CNTRL-ELEC W10740217

Hello Dan, thank you for writing. We have researched the model you have provided and have found the part you are looking for is the Chute Assembly Number PS11738680. We hope to hear from you soon.

Hello Hattie, thank you for contacting us. Based on our research, we are providing you with the instructions that will assist you in replacing the dispenser control board. 1- Use the heat gun to heat the touchpad to break the glue. 2- Use a putty knife to start peeling from one of the corners. 3- Pull out the drip tray by using both hands. 4- Remove the screws at the bottom of the dispenser cover. 5- Insert the flat-blade screwdriver into the side and pry all the cover off and lift it away. 6- Disconnect the wire plug from the board. 7- Replace the touchpad and board on the dispenser cover. We hope this helps!