Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pressing the start, microwave will start and dies out. Electric is tripping.
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of t
... Read morehe work is easy.
Read less
ARNEL from WAUKEGAN, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave tripped circuit breaker when turned on
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Arthur from LUTZ, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
26 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
September 2, 2019
Is this by chance the switch needed for the top and bottom of the three?
For model number CGMV176NTF
Hello Gary, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12071303. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sam
July 15, 2023
I need the middle switch on the door. It is staying closed when door is closed, tripping breaker. Do you call this the monitoring switch? Can you give me the part number please. Thank you in advance.
For model number Fgmv175qfa
Hi Sam, Thank you for asking. The Middle Switch for this model is PartSelect Number PS12071302. We hope this helps!
I’m having fuses blow when the door is not tight or is open before the microwave shuts off. From what I’m reading, the door switches need to be replaced. Can you please confirm if the following part numbers and quantities are correct if I am going to replace all the switches?
I understand there are 3 switches-
Top and Bottom are part number PS12071303
Middle is part number PS12071302.
Thank you!
For model number FGMV175QFA
Hi Ken, thank you for the question. According to our research, the door switches you have mentioned are the correct part numbers, and the quantity is correct as well. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dale
February 11, 2024
The microwave starts running as soon as I open the door
For model number JVM1790SK01
Hello Dale, thank you for your inquiry. According to our understanding, the issue is most probably with the monitor interlock switch, part number PS11766871. It monitors the door latch position and communicates to the electronic control board whether the latch is open or closed. You may need to replace it to fix the issue. Glad to be of assistance!
Microwave light inside stays on and the start button won’t work. I think it’s not recognizing the door is shut. Everything else works the fan lights etc!
For model number FGMV17WNVF
Hello Tracy, Thank you for the question. We suggest testing the Three Door Switches with a Multimeter. The top and bottom switch should read normally closed and the middle is normally open. We hope this helps!
Hi, my fuse on the microwave would blow whenever I shut the oven door. I went online to troubleshoot and it indicated the centre door switch should be replaced. I’ve removed the switch and the part number on the switch is 40T105 5E4. Please advise as to what number would be the correct replacement part. Regards, Bruce
For model number CGMV175QFA
Hello Bruce, thank you for contacting us. We have found that the mentioned part is compatible with your model. Your model contains two door switches. The second switch is the door switch, part number PS12071302. We hope this helps!
Are all three switches the same? My middle switch is bad and needs replacing.
For model number FMGV175QFA
Hi Toby, thank you for reaching out. Based on our research, all three switches are not the same. The part you are looking for is the door switch, part number PS12071302. We hope this helps!
