F5500SSAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX58F5500SSAA Parts
      Samsung
      NX58F5500SW
      Range - GAS RANGE
      Samsung
      NX58F5500SWAA
      Microwave Oven Combo - Samsung Oven/Microwave Combo Model NX58F5500SWAA Parts
      Samsung
      NX58F5700WS
      Range - RANGE
      Samsung
      NX58H5600SS
      Range - GAS RANGE
      Samsung
      NX58H5650WS
      Range - GAS RANGE
      Samsung
      NX58H9500WS
      Range - GAS RANGE
      Samsung
      NX58H9950WS
      Range - GAS RANGE
      Samsung
      NX58J5600SG
      Range - GAS RANGE
      Samsung
      NX58J7750SG
      Range - GAS RANGE
      Samsung
      NX58J7750SS
      Range - GAS RANGE
      Samsung
      NX58K3310SB
      Range - GAS RANGE
      Samsung
      NX58K3310SS
      Range - GAS RANGE
      Samsung
      NX58K3310SW
      Range - GAS RANGE

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service