Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
March 4, 2018
Hello,i have already replced the clutch assembly because it was making terrible howling noise. Noise is gone but now it wont spin the tub. When the spin cycle starts, it sounds like it wants to spin but then it makes a high speed rubbing noise. I took the lid lock off of the lid and inserted it into the lid lock switch to see what is going on during the spin cycle. I saw the impeller spins up fast for a few seconds and the tub appears to start spinning due to friction, but then it all stops, 30 seconds later it starts again and does the same thing. The tub never gets spinning under power, just friction.
For model number MVWC555DW1
Hello Frank, thank you for your question. I would recommend checking the ACTUATOR part number W10913953, and GEARCASE part number W10771760. If the unit is not spinning, but working otherwise the issue is probably the actuator part. I hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Patty
January 4, 2019
Hello the other day while i was doing laundry my centennial was getting ready to go to the rinse cycle and agitate when it made this loud noise kind of like metal on metal sound and now will not agitate during the wash or rinse cycles but spins just fine. Conveniently my washer isn't covered by may tags so called 10 year replacement warranty they want me to pay 125.00 for a repair man just to diagnose my machine if i would have known that may tag is no longer american made but now comes from china i think i definitely would have bought a different machine please help me with this problem thanks ever so much
For model number MVWC415EW1
Hello Patty, thank you for your question. We would recommend checking the clutch part number W10721967, and the actuator part number W10913953. It sounds like the clutch broke and now the unit will not go from spin into agitate mode. Both of the above mentioned parts help to agitate the unit. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Carlos
July 9, 2019
How do i test a actuator
For model number wtw5000dw0
Hello Carlos, thank you for your question. Unfortunately, we do not have any information on testing that part. However, if the unit isn't shifting between agitate and spin, if the washer is not washing properly, clothing still soaking wet, will not agitate, burning smell, will not drain, unusual noises, pumps but will not spin the actuator may be faulty. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Roger Nash
January 25, 2018
It does not spin at the end of the wash. It washes and drains.
For model number ATW4676BQ1
Hello Roger, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: shift actuator, lid latch assembly, drive belt, clutch assembly, and the gear case. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Vickie
October 2, 2019
My washer takes a long time to go from sensing to wash to rinse to spin. When it does move to the next cycle it does not agitate or spin it make a noise, stops, tries again 3 times to advance to next cycle still making a noise. Then the noise stops and after about 30 minutes the washer will move to next cycle drain, fill up and then starts the noise again for 3 tries to advance,there is still no agitating or spinning. The lock on the wash is engaged. Please help.
For model number WTW5000DW0
Hello Vickie, thank you for your question. We would recommend checking the clutch part number W10721967, and the actuator part number W10913953. It sounds like the clutch broke and now the unit will not go from spin into agitate mode. Both of the above mentioned parts help to agitate the unit and switch between cycles. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
May 23, 2019
My washer will spin but not agitate. What parts do i need to repair? Series 500 Kenmore
For model number 110.25132411
Hi Tim, thank you for your question. There are a few parts to check when your appliance is not agitating. You should take a look at your driver pulley, and your belt first. If those parts are fine then you may need to look into your actuator being the issue. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rudy
February 5, 2019
My Maytag commercial washer is not washing just sensing mode sometimes rinse and lid don't lock either
For model number Mvwc416fw0
Hello Rudy, Thank you for contacting us. I suggest checking the following parts: PS11727984 Lid Lock Latch Assembly, PS11747978 Drive Belt, and PS10057144 Washer Drive Pulley. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
October 8, 2021
Will the new actuator fit on a washing machine manufactured 6 years ago?
For model number MVWC565FW1
Hello Debbie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX11769864. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Christopher
February 7, 2020
My Whirlpool washer will agitate just fine during a normal wash, but it does nothing at the spin cycle. When i select "drain & spin" only, it will drain and spin just fine. Could it be the actuator? The lid locks and the indicator led shows it locked as well during the spin.
For model number wtw4815ewo
Hi Christopher. It is possible it could be the actuator. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Neil
January 25, 2023
I replaced the shift actuator and washer does
Not do a long fast spin. Agitation is fine,
Pump out is fine, basket wobble seems excessive.
Plastic gears are intact clean and lubed.
I hear a repetitive clicking sound when I
Manually spin the tub……? Wobbling
For model number MVWX655DW1
Hello Neil, Thank you for your inquiry. The clicking sound could indicate an object stuck between the tub and the drum or something stuck in the washer drain. Check beneath the wash plate or the drive hub, and check the drive pulley as well. If the tub is wobbling, it could indicate an issue with one of the suspension rods as well. We hope this helps.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wouldn't spin properly
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
After removal of wash plate bolt. Apply Liquid Wrench oil to wash plate spline shaft. Give time for oil to penetrate. In the time it took to disassemble the motor and gearbox the oil had worked. Give the wash plate a good knock with a rubber mallet several times. After that I was able to wiggle off the wash plate by hand without breaking anything. Be sure to pull straight up on the wash plate, any twisting or torquing will bind the spline and the wash plate wont move. The PartSelect YouTube video was perfect for the other parts of the repair.
Washer won’t go into spin cycle! Tries too but then stops
Replaced the drive belt and shift actuator but that did not fix the problem! So I ordered a transmission and this still did not fix it! I give up! Time to get a new washer!
Agitator would not spin, causing when tried to shift into high speed spin. It would cause tub to go out of balance.
First had to take the top of the agitator off to expose the bolt down at the bottom of the agitator. Take a ratchet with 2 1/2 extensions to get bolt off had problems so I had to use impact gun. pull agitator straight up, was stuck a little bit, but once she giving her a few tugs, it popped off the hub. On top of the hub, there is a keyway. Use a straight screwdriver and tap it out sideways. Then remove six Phillips screws and the hub pulls out. Clean the splines really good before you put new hub in. Slide new hub in put six screws in. Tighten them down evenly. Put new keyway back in slide agitator back onto shaft. Bolt on,tighten down Bolt, put top agitator back on. Replacing shift actuator tilt washer up so you can get to the bottom side take a nut driver. There’s two screws on the shield remove them that exposes the shift actuator on the side of the transmission. Remove the harness there’s a clip you push and pull straight out and there’s two screws I believe they’re Phillips And it pulls straight down put new one up in there put the two screws back in make sure the plastic tab on the shift actuator went into the tab of the transmission replaced the wire harness, push it back in make sure it snaps in put shield back on,the two screws in,and you are ready. Once you have those parts back on, you have to reset the washer instructions in your manual. It tells you how to do it. you have to do this or your washer will not work properly.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael J - December 17, 2022
Verified Purchase
As described as fast delivery
I have yet to install the parts. I have them as a backup as it is usually a part that needs replacing every few years. The parts seem to be as described. Great install videos and fast delivery!
★★★★★
★★★★★
DARRELL M - November 21, 2022
Verified Purchase
worked great
part was identically to original whent right in
★★★★★
★★★★★
David C - October 10, 2022
Verified Purchase
Actuator
I put the actuator in and it works great.
★★★★★
★★★★★
Mary D - September 18, 2022
Verified Purchase
Easy repair
Ordered the part to have on hand. The part arrived much faster than expected. Am happy with the purchase.
★★★★★
★★★★★
Louis V - December 3, 2021
Verified Purchase
Timely arrival, exactly what I needed, easy to install and it is working perfectly.
Timely arrival, exactly what I needed, easy to install and it is working perfectly.
★★★★★
★★★★★
John K - October 16, 2020
Verified Purchase
Worked as it should
Part came in on-time,repair went smoothly, up an running again
★★★★★
★★★★★
Donald Lee G - May 7, 2020
Verified Purchase
Replace was easy than thought. Part was great fit just like factory
The help on percentage of parts as to problem helped a great deal
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
Stay on this site
Go to Canadian site
In Stock
