LG Washer Dryer Combo Ducts and Vents

Your Price

$10.70

PartSelect Number PS3535020

Manufacturer Part Number MCQ41502701

This is a pump bracket damper for models of LG washing machines. This damper is used to protect the pump within the washer from excessive vibration damage during the washing cycle. If your washing machine is vibrating or making an excessive amount of noise during the cycle, these dampers could be worn out and in need of replacement. This damper is made of rubber and measures approximately 1 inch long and 1 inch wide. Replacing this damper will require you to access the underside of the washer, or wherever the pump location is for your model. This OEM damper is sold individually, and most washers use 2-3 of these dampers for the pump bracket, so consider how many you need before ordering.

Your Price

$36.85

LG Washer Dryer Combo Cover Filter

PartSelect Number PS3634953

Manufacturer Part Number 3550EL2004B

This is a lint filter guide cover for models of LG dryers. This guide cover is installed over the lint filter housing within your dryer and ensures that the lint filter is secured during the drying cycle and can be removed afterward. This cover guide measures approximately 15 inches long and 3.75 inches wide and is made of durable plastic that features two securing holes on either side of it that fasten it within your dryer. To replace this OEM guide cover, you will need a Philips-head screwdriver to remove and install it. This guide cover is sold individually and does not include the necessary securing screws.

Installation Instructions

JOSEPH from MANHASSET, NY

Broken link vet flap

Removed the old vent trap 3 screws total and replaced the new very quick and easy. Read more...

Your Price

$15.00

LG Washer Dryer Combo Damper

PartSelect Number PS8752496

Manufacturer Part Number MCQ62786001

This is a rubber bumper made for LG dryers. This bumper is installed on the inside of the dryer door to ensure the metal door does not bend or get damaged when you close it, and ensures a barrier is between the two pieces of metal when the dryer is spinning quickly. To replace this bumper, you will need a Philips-head screwdriver or drill bit. This bumper is a genuine OEM part and is sold individually, so if your dryer door requires multiple bumpers, consider that before ordering.

Videos!

Your Price

$80.82

LG Washer Dryer Combo Side Venting Kit

★★★★★

6 Reviews

PartSelect Number PS3575086

Manufacturer Part Number 3911EZ9131X

This dryer side vent kit lets you vent the exhaust to the side or bottom of your dryer instead of the default rear position. Included in the kit are 2 straight aluminum foil outlet ducts, each 4 inches wide, along with 1 duct elbow, 1 cover plate, 1 screw, and an instruction sheet. This is helpful for flexible installation in areas where rear venting is not possible or practical. All parts are genuine replacements from their original manufacturer.

Installation Instructions

ROBERT from DAWSONVILLE, GA

Install aftermarket side vent kit

I did as I was told (by my wife). Bought the machine from Home Depot - no side vent kit - had them complete the installation today when the kit came. Read more...