Models > 31203KAW

31203KAW Magic Chef Range - Overview

Sections of the 31203KAW

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter Kit – Part Number: 12400035
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(49)
PartSelect #: PS1573892
Manufacturer #: 12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both ...
$52.15
  In Stock
Top Burner Igniter – Part Number: 74004053
Top Burner Igniter
★★★★★
★★★★★
(19)
PartSelect #: PS2082000
Manufacturer #: 74004053
This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, eleme...
$39.92
  In Stock
Leveling Leg – Part Number: WP74002557
Leveling Leg
★★★★★
★★★★★
(5)
PartSelect #: PS11744009
Manufacturer #: WP74002557
This is a leveling leg for your oven, range, or stove. The leveling legs on your oven allow your appliance to sit perfectly flat. The new one may be longer in length than your original, but will work...
$10.76
  In Stock
Burner Head Cap with Spark Electrode – Part Number: WP3412D024-09
Burner Head Cap with Spark Electrode
★★★★★
★★★★★
(16)
PartSelect #: PS11741732
Manufacturer #: WP3412D024-09
The burner head cap with spark electrode directs the gas to the front and back burner heads and will equally distribute the gas across cooking areas. This part can help the following symptoms: if your...
$63.05
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$19.99
  In Stock
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(20)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
This is a replacement oven rack and it is designed for use with ranges and ovens. This is a genuine OEM replacement part. The rack provides a level and stable surface for cookware inside of your appli...
$76.85
  In Stock
Screw - 10-16 x 1 – Part Number: WP3387230
Screw - 10-16 x 1
★★★★★
★★★★★
(2)
PartSelect #: PS11741409
Manufacturer #: WP3387230
This screw is sold individually.
$7.76
  In Stock
Screw – Part Number: WPW10348409
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS11753384
Manufacturer #: WPW10348409
Sold individually.
$7.76
  In Stock
Door Seal – Part Number: WP7212P043-60
Door Seal
★★★★★
★★★★★
(5)
PartSelect #: PS11743947
Manufacturer #: WP7212P043-60
This door seal is used for ranges and ovens. The seal prevents hot air escaping from the oven to maintain a certain temperature when baking. The clips sticking out of the seal help secure it to the ra...
$56.86
  In Stock
Surface Burner Knob – Part Number: WP74002353
Surface Burner Knob
★★★★★
★★★★★
(2)
PartSelect #: PS11743999
Manufacturer #: WP74002353
This is a surface burner knob for the stovetop on your range. it is 2 inches in diameter and only accepts a D-shaped shaft. The part snaps into place on the shaft of your unit and rotates to the diffe...
$22.99
  In Stock
Spark Module - Surface Burners – Part Number: 12001596
Spark Module - Surface Burners
★★★★★
★★★★★
(10)
PartSelect #: PS2003170
Manufacturer #: 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$60.64
  In Stock
Burner Grate – Part Number: WP2003X030-00
Burner Grate
PartSelect #: PS11738737
Manufacturer #: WP2003X030-00
This square burner grate has sides measuring almost nine inches long. It is all black in color. Sold individually.
$89.05
  In Stock

Questions And Answers for 31203KAW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Paul
    July 1, 2021
    I have a Magic Chef gas range model 31203kaw and i do not have instruction manual And tenant left without instructing me how to use it. How do i light top burners and oven?
    For model number 31203KAW
    Hi Paul, Thank you for your question. According to your owner's manual, first, place the pan on the burner grate. Then push in and turn the knob to the LITE position. A clicking sound will be heard and the burner will light. When one burner is on, all will ignite. After the burner lights, turn the knob to the desired flame size. The ignitors will continue to spark until the knob is turned from the LITE position. Note, if the flame should go out during a cooking operation, turn the burner off. If gas has accumulated and there is a strong gas odor, open the windows and wait 5 minutes for the gas odor to disappear before relighting the burner. We hope this helps! Good luck with the repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!

      Common Symptoms of the 31203KAW

      [Viewing 8 of 8]
      Gas igniter glows, but will not light
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Little to no heat when baking
      Fixed by
      these parts
      Show All
      Element will not heat
      Fixed by
      these parts
      Show All
      Oven not heating evenly
      Fixed by
      these parts
      Show All
      Gas smell
      Fixed by
      these parts
      Show All
      Little to no heat when broiling
      Fixed by
      these parts
      Show All
      Oven is too hot
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Oven would not work but the Broiler did
      The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don't rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.
      Parts Used:
      Flat Style Oven Igniter Kit
      • James from Ferndale, MI
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers, Socket set
      332 of 362 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      gas burner ignitor failure
      Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
      Parts Used:
      Top Burner Igniter
      • roy from East Providence, RI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      137 of 152 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven would'nt light
      In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The new igniter took only 45 minutes to install and supply's 3.6 A/C volts to the gas valve and the oven works fine.
      Parts Used:
      Flat Style Oven Igniter Kit
      • Charles from Charlestown, RI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      128 of 139 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!