LG Refrigerator Dispensers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos

Popular LG Refrigerator Dispensers
Ice Dispenser Lever
PartSelect Number PS7786148
Manufacturer Part Number ABH74219702
Installation Instructions
Ralph D from EOLIA, MO
Ice dispenser continued to dispense ice unless I turned it off all together
Removed the section of refrigerator that dispenses ice and water. Necessary to pry with object that does not scratch like plastic scraper. Then pull out and replace the switch Micro -- only has one Phillips screw holding switch. Replaced the dispenser and snapped on the New button assembly I broke and job was done. Works perfectly now..
Read more...
Dispenser Front Panel
PartSelect Number PS3628053
Manufacturer Part Number MCK66542801
Installation Instructions
MARK from CLAREMORE, OK
The water dispenser lever came off, due to broken tabs in the door panel.
Before you begin, I'd recommend unplugging the refrigerator. You have to slip the putty knife in around the edge of the dispenser panel and carefully release the tabs all the way around and the entire panel pulls straight out. There are three wiring harnesses to unplug. You'll have to remove several screws and release the tabs around the electronic panel and remove it from the main panel. It's a good idea to take note or even pictures of how the ice and water actuators are positioned on the panel, so you get them situated properly on the new panel. If the ice actuator is not fit correctly on a knob that sticks up it may dispense ice all the time (happened to me). After you transfer the actuators to the new panel and the ice and water dispensing levers, you can re-attach the electronic panel on the left side. make sure all of the wiring harnesses are plugged in and the wires situated out of the way, then re-install the panel by pushing it straight back in. Plug the refrigerator in and test it out.
Read more...
Dispenser Funnel
PartSelect Number PS3517829
Manufacturer Part Number 3016JA2002M
NOTE: As per manufacture, due to the update in design you must also order the funnel frame.
Installation Instructions
James from Englewood, FL
Sticking Ice dispenser
After checking the prices of new refrigerators, I decided that I had nothing to lose trying to repair the sticking ice/water dispenser. I followed the previous instructions by prying off the panel with a screwdriver working my way around. Some effort is needed, but it will come loose before it breaks. You should remove the funnel first. If you have an older model, the funnels are fragile and should come out with a gentle back and forth jiggle. I broke mine. After pulling the face off the frig,I noticed that the plastic piece the activates the dispenser was partially out of its cradle in the rubber piece. Apparently pushing too hard on it can dislodge this piece and cause the unit to stick. Check this out before going for a new actuator. It only took a few minutes to clean and reassemble and reinstall. Works perfectly. Received new funnel and it was different than the one I took out. I missed the note that said if you order the funnel, you should also get the bracket to be sure they go back together. Two lessons learned. Don,t be afraid of this repair and don't push too hard on the dispenser.
Read more...
Ice Chute Door - Heated
PartSelect Number PS3525879
Manufacturer Part Number 5007JA3006R
Fixes these symptoms
- Door won’t open or close
- Ice maker won’t dispense ice
- See more...
Installation Instructions
Wesley from WILTON, NH
Ice dispenser door didn't close
I replaced solenoid, flapper heated door, and broken spring. Very easy instructions on "YouTube"
Read more...
SOLENOID ASSEMBLY
PartSelect Number PS3598227
Manufacturer Part Number 6421JB2002R
Fixes these symptoms
- Ice maker won’t dispense ice
- See more...
Installation Instructions
Toai from Monroe, WA
The ice maker door stay open. And not close back.
So easy that my 13 years old son replaced it.
Read more...
Funnel
PartSelect Number PS3535190
Manufacturer Part Number MDR42967401
Installation Instructions
Amy from GREAT FALLS, MT
The water dispenser was broken
Removed cover assembly/dispenser, disconnected wiring harness for old cover assembly. Connected wiring harness to new cover/assembly and installed new cover assembly.
Read more...
Related Parts
- All LG Refrigerator parts
- LG Refrigerator Caps and Lids
- LG Refrigerator Circuit Boards and Touch Pads
- LG Refrigerator Drawers and Glides
- LG Refrigerator Hardware
- LG Refrigerator Hinges
- LG Refrigerator Hoses and Tubes
- LG Refrigerator Ice Makers
- LG Refrigerator Knobs
- LG Refrigerator Lights and Bulbs
- LG Refrigerator Motors
- LG Refrigerator Seals and Gaskets
- LG Refrigerator Sensors
- LG Refrigerator Springs and Shock Absorbers
- LG Refrigerator Trays and Shelves
- LG Refrigerator Wheels and Rollers