Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Barry M - April 3, 2018
Verified Purchase
it was supposed to fit perfectly job done thank you
The part was here showed up when it was supposed to fit perfectly job done thank you
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No spark at any of the 4 stovetop burners.
UNPLUG THE POWER CORD! This particular model is a (slide-in) unit, it was wedged between to fixed cupboards/cabinets. Therefore, there are really no side panels to speak of, this made the repair slightly easier. I simply slid the unit out enough to unplug the power cord and access the right side of the uni
... Read moret. All one needs, at this point, is a Phillips head screw driver to remove a small metal panel installed just below the stove top panel (right side of range), its held with approx. 8 screws. There is one other panel that must be removed as well, (you may want to remove this panel first). It is an enameled-like panel approx. 5" wide x 36" long located at the front of the range (right side) running the length/height of the range (held with 2 screws). Get those 2 panels removed and you will see the spark module attached near center of range just under stove-top panel. Module is attached to a small metal bracket, module has 6 wires attached to it (2 feeding the module and 4 exiting the module to the burners). Bracket screws are nearly impossible to get at (you need a very stubby Phillips screw driver, if you can even get your hand in there). Anyway, I simply released the module from the bracket, then carefully bent the bracket back toward me; to provide work area for my hands. The bracket bends easily and really can't be broken. Now, at this point (using longer needle-nose pliers) detach the wires from the old module (remembering each wires location) or, as I did, hold the replacement module near the existing module and transfer the wires one at a time. Now, slap it all back together as you took it apart. Really simple job, total time is easily/generally under 30 minutes. It may be easier to access the module by removing all the burner components and raising the stove-top? Not sure? I chose not to do the repair that way. Hard part was locating where the manufacturer hid the module on the range. :- ) D.I.Y.ers Rock!!!
Read less
Ronald from Berkeley, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Intermittent but rare spark when I went to start the rage: spark module definitely was toast or on its way out
The trickiest part was locating the elusive spark module. I am not certain I took the best route, but not considering all the wrong routes in trial and error, it was the most expedient. Certainly there must have been a single something to remove to get to this frequently faulted part..
Anyhow, thanks to the great part, the st
... Read moreove works really well again.
Read less
Bronius from College Station, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark at top burners
Shut off gas supply Pulled stove away from wall removed spark ignigtor box . Installed new one . No problem. Good for another 10 years
Joseph from East Freetown, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas range would not light
Replaced spark module but same problem persisted. Realized that the insulation on the spark ignitors were all cracked, causing a short.
Lesson learned: check the condition of the spark ignitors first as these have a tendency to crack. Even the smallest crack will cause a short.
Ordered new spark ignitors and plan t
... Read moreo complete repair.
Read less
Mike from Menlo Park, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
16 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
range burner igniter not functioning
Removed grill and set aside, then removed burner with a 1/4 counter clock twist. Removed ground wire and igniter wire from burner. Set to side in order taken off. Remove the two screws on the panel that is on the back of the unit and slide it up and set it aside. Removed screws from side decorative panels each side (one top and one bottom
... Read more) and slide panel toward the rear to remove from notch slot. Then removed the two screws on each side and back to remove top of range. On the side there are two screws together towards the rear, the one towards the front of the range need to be removed. Then removed four screws that held the pan under the range top that were screwed into the gas line supports. Then removed the two screws from rear that held the pan in place. Remove the pan and set aside. Lift the right gas line burner support up. Remove ground bottom, hot wires upper and igniter wires from spark module. Pop module out and replace with new one. Reverse process to complete repair. Cause that the wires do not get under the pan when reinstalling same
Read less
Patrick from Greeneville, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminal spade wrong size on range wiring to fit module
cut off terminals and replaced with the right size one's stove lights every time now wlrowe
wilber from oshkosh, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one. Exact fit nomproblems.
scott from centreville, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
48 of 72 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
March 4, 2018
I think my spark module is bad. Can a homeowner replace this easily?
For model number jds9860gg
Hi Brian, Thank you for the question. Yes, most homeowners have replaced the Spark Module on their own. You will need to turn off the gas supply to the appliance and remove it from the power source. Remove the small panel on right side of stove,then unclip module and swap the wires from old module to new module one at a time or take pictures so you know what wire goes to what terminal. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Peter
July 30, 2018
Many times, the top burners do not light. There's no clicking noise either. If i wait a while they work. Note - this happens to all burners at once. Any help would be appreciated.
For model number mgs5870adb
Hello Peter, Thank you for the question. This sounds like it might be an issue with the Spark Module, PartSelect Number PS2094592.This part sends enough current to the igniter to create a spark to the bottom of the burner cap. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Terri
March 6, 2018
Our top burners and oven work fine, but broiler will not light. The igniter does not glow and broiler control turns itself off after a minute or so. We removed the igniter and tested it with a multimeter, and it reached 165. What could be our problem? We are on propane. Thanks.
For model number JGR8855BDS
Hi Terri, Thank you for the question. If the broil is not igniting make sure that there is 120 vac getting to the igniter. If there is and the igniter is not glowing then the igniter is bad. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Henry
October 9, 2019
I have a Jenn-Air model number as above and none of the top burners will light any more. I suspect the spark module, but I was wondering if this problem could be caused by other parts.
For model number JDS9860ACW
Hi Henry,
Thank you for your question. If none of the surface burners are lighting, The issue is likely the spark module, but you will also need to check the igniter switches and the top burner igniters. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Ruth
October 9, 2019
Only one burner sparks now, what is not working correctly?
For model number JDS9860AAB
Hi Ruth, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Ronald
June 28, 2022
Our cook top has one burner that will not light. We just replaced the igniter and it still will not spark. The clinking sound is still working and we smell gas, but the burner does not spark. From other comments it sounds like the part we need is the spark module; however, it appears from your parts department it is no longer available for our model. Would another part from a different model work on ours, or are we just out of luck? Suggestions?
For model number JGD8345ADB
Hello Ronald, thank you for your question. It's possible that the gas feed is clogged. We do have a Spark Module Spark Module PS2094592 that is compatible. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Floyd
January 26, 2023
I have a Maytag cooktop with five burners the small burner in the back work the other four don't. I changed the spark module and checked each ignitor separately. I ran the wire from the one small burner that worked to each ignitor and they sparked. When I turn on one of the four burner that don't work I get a clicking sound from the back small burner. What could be the problem?
For model number MGC5536BDS
Hello Floyd, Thank you for the question. We suggest testing the Igniter Switch Assembly with Leads and check the continuity with a Multimeter. The switches are located in the controls behind the knobs. We hope this helps!
All burners igniter does not, have replaced the spark module and all the burner igniters and did not fix the problem
For model number jds9860aap
Hi John, thank you for reaching out. Since you have replaced the parts which are the most likely to cause the issue, we would recommend checking the power supply to ensure the range is connected properly to the supply. If this does not help, then you may need to check the terminal block, part number PS11750972, to fix the issue. We hope this solves your problem!
Gas stove top not sparking when one control knob is turned on. The other three control knobs cause a spark on all burners when activated.
For model number JDS9860BDS
Hi Barry, thank you for reaching out. Based on the description that you have provided, we would recommend checking the igniter switch and harness, part number PS2088876, as it is most likely faulty and may need to be replaced. We hope this helps!
My stove is making a constant clicking sound (looks like from all 4 igniters). When I turn on Burner #1, the clicking sound goes away but the other 3 burners continue to click. I've been unplugging my stove and only plugging it in when I need to cook something... What could the issue be? Spark Ignition Switch? Spark Module? Thank you!
For model number Maytag MGR 4451BDW
Hi Tim, thank you for your question! The first and most likely culprit is a clogged ignition system. Food scraps and even grease can sometimes wedge themselves into these systems and cause the stove to continuously click. Clean your ignition system. Take the burner cap off and scrub around the igniter. Unclog the fuel ports. Clean any grease or gunk off with rubbing alcohol. Replace the burner cap, reconnect your stove, and see if the clicking stops. If this does not help, we would recommend replacing the ignition switch and harness assembly, part number PS11749701. Good luck with your repair!
