This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.38
In Stock
Order within the next 4 hrs and your part ships today!
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$33.94
In Stock
Order within the next 4 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Order within the next 4 hrs and your part ships today!
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
$97.17
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for MVWC465HW3
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
January 5, 2024
My washer will not start running water, just sounds like it’s trying to drain. It just started this. Cannot was any clothes at this point.
For model number MVWC465HW3
Hello James, thank you for getting in touch. We have concluded that the issue is with the drain pump, part number PS11770076. You may need to replace it to fix the issue. We hope this solves your problem!
Washer fills and only cycles through rinse cycles, but not wash cycles.
For model number MVWC465HW3
Hello Tanya, Thank you for writing, We have researched the model you have provided and have found the part you are looking for is the Electronic Control PartSelect Number PS16221221. Good luck with your repair.
Is this model the same as MVWC465hw,and if so why is there a 3 at the end.
For model number MVWC465HW3
Hello Frances, thank you for your question. Almost all model numbers have a number at the end of the model number. Sometimes the number is not adjacent to the rest of the model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Dell
October 5, 2022
Sand plugs water inlet filter, need replacement filters
For model number MVWC465HW3
Hello Dell, thank you for contacting us. We have researched the model you have provided and have found that the parts you are looking for are part numbers PS1803069 and PS11750500. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Hello Cheri, thank you for reaching out. A washing machine that leaks during the spin cycle means you have a problem with either one of the large drain hoses, the drain pump, or the water inlet valve, part number PS11773194. You need to check all these parts. If the drain pump, part number PS11770076, is leaking water, replace it. Replace the drain hose, part number PS12578897, if it is damaged or leaking. We hope this information is useful!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
