Parts That Fix Maytag Washer MVWC465HW3 Shaking and Moving
Shaking and Moving is a commonly reported symptom for the MVWC465HW3 Maytag Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MVWC465HW3 Maytag Washer that will fix Shaking and Moving. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This drive hub kit (part number W10528947VP) is for washers. Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included. Unplug the washer before installing this part. Wear work gloves to protect your hands.
This is a genuine suspension rod kit for your washer. Suspension rods are used within the overall structure and support of the washer drum and keep it from shaking excessively during the washing cycle. This kit includes four suspension rods that each measure 26.5 inches long, with hooks on one end. If your washer is shaking significantly more than usual when in operation, the suspension rods are one culprit that if damaged or bad, will need replacing. If only one suspension rod is damaged, it is important to replace all four at the same time because they all wear evenly, and eventually another will break. This is an OEM kit that only includes the four rods and its connecting parts.