Models > WM3477HW

WM3477HW LG Washer Dryer Combo - Overview

Sections of the WM3477HW

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Washing Machine Drain Pump and Motor Assembly – Part Number: 4681EA2001T
Washing Machine Drain Pump and Motor Assembly
★★★★★
★★★★★
(236)
PartSelect #: PS3579318
Manufacturer #: 4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
$55.81
  In Stock
Water Inlet Valve - Hot – Part Number: 5220FR2006H
Water Inlet Valve - Hot
★★★★★
★★★★★
(78)
PartSelect #: PS3527427
Manufacturer #: 5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow...
$23.24
  In Stock
Rear Tub Gasket – Part Number: 4036ER2004A
Rear Tub Gasket
★★★★★
★★★★★
(15)
PartSelect #: PS3522855
Manufacturer #: 4036ER2004A
If you notice your washing machine is leaking water from the top of the transmission, it might be due to the gasket being damaged or worn down. When replacing your gasket, consider replacing your tub ...
$29.44
  In Stock
Washer Tub Bearing, Rear – Part Number: MAP61913707
Washer Tub Bearing, Rear
PartSelect #: PS11711138
Manufacturer #: MAP61913707
This tub bearing is for washers. Tub bearing supports the spin basket shaft at the tub. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
$31.06
  In Stock
Door Lock Assembly – Part Number: EBF49827801
Door Lock Assembly
★★★★★
★★★★★
(22)
PartSelect #: PS3533609
Manufacturer #: EBF49827801
The door lock assembly is a part for your washing machine and tells the washer that the door is closed and locked into place. If the switch has shorted out and not locking, it is no longer delivering ...
$61.87
  In Stock
BEARING,BALL – Part Number: 4280EN4001C
BEARING,BALL
★★★★★
★★★★★
(4)
PartSelect #: PS7785069
Manufacturer #: 4280EN4001C
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, th...
$45.42
  In Stock
Locking Pin – Part Number: 4774FR3118B
Locking Pin
★★★★★
★★★★★
(2)
PartSelect #: PS3523451
Manufacturer #: 4774FR3118B
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made ent...
$10.75
  In Stock
Pump Filter – Part Number: 383EER2001A
Pump Filter
★★★★★
★★★★★
(8)
PartSelect #: PS3522306
Manufacturer #: 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your wa...
$28.13
  In Stock
CAP,DRAIN HOSE – Part Number: 5006EN3015A
CAP,DRAIN HOSE
★★★★★
★★★★★
(3)
PartSelect #: PS3635866
Manufacturer #: 5006EN3015A
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$6.10
  In Stock
Clamp – Part Number: 4861FR3068A
Clamp
PartSelect #: PS3524032
Manufacturer #: 4861FR3068A
$9.15
  In Stock
Hose,Connector – Part Number: 5214FR4006G
Hose,Connector
★★★★★
★★★★★
(1)
PartSelect #: PS3527289
Manufacturer #: 5214FR4006G
This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle...
$12.13
  In Stock
Bolt Assembly – Part Number: 4040FR4051C
Bolt Assembly
PartSelect #: PS3522868
Manufacturer #: 4040FR4051C
  No Longer Available

Questions And Answers for WM3477HW

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Felixberto
    April 2, 2022
    Drum does not move at all and "error code le" appears. Tried to disconnect the power supply for more than 30mins several times but still the same problem. Could it be motor or the main control board causing the problem or both? It will be much appreciated also if you can send a me please complete spare parts list. Thank you.
    For model number WM3477HW
    Hello Felixberto. Thank you for the question. The Parts lists is on the site, just enter the model umber of the appliance. The LE error code indicates that the motor is locked, possibly due to a heavy wash load. If the Load is not too heavy, the motor (Stator) may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the WM3477HW

      [Viewing 13 of 13]
      Will not drain
      Fixed by
      these parts
      Show All
      Leaking
      Fixed by
      these parts
      Show All
      Noisy
      Fixed by
      these parts
      Show All
      Will not stop filling with water
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Shakes and moves
      Fixed by
      these parts
      Show All
      Pumps but will not spin
      Fixed by
      these parts
      Show All
      Lid or door won’t close
      Fixed by
      these parts
      Show All
      Will not fill with water
      Fixed by
      these parts
      Show All
      Lid or door will not open
      Fixed by
      these parts
      Show All
      Engine runs but does not pump water
      Fixed by
      these parts
      Show All
      No hot or cold water
      Fixed by
      these parts
      Show All
      Burning smell
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Washing maching wouldn't drain
      Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
      Parts Used:
      Washing Machine Drain Pump and Motor Assembly
      • Jorge from Apple Valley, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers
      539 of 683 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      noisy operation, sometimes did not drain, gave OE code
      Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.
      Parts Used:
      Washing Machine Drain Pump and Motor Assembly
      • Michael from RALEIGH, NC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      40 of 48 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Door locking mechanism
      I received the locking device. I received an email from parts select with a repair video link. I watch the video and repeated the steps. Very easy and educational. Thank you for simplifying something I have limited experience doing.
      Parts Used:
      Door Lock Assembly
      • Aaron from SAN ANTONIO, TX
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      23 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!