GC2223GEKB Maytag Refrigerator - Instructions

Had to push the light switch to get lamp to light up.
Removed power from refrig. and removed old light switch
and replaced with the one I got from Partselect. Turned power back on and was done.

The first step in making any repair is finding the right replacement part. It took me about 5 minutes in the internet to locate the correct part at PartSelect. Another 5 minutes to order the correct part and receive a confirming email. Replacement installation of the defective part was 5 minutes to install the new part and verify that the problem was solved. The under-the-counter lighting worked once again which made my wife happy, which as you know make everybody's life better.
Thanks for the fast shipping.

very easy, with use of screwdriver and 1/4 in nut driver. just remember the way the blades go and get them back the same way. had it fixed in 15 mins.

removed the old part and replaced with new. Part came very quickly....

Removed all parts in ice bucket and replaced end cap and bucket.It was very easy and is working great. Thanks for your help

Remove ice tray from freeze. Removed all screws, replaced wheel. Reassembled unit.

Just popped it out with a screwdriver, pluged in the two wires and popped the new one in. Took 2 minutes.

This is the 3rd time this has happened since we bought our refrigerator. I always buy the replacement from www. Partselect. Com they make it so easy to look up using the pictures. I love it! Thanks, parts select!

I popped out the old switch with a screwdriver pressing down the tab on the bottom and unplugged the terminals. Then I plugged in the new switch and popped back into the socket. Piece of cake!

1. Removed ice maker from frig.
2. Emptied all ice cubes.
3. Let it warm up to room temperature.
4. Removed front cover from bottom up (unsnapped).
5. Removed 4 screws.
6. Removed old helix cap.
7. Installed new helix cap.
8. Reverse of step 5 to step 1 above.

The ice to the door has not worked for the last 2 years. My wife complained about not having crushed ice to drink with. We looked at buying a new refrigerator. I went back online to look for the broken part again (I have looked in the past but never found the part). I stumbled on this website and found the part and it was only $4.00 and change. Only needed 10 minutes and my hands to snap the part in place. I do need a new ice bucket but it works for now and my wife is happy.

Pried out the old switch and installed the new switch.

I removed the ice tray and removed the front plastic cover that simply snapped off. I removed 4 hex screws with 1/4" nut driver. Then pulled the auger forward. This allowed me to slide the end cap into place. I put the auger in place and retightened the 4 hex screws, snapped on the plastic cover it worked fine

remove the tray from the freezer. unsnap the front cover from the bin. remove the four screws holding the metal helix and grinder assembly to the bin. slide the metal helix and grinder assembly out. slide the new end cap onto the end of the helix. (this is the only tricky part and takes some patience. The stub end of the helix has to slide into the hole in the end cap. You can't bend the helix, just work the end cap around until it slides over the helix end stub). Reassemble the grinder and helix to the bin, snap the cover on and slide back into the freezer.

There was three screws to remove to unmout the ice maker, and unplug the wire harness,then two to remove to slip in new stripper. All took about 20 mins.