Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is a water inlet valve; an electrically controlled solenoid valve that opens and closes when necessary, to control the flow of water into your washing machine during the washing cycle. This part features two different valves, one for cold and one for warm water. If your washer is having difficulty filling up properly or is not filling up at all, the inlet valves may be bad and not opening to allow water in, meaning the valve needs replacing. Replacing water inlet valves will require some disassembly of your washing machine, so a screwdriver, socket wrench, and other tools will be necessary. This water inlet valve is sold individually, and does not come with any other parts or accessories.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Larry B - December 5, 2020
Verified Purchase
This was easiest home repair I have done.
The part fit perfect and arrived in two days. We use are washing machine almost every day so it was important to receive the part fast.
★★★★★
★★★★★
Vicki D - November 10, 2021
Verified Purchase
Easy installation/repair.
Ordering was easy. Delivery was as stated.
★★★★★
★★★★★
Helen M - January 29, 2023
Verified Purchase
Easy repair. Worked as promised. Yeah!! Back in business.
Shipping was slow, but worth the wait.
★★★★★
★★★★★
Daniel S - March 11, 2021
Verified Purchase
Very Easy level 1
The item arrived safely packed in plastic and paper stuffing. No damage to part and was about a 15 minute install. There is an odd shaped nut that I couldn't find the size for so I used a nut driver tool. I want to thank this website and the company for the easy selection based on model number and for sending the correct part. You are a life saver! Will definitely call on your help again in the future!
★★★★★
★★★★★
Sarah H - April 15, 2020
Verified Purchase
Worked great
The part was delivered early which is always a bonus. Part was easy to find and was received in perfect condition. Pretty easy to install and washer works great again. Thanks!
★★★★★
★★★★★
Michael L - April 27, 2023
Verified Purchase
Great part
Exactly what I needed and a good quality product
★★★★★
★★★★★
Robert H - April 17, 2021
Verified Purchase
Great part fix our problem
Awesome
★★★★★
★★★★★
John E - May 23, 2024
Verified Purchase
It worked!
We had problems with the delivery but it was a result of the weather and not PartSelect.
East fix and everything is working.
★★★★★
★★★★★
Lisa M - April 11, 2022
Verified Purchase
Part fit perfect, easy assembly
The past fit perfectly. Works great now
★★★★★
★★★★★
James W - June 13, 2022
Verified Purchase
Easy repair
Part came quickly. Works great
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 11 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Solenoid valves on water inlet assembly leaking by the valve seats.
1. Unplug washer. 2. Turn off water and disconnect hoses. 3. Remove control panel and set aside. It's held in place by 2 screws on the back. 4. Remove 2 screws to remove water inlet valve assembly. 5. Replace in reverse order.
Joseph from GRANBURY, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
hot water side of valve was leaking into tub
Locked garage door. Removed hoses after shutting off water. Removed 4 10mm bolts and removed old valve and replaced. Reverse the process. Total time about 5 minutes. Drank beer and then declared to wife after 30 minutes that the problem was solved.
Dale from CONROE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dripping after washing was done
Watch a YouTube video on how to fix it. Video was really easy to follow
Kevin from MANCHESTER, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Threads on an inlet valve deteriorated; couldn't tighten the hot hose.
Unplug the cord and shut off hot and cold water faucets.
headache avoidance: The male threads of the inlet valve are plastic. Gently turn the female hose ends onto them at the kitchen table with the eventual position in mind then tighten.
1. Remove 4 screws holding shiny metal backplate w/ 1/4" socket (easy) 2.
... Read morePry tabs loose, top of plate (easy). 3. Pull electric leads from 2 solenoids (easy). 4. Remove 2 long screws holding upper painted structure (easy). 5. Remove 2 screws holding valve in place (easy). 6. Tilt and slide the valve loose and pull it out (easy). 7. Replace valve and reverse steps 6-1.
n.b. no inside water tubes; water drips straight into tub
Also, an hour should be enough. I spent more time than needed guessing, dealing with a few issues, opening the machine again, starting over, etc.
ps. I guessed at the age.
Read less
Craig from TOLEDO, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dripping into tub when washer was off
Removed the top assembly where the controls are located by removing the two mounting screws, one on each side. Removed the two hoses. Removed the two mounting screws, Removed old part, installed new part in reverse order.
Michael from ELBERTA, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet would not stop running after filling
Two screws to take off rear panel. Slid control panel board back to unlock and laid forward. Exposed two more screws holding in water inlet. Removed and slid old water inlet out, new water inlet in. Attached two screws, control panel and rear panel and works perfectly. So much easier than I imagined!
Michael from D HANIS, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water coming into machine .
Disconnect water lines. Remove top control panel. Remove 2 screws & disconnect wires & replace old for new
Unplugged the washer, turned off water supply to washer, using channel lock pliers disconnected hoses to valve assembly, using nut driver removed two screws on back of console, pulled console away from top exposing valve, disconnected wire harness from valve assembly, using nut driver removed two screws holding valve assembly in place, r
... Read moreemoved defective valve assembly, transferred foam spacer from defective valve assembly to new valve assembly and installed new valve in opposite order of removal.
Read less
James from NEW BERN, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Some how the renters broke where the water lines connect to the washer
Unplug machine Move machine out from wall Removed 4 screws on back plate Removed the 2 screws holding the assembly to washer Pulled old unit out and reversed process to put back together
But when I went to test it would not drain tipped washer up and removed hose from motor and found a sock inside Re
... Read moremove sock and washer runs great.
Just a note this website was very helpful in finding the right part with the exploded view of parts
Thank you
Read less
Chris from SAINT CLOUD, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Johnny
December 14, 2019
Does this part cause a constant drip when not in use? That's what my washer is doing.
For model number Gtw330ask3ww
Hello Johnny,
Thank you for your question. Yes, if the water valve assembly is defective it can cause some leaking from your washer. We hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Vern
December 26, 2022
Are water froze up when unfrozen the water on washer machine keeps running will not stop even when you unplugged it
For model number Grw220ack6ww
Hello Vern, thank you for contacting us. The issue is most probably related to a faulty water inlet valve, part number PS12726768. It controls the water flow to the washer and it is supposed to stop water flow to the washer when the water is not required. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Donald
February 12, 2020
Only fill to the lowest level despite level setting
For model number HTW200ASK1WW
Hello and thank you for writing.
It certainly sounds like it could be a faulty water inlet valve PS12726768 and/or possibly a malfunctioning door lock PS12343280 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Water spits out a couple of times during fill and stops , nothing else, no water. Looked up a video and it says that it is possibly the Water Inlet Valve?
For model number GTW335ASN2WW
Hello Joshua, thank you for contacting us. A washer that spits water and then stops filling is commonly caused by restricted water flow, likely due to clogged inlet screens on the water valve. Clean the water inlet valve screens. If this does not help, you will need to replace the water inlet valve, part number PS12726768, to fix the issue. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
TERRI
September 23, 2021
Only fills to lower level
For model number GTW335ASN1WW
Hello Terri, Thank you for the question. We suggest checking the Water Pressure Hose that leads from the tub tot he Pressure Switch. Make sure there is no suds build up preventing water to pass through. If the Hose is clear, you may have a defective Pressure Switch. The Switch for this model is part of the Control Board, so the Board will need to be replaced. We hope this helps!
Does this part(AP6891106) cause the water to start filling and then stop, causing a clicking sound?
For model number GTW330ASK3WW
Hello Mark, thank you for asking! The water inlet valve controls the cold and warm water supply to the washer. If it is defective, issues related to filling the washer are likely to occur. Besides the water inlet valve, the clicking sound can happen when something gets stuck between the tub and the drum. We hope this sorts out your problem.
Was this helpful?
Thank you for voting!
Elizabeth
December 29, 2022
after power outage and water been shut off due to a frozen pipe. my washing machine will not fill completely for larger loads. it's like it's stuck on small load. I have checked waterline screens and cleaned, I have checked the airline seems to be clear and clean. I've looked for pressure switch but not sure it's different from my other washers. I need help to find pressure switch or to tell me what else to look for. model: GTW335ASN1WW Serial: RR968657G
For model number GTW335ASN1WW
Hello Elizabeth, thank you for contacting us. According to our research the issue is most probably related to a faulty control board, part number PS16743401. It manages the washer's functions such as filling, washing, draining, and spinning. It is the most susceptible part to damage because of power outages. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
My washer is just filling with water like the water doesn't stop even when needed or unplugged I have to shut the water off completely for it to stop also my washer doesn't sound like it's spinning correctly it sounds like it's having trouble. Could I please get some advice
For model number HTW240ASK5WS
Hello Kirsten, thank you for contacting us. The most probable culprits of the issue are a faulty water inlet valve, part number PS12726768, and the control board, part number PS16743401. The valve is responsible for providing the right amount of water at right time and the board manages the washer's functions such as filling, washing, draining, and spinning. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
I'm looking for the water inlet valve for thos washing machine. GTW330ASK3WW
will this fit? Thank you
For model number GTW330ASK3WW
Hi Blaine,
Thank you for your question. The part number listed under your model number for the water inlet valve is PS12726768. You may order it online or by calling customer service. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Tarium
February 8, 2023
Cold water will not fill
For model number Gtw220ack4ww
Hello Tarium, thank you for contacting us. The issue is probably related to a faulty water inlet valve, part number PS12726768. Please test it with a multimeter to pinpoint the fault. If this does not help, the UI control board, part number PS16743401, is probably defective. We hope this sorts out your problem!
