KCDB250G3 KitchenAid Food Waste Disposer - Overview

This is a black flexible rubber cover that is over the top of the sink drain, used for your food waste disposer. It keeps liquids and smaller food particles from splashing back into the sink. The splash guard can become worn out over time and may need to be replaced. Make sure to disconnect the power before beginning your repair. This par...Read moret is 3.75 inches in length, 3.75 inches in width, 0.75 inches in height and weighs 0.119 lbs. Remove the drain pipe from the disposal, and turn the mounting ring. Remove the old cover with a screwdriver and place the new one into place.

The stopper, also known as a splash guard, is located over the top of a sink drain and garbage disposal unit. With a hole in the center, the stopper will allow water and food items to go into garbage disposal while keeping liquids and smaller food particles from splashing back up into the sink. It is normal for this part to wear out event...Read moreually from use, but it is important to replace if you notice garbage coming up to the surface of your sink. The stopper is a flexible rubber cover and it comes in black. Refer to the manufacturer-approved installation diagram for further instruction.

This hardware installation kit may also be known as a garbage disposal installation kit, and is used in conjunction with your garbage disposal. This hardware kit contains all five of the parts you will need in order to install your appliance. Using the instructions in the garbage dispoal manual, and the pieces included in this assembly, y...Read moreou can install your appliance with ease. For more information on what pieces are included in the kit please see the image provided. This is an OEM part sourced directly from the manufacturer.