This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This is a center crisper rail for your refrigerator. This part acts as a support rail for the crisper drawer by holding the center of the crisper frame. You will need to replace this part is if your c...
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is an OEM front cover for the pantry door of various refrigerator models. This cover is designed as a door that can cover the pantry compartment within your refrigerator and provide a transparent...
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed...
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators.
T...
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely throu...
Glass and centre support is NOT included. Must be ordered separately. This frame along with the glass provides the crisper drawer for fresh storage of vegetables
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
$11.09
In Stock
Questions And Answers for MFI2269VEM3
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Herman
October 14, 2021
How do I remove the ice maker?
For model number MFI2269VEM3
Hello Herman, Thank you for the question. Here is a link to a How to Video on replacing the Ice makers. We hope this helps!
Was this helpful?
Thank you for voting!
Lee
August 26, 2023
My control panel has gone blank. Nothing lights up. If I press any button, they ALL LIGHT UP and display 8888. How do i fix this.
For model number MFI2269VEM3
Hello Lee, thank you for the question. According to our research, the issue is with your refrigerator display board. You may need to replace the dispenser control board, part number PS10060177, to fix the issue. Glad to be of assistance!
Hello Margo, thank you for contacting us. According to our research, the freezer temperatures should be set at 0ºF (-18ºC) to conserve the quality of your frozen food. We hope this information helps!
Was this helpful?
Thank you for voting!
Chris
November 14, 2021
The lighted control panel is black and light inside fridge is out. How can I fix? Thank you?
For model number MFI2269VEM3
Hello Chris, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Manufacturer Part Number 67006294. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
Was this helpful?
Thank you for voting!
James
March 27, 2023
After replacing circuit board it blinks. Peoooo
For model number MFI2269VEM3
Hi James, thank you for your question. If you recently replaced the control board on the refrigerator, the display shows PE0000 because the unit is in programming mode. To program the newly installed control board, follow these instructions:
1. Press and hold the Door Alarm Keypad.
2. Press and hold Freezer Temperature DOWN Keypad within 3 seconds.
3. Release the Door Alarm Keypad and wait 3 seconds.
4. The control will display PE to indicate the programming mode.
5. Entry is confirmed by pressing the Freezer Temperature DOWN Keypad once more.
6. The control will display the current program code. This value should be validated with the program code printed on the unit serial plate. If the program code is correct, the programming mode is exited by pressing Door Alarm Keypad for 3 seconds.
7. Press the Refrigerator Temperature UP Keypad or Refrigerator Temperature DOWN Keypad to change the digit value with each key press.
8. The decimal point indicates the selected digit. Press the Freezer Temperature UP Keypad to select the next digit.
9. Once the desired program code is entered, press and hold the Freezer Temperature DOWN Keypad until the Program CODE begins flashing indicating it has been saved.
Once the program code has been saved the programming mode is exited by pressing any key. The programming mode can be exited at any time by pressing the door alarm key for 3 seconds or will exit if unattended for four minutes. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le
... Read moret's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!