KitchenAid Garbage Disposer Parts
Find your partEnter your model number or a part number and click "Search"
Popular KitchenAid Garbage Disposer Parts
PartSelect Number PS11742344
Manufacturer Part Number WP4211334The splash guard, also known as a mounting gasket, is used for garbage disposals. The splash guard creates a watertight seal between the sink flange and the garbage disposal ring. The rubber cover covers the top of the sink drain and it opens in the center to allow water and food particles into the garbage disposal while keeping liquids and food from splashing out or back into the sink. This should fix any issue or symptom of garbage coming back out of your sink. Refer to the manufacturer-approved instructional diagram for installation and accurate guidance.
Fixes these symptoms
- Garbage comes back up sink
- See more...
Richard from CENTERVILLE, UT
Worn out splash guardAsk my grandson to replace it. He’s a genius. He used hammer to release the disposer circular latch. He then removed the old splash guard and installed the new one. Love him Read more...
Sink Flange Gasket/Seal
PartSelect Number PS11742343
Manufacturer Part Number WP4211302
PartSelect Number PS11743008
Manufacturer Part Number WP596669This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
jeff from lindenhurst, IL
Washing Machine was leaking waterLoosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years old and this was the first problem--hopefully it is now good for another 20 years! Read more...
Inner Stopper Gasket
PartSelect Number PS357412
Manufacturer Part Number 4211355
George E. from Marysville, WA
worn out gasketinstalled new gasket by hand. Read more...
PartSelect Number PS12070623
Manufacturer Part Number W11087190This is a flexible rubber cover that is over the top of the sink drain. It keeps liquids and smaller food particles from splashing back into the sink.
PartSelect Number PS357379
Manufacturer Part Number 4211317This is a tailpipe, but you may also know it as a drain pipe, and it is compatible with your garbage disposal. The most common reason for needed to replace this part is if it is damaged and leaking. This piece measures about 5 inches long, 3 inches high, and 2 inches wide, and it is black in color. The purpose of this piece is to aid with the drainage in your garbage disposal plumbing unit. If your tailpipe is damaged this is the OEM replacement part you will need.
PartSelect Number PS357363
Manufacturer Part Number 4211300The stopper, also known as a splash guard, is located over the top of a sink drain and garbage disposal unit. With a hole in the center, the stopper will allow water and food items to go into garbage disposal while keeping liquids and smaller food particles from splashing back up into the sink. It is normal for this part to wear out eventually from use, but it is important to replace if you notice garbage coming up to the surface of your sink. The stopper is a flexible rubber cover and it comes in black. Refer to the manufacturer-approved installation diagram for further instruction.
PartSelect Number PS357521
Manufacturer Part Number 4211615This is a black flexible rubber cover that is over the top of the sink drain, used for your food waste disposer. It keeps liquids and smaller food particles from splashing back into the sink. The splash guard can become worn out over time and may need to be replaced. Make sure to disconnect the power before beginning your repair. This part is 3.75 inches in length, 3.75 inches in width, 0.75 inches in height and weighs 0.119 lbs. Remove the drain pipe from the disposal, and turn the mounting ring. Remove the old cover with a screwdriver and place the new one into place.
Popular KitchenAid Garbage Disposer Models
Below are the most popular KitchenAid Garbage Disposer models we have. Enter your model number in the search box to find your model.