Models > FX510BGS

FX510BGS (XAA-0002) Samsung Range - Overview

Sections of the FX510BGS

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Range Oven Temperature Sensor – Part Number: DG32-00002B
Range Oven Temperature Sensor
★★★★★
★★★★★
(5)
PartSelect #: PS4240743
Manufacturer #: DG32-00002B
$86.21
  In Stock
Oven Burner Igniter – Part Number: DG94-00520A
Oven Burner Igniter
★★★★★
★★★★★
(11)
PartSelect #: PS4241428
Manufacturer #: DG94-00520A
$151.02
  In Stock
Range Surface Burner Knob – Part Number: DG64-00472A
Range Surface Burner Knob
★★★★★
★★★★★
(6)
PartSelect #: PS10058981
Manufacturer #: DG64-00472A
The surface burner knob lets you control the heat of the surface burner on the range.
$50.92
  In Stock
Right Rear Burner Cap - Black – Part Number: DG62-00111A
Right Rear Burner Cap - Black
★★★★★
★★★★★
(2)
PartSelect #: PS5576950
Manufacturer #: DG62-00111A
$54.12
  In Stock
BURNER-HEAD(AUX);NX583G0 – Part Number: DG62-00076B
BURNER-HEAD(AUX);NX583G0
★★★★★
★★★★★
(1)
PartSelect #: PS5576948
Manufacturer #: DG62-00076B
$55.81
  In Stock
Bottom Floor Panel – Part Number: DG61-00570A
Bottom Floor Panel
★★★★★
★★★★★
(8)
PartSelect #: PS4240944
Manufacturer #: DG61-00570A
$149.61
  In Stock
Range Surface Burner Cap – Part Number: DG62-00067A
Range Surface Burner Cap
PartSelect #: PS4240971
Manufacturer #: DG62-00067A
The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
$62.02
  In Stock
BURNER-HEAD;NX583G0VBSR, – Part Number: DG62-00075B
BURNER-HEAD;NX583G0VBSR,
PartSelect #: PS5576947
Manufacturer #: DG62-00075B
$34.58
  In Stock
Hexagon Nut Cap – Part Number: 6021-001211
Hexagon Nut Cap
PartSelect #: PS4133540
Manufacturer #: 6021-001211
Left hand thread.
$9.14
  In Stock
FAN-CONVECTION MAIN;FSE1 – Part Number: DG67-00018A
FAN-CONVECTION MAIN;FSE1
PartSelect #: PS4241128
Manufacturer #: DG67-00018A
$17.63
  In Stock
Range Oven Door Switch – Part Number: DG34-00006A
Range Oven Door Switch
★★★★★
★★★★★
(1)
PartSelect #: PS4240750
Manufacturer #: DG34-00006A
The oven door switch shuts the oven light off when you close the oven door.
$44.22
  In Stock

Questions And Answers for FX510BGS

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Charlie
    January 20, 2022
    I have an error code 08. What should i do?
    For model number FX510BGS
    Hi Charlie, Thank you for your question. The E-08 error code indicates that the oven is not heating. Reset the range by turning the circuit breaker off for a few minutes and then turn it back on. If the error returns, you will need to check the voltage on the electrical outlet that the range is plugged into. The outlet the range is plugged into should be a 240 volt outlet. If the outlet does not have 240 volts power, you will need to contact an electrician to inspect the outlet. If the outlet is working correctly, there may be a loose wire on the outlet cord on the terminal block that you will need to fix. If there is no loose wire, and the oven is not heating, you will need to check the temperature sensor, the igniter, the electronic control board and the wiring between the parts to see which one is causing the issue. We hope this helps! If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the FX510BGS

      [Viewing 2 of 2]
      Little to no heat when baking
      Fixed by
      these parts
      Show All
      Gas igniter glows, but will not light
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Oven not heating and holding temp
      The Samsung stove I have has had the igniter replaced several times. It seems to wear out over a couple years time. I did the repair with a Philips #2 screw driver. Open the oven door, remove the grates. unscrew the bottom cover and expose the heat shield. Unscrew the heat shield. This exposes the burner. Unscrew the burner from the center of the plate/lower heat shield. Unscrew the burner from the front and back of the oven. Carefully lift up the burner to expose the igniter and clip. Unscrew the igniter from the burner and set the burner aside. Unclip the igniter from the power cable. If it falls below, it won't go far just reach in a lift it back up to fasten the new igniter to the power clip. Refasten to the burner with new clips and screws provided. Re-insert the burner to the gas jet that is below the bottom plate which will not be visible to you unless you place your head towards the rear of the stove and look down. Once the Jet is back into the hole of the burner, re fasten it to the middle back and front of the stove. Replace the covers and grates. Close the oven and test it. A new igniter does wonders. You can remove the stove door for a less intrusive install, but I found it unnecessary to do so and saved a step and time. I was done well under 30 minutes.
      Parts Used:
      Oven Burner Igniter
      • John from EAST QUOGUE, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      REPLACED THE FLOOR CAVITY
      REMOVED THE TWO SCREWS AND THEN THE FLOOR PIECE. THEN REPLACED THE NEW FLOOR CAVITY AND SCREWED THE NEW ONE IN PLACE.
      Parts Used:
      Bottom Floor Panel
      • Madeleine from CHICAGO, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven wouldn't light
      1) Remove oven door
      2) Remove oven floor with Phillips screwdriver.
      3) Remove igniter with screwdriver and wrench
      4) Remove bottom burner
      5) Install new igniter to burner
      6) Replace burner
      7) Replace oven floor
      8) Replace oven door
      9) Test
      Parts Used:
      Oven Burner Igniter
      • Timothy from WASHINGTON, DC
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers, Wrench (Adjustable)
      1 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!