LG Washer Dryer Combo Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular LG Washer Dryer Combo Parts
Your Price
$36.85
In Stock
LG Washer Dryer Combo Dryer Lint Filter
PartSelect Number PS3531962
Manufacturer Part Number ADQ56656401
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
Fixes these symptoms
- Clothes Still Wrinkled
- Door won’t close
- Marks left on clothes
- See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Read more...
Your Price
$46.34
In Stock
LG Washer Dryer Combo Lint Screen Housing
PartSelect Number PS3534930
Manufacturer Part Number MCK49049101
This dryer lint filter cover is an OEM replacement part designed to protect the lint filter from damage and prevent lint from escaping into the drum and mixing with clothing during the drying cycle. Made of durable gray plastic, it fits securely over the filter and helps maintain proper airflow and filtration. Over time, the cover may wear or become brittle, requiring replacement to preserve dryer performance. This part is sold individually and does not include the filter guide, which the manufacturer recommends replacing at the same time. Always consult your appliance’s model information to confirm compatibility and locate the correct guide part number.
Fixes these symptoms
- Door won’t close
- Marks left on clothes
- See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Read more...
Your Price
$138.79
On Order
LG Washer Dryer Combo Washer Water Inlet Valve
PartSelect Number PS12374721
Manufacturer Part Number AJU75152601
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
Fixes these symptoms
- Leaking
- No hot or cold water
- Water Filling Issues
- See more...
Installation Instructions
Flora from MIAMI, FL
Water continued leaking into washer after the end of cycle through the water inlet valve.
Did the repair Myself. Saved $ 400.00 in the process.
Read more...
Your Price
$36.85
In Stock
LG Washer Dryer Combo Locker Hook
PartSelect Number PS8752721
Manufacturer Part Number MFG63099101
This hook locker, commonly referred to as a door lock strike is specially designed for LG washers. It is a small, metal plate that is attached to the washer door. When the door is closed it engages with the door lock mechanism to keep the door securely shut while the washer is running. If it is damaged, worn down, or corroded, it will be unable to engage with the locking mechanism and prevent your washer from closing or staying shut. You may notice that your washer will not start or stops running mid-cycle. You will need to replace the door strike to fix the washer.
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- See more...
Your Price
$175.97
In Stock
LG Washer Dryer Combo Washer Drain Pump Assembly
PartSelect Number PS11706439
Manufacturer Part Number 5859EA1004P
This drain pump assembly is a genuine replacement part designed for select LG and Kenmore washing machines. It plays a critical role in removing water from the washer tub during the drain cycle, ensuring efficient water evacuation and proper cycle completion. Powered by an 85-watt, 120-volt motor, the pump is typically located near the drain hose at the bottom of the appliance. A failing pump may result in water remaining in the tub, incomplete draining, or unusual grinding or knocking noises during operation. Replacing the pump restores proper drainage and helps prevent water damage or cycle interruptions. Installation should be performed with the washer unplugged and may require basic tools and moderate repair experience.
Fixes these symptoms
- Draining Issues
- Leaking
- Will not drain
- See more...
Installation Instructions
Jesus from El Paso, TX
It did not drain water, cycle stops at rinse+spin.
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable supplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes.
Read more...
Your Price
$21.45
In Stock
LG Washer Dryer Combo Clamp Assembly
https://www.youtube.com/watch?v=xp5sV_1SSKw
Step by step instructions were clear and concise. Easy job. Saved hundreds by not having a repair person come to the house. Read more...
PartSelect Number PS3530864
Manufacturer Part Number ACA56078801
This is an outer seal clamp designed for use within LG washing machines. This clamp tightens and secures the gasket that seals the washer tub from the door. If your gasket is loose fitting and is not damaged or warped, this clamp is likely worn out and in need of replacing. This clamp is an OEM part and is made entirely of metal, with a strong tension spring in the middle. This outer seal clamp is sold individually and will require a set of pliers to replace.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Randy from PETERSBURG, WV
Old smelly boot seal ... 10 years old, bottom drain in boot plugged with dog hair.
Followed instructions in this youtube video: https://www.youtube.com/watch?v=xp5sV_1SSKw
Step by step instructions were clear and concise. Easy job. Saved hundreds by not having a repair person come to the house. Read more...
Your Price
$31.58
In Stock
LG Washer Dryer Combo Filter Guide
PartSelect Number PS3535278
Manufacturer Part Number MEA49050001
This is a replacement lint screen guide for your dryer. The lint screen guide attaches to the front bulkhead and supports the lint screen. If your lint screen will not stay in place, or if you are noticing marks left on your clothes, a broken lint screen guide could be to blame. The lint screen guide is approximately 13 inches wide on its straight edge. It is made of plastic and is sold individually. This is an OEM part, directly from the manufacturer.
Fixes these symptoms
- Door won’t close
- Marks left on clothes
- See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Read more...
Your Price
$161.46
In Stock
LG Washer Dryer Combo Pulsator Assembly
There was a 10MM bolt under the cap on mine that you need to remove. I used an cordless impact driver but you could use a socket wrench as well. Remove the bolt and the agitator comes off. May take a little wiggling or it may come right off.
The teeth on the agitator were wore all the way down and gone on mine so it came off easy and this was the issue I had why it was spinning freely. I took the small flat blade screwdriver and used the edge and corner of the blade to clean the teeth on the shaft where the agitator attaches and wiped it down before installing the new part as there was quite a bit of metal shavings from the damaged part.
I just reversed the order of removal to install the new part. Took about 15 min. I ran a rinse and spin cycle to remove any additional metal shavings and to check to see if it all worked properly. THATS IT! TOO EASY! Read more...
PartSelect Number PS12588963
Manufacturer Part Number AGZ72909711
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. This pulsator comes with a nut and plastic cap attached in its middle, to secure within your washing machine. If the pulsator in your washer is broken, it will need replacing immediately to continue to wash and clean your clothes evenly. The cap that sits in the center of this part is sold separately.
Fixes these symptoms
- Marks left on clothes
- Will not agitate
- See more...
Installation Instructions
Joel from JASPER, MO
Agitator was free spinning
Removed the center cover cap carefully on top of the agitator with a small screw driver. There are 3 (on mine) little slots around the edge of the bottom of the cap where it meets the agitator. Insert the small flat blade screwdriver and gently twist at each one till the cap pops loose and comes off.There was a 10MM bolt under the cap on mine that you need to remove. I used an cordless impact driver but you could use a socket wrench as well. Remove the bolt and the agitator comes off. May take a little wiggling or it may come right off.
The teeth on the agitator were wore all the way down and gone on mine so it came off easy and this was the issue I had why it was spinning freely. I took the small flat blade screwdriver and used the edge and corner of the blade to clean the teeth on the shaft where the agitator attaches and wiped it down before installing the new part as there was quite a bit of metal shavings from the damaged part.
I just reversed the order of removal to install the new part. Took about 15 min. I ran a rinse and spin cycle to remove any additional metal shavings and to check to see if it all worked properly. THATS IT! TOO EASY! Read more...
Your Price
$54.24
Special Order
LG Washer Dryer Combo Shock Absorber Assembly
PartSelect Number PS11707466
Manufacturer Part Number ACV72909503
This friction damper assembly in your washer stabilizes the tub or drum. It absorbs the movements and vibrations during the spin cycle to keep the machine steady and reduce noise. It connects the tub to the cabinet. If the assembly is broken, your washer may be excessively noisy or shaky. This genuine OEM replacement part is sold individually, and separately from the shock absorbers.
Fixes these symptoms
- Shaking and Moving
- Spinning Issues
- See more...
Installation Instructions
Donette from Klamath Falls, OR
Noise and vibration when spinning
Used a video to explain how to do repair. Video showed about 1 1/2 hours, took probably 4 hours at least. Bearings were very difficult to remove and were in very bad shape for a 4 1/2 year old washer. We were very lucky and did not have a spider that needed to be replaced. All and all not to bad of a repair, but without the video we found it would have been a guessing game of how to do the repair. Parts all worked well and the washer is now quiet as a mouse in the spin mode. Spending $200.00 instead of a new washer was the goal and it was completed. Here's hoping to more than 4 additional years before another repair is required.
Read more...
Your Price
$47.40
In Stock
LG Washer Dryer Combo Pulsator Cap
PartSelect Number PS3525704
Manufacturer Part Number 5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Fixes these symptoms
- Marks left on clothes
- Will not agitate
- See more...
Installation Instructions
Kristen from Safford, AZ
Washer pulsator was coming loose during wash cycle.
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with.
Read more...
LG Washer Dryer Combo Appliance Types
Related LG Washer Dryer Combo Parts
- LG Washer Dryer Combo Filters
- LG Washer Dryer Combo Pumps
- LG Washer Dryer Combo Valves
- LG Washer Dryer Combo Seals and Gaskets
- LG Washer Dryer Combo Latchs
- LG Washer Dryer Combo Hoses and Tubes
- LG Washer Dryer Combo Hardware
- LG Washer Dryer Combo Caps and Lids
- LG Washer Dryer Combo Springs and Shock Absorbers
- LG Washer Dryer Combo Sensors
- LG Washer Dryer Combo Switches
- LG Washer Dryer Combo Hinges
- LG Washer Dryer Combo Ducts and Vents
- LG Washer Dryer Combo Dispensers
- LG Washer Dryer Combo Circuit Boards and Touch Pads
- LG Washer Dryer Combo Motors
- LG Washer Dryer Combo Elements and Burners
- LG Washer Dryer Combo Drums and Tubs
- LG Washer Dryer Combo Wire Plugs and Connectors
- LG Washer Dryer Combo Legs and Feet
- LG Washer Dryer Combo Brackets and Flanges
- LG Washer Dryer Combo Lights and Bulbs
- LG Washer Dryer Combo Doors
- LG Washer Dryer Combo Knobs
- LG Washer Dryer Combo Panels
- LG Washer Dryer Combo Handles
- LG Washer Dryer Combo Grilles and Kickplates
Popular LG Washer Dryer Combo Models
Below are the most popular LG Washer Dryer Combo models we have. Enter your model number in the search box to find your model.
- DLE1101W 7.3 Cu. Ft. Ultra Large Capacity Dryer With Sleek Contemporary Design (Electric)
- WM3997HWA 4.3 Cu. Ft. All-In-One Washer And Dryer Combo.
- WM3997HWA LAUNDRY CENTER
- WM3997HWA LAUNDRY CENTER
- DLEX3570V 5.3 Total Capacity Lg Twinwash Bundle With Lg Sidekick And E
- WKEX200HBA Washer-Dryer
- DLEX3570W 5.5 Total Capacity Lg Twinwash Bundle With Lg Sidekick And E
- WM3455HW 24-Inch Compact Washer / Dryer Combo
- DLGX3571W 5.3 Total Capacity Lg Twinwash Bundle With Lg Sidekick And G
- DLE3500W Washer-Dryer
- WM3488HW 2.3 Cu.Ft. Compact All-In-One Washer/Dryer
- DLE7300WE 27 Inch Smart Electric Dryer With Easyload
- DLE3400W Washer-Dryer
- WKEX200HWA Washer-Dryer
- DLEX3700V Washer-Dryer
- WM3477HW FRONT LOADING COMBO
- DLE7300VE Washer-Dryer
- DLEX3700W Washer-Dryer
- WM9000HWA 6.2 Total Capacity Twinwash Bundle With Sidekick And Electri
- DLG3401W Washer-Dryer