Jenn-Air Refrigerator Tanks and Containers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jenn-Air Refrigerator Tanks and Containers
Your Price
$106.87
In Stock
Jenn-Air Refrigerator Reservoir
PartSelect Number PS12712108
Manufacturer Part Number W11346622
Introducing the Whirlpool Refrigerator Water Reservoir. This genuine OEM part features a water tank tubing assembly with a water filter head & by-pass, designed to hold and chill water for the dispenser in Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef fridges. This assembly is versatile, functioning efficiently with several models from these brands. Be sure to verify compatibility with your specific model by checking your parts diagram. It's also vital to disconnect the power and water supply to your refrigerator before installation to ensure safety. Remember to utilize work gloves during installation to guard your hands.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Your Price
$119.74
In Stock
Jenn-Air Refrigerator Ice Bucket
Removing and replacing the ice maker was fairly straight forward. Tight quarters to work in, but managable.
1. With the freezer turned off, uplug the ice maker power cable at the back of the freezer.
2. Remove the four phillips head screws and ice bucket rail to the side of the freezer. I found it was easier to re-install the new ice maker with the rail clear off.
3. Loosen the two upper hex head screws holding the ice maker (requires a nut driver).
4. Lift the ice maker up and off of the upper screws.
5. With the ice maker out of the freezer, remove the power cable from the old ice maker and re-install on the new ice maker. At this point, both the front cover and the on/off lift bar can be transfered from the old ice maker to the new one.
6. Slip the new ice maker down over the two upper screws making sure the lower mounting tab is behind the ice bucket rail. Make sure the hole on lower mounting tab lines up with screw hole.
7. Re-install the ice bucket rail and tighten all screws. Make sure the water supply tube is lined up correctly feeding into the ice maker.
8. Re-connect ice maker power cable at the back of freezer and turn freezer back on.
It took about 4 hours for the first ice to generate. It cycled normally after that. No more leaks or ice globs in the ice bucket. Read more...
PartSelect Number PS11743653
Manufacturer Part Number WP67005959
Bucket only.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- See more...
Installation Instructions
Stanley from Cortland, OH
Ice maker was leaking water and causing ice globs in ice bucket.
Parts were available at the locat applicance store, but the cost was 20-25% higher than ordering through Parts Select (including shipping) + it was delivered in 3 days right to the house.Removing and replacing the ice maker was fairly straight forward. Tight quarters to work in, but managable.
1. With the freezer turned off, uplug the ice maker power cable at the back of the freezer.
2. Remove the four phillips head screws and ice bucket rail to the side of the freezer. I found it was easier to re-install the new ice maker with the rail clear off.
3. Loosen the two upper hex head screws holding the ice maker (requires a nut driver).
4. Lift the ice maker up and off of the upper screws.
5. With the ice maker out of the freezer, remove the power cable from the old ice maker and re-install on the new ice maker. At this point, both the front cover and the on/off lift bar can be transfered from the old ice maker to the new one.
6. Slip the new ice maker down over the two upper screws making sure the lower mounting tab is behind the ice bucket rail. Make sure the hole on lower mounting tab lines up with screw hole.
7. Re-install the ice bucket rail and tighten all screws. Make sure the water supply tube is lined up correctly feeding into the ice maker.
8. Re-connect ice maker power cable at the back of freezer and turn freezer back on.
It took about 4 hours for the first ice to generate. It cycled normally after that. No more leaks or ice globs in the ice bucket. Read more...
Your Price
$156.16
In Stock
Jenn-Air Refrigerator Water Tank Assembly With Bypass Plug
PartSelect Number PS11738655
Manufacturer Part Number WP12956202
We understand how important it is for your dishwasher to work smoothly and effectively, which is why we're here to introduce you to GE's essential Bottle Washer Clip. This handy little accessory is designed to quickly and easily attach to your dishwasher's upper dishrack. But why do you need it? Here's the answer? this clip keeps your bottles perfectly stable during every wash cycle. Say goodbye to annoying rattles or half-cleaned bottles, this clip ensures your dishwasher operates smoothly and leaves your bottles sparkling clean, just as if your appliance were brand new. Installation is a breeze? simply follow the guidelines you'll find in your user manual, and you'll have your appliance back in top-notch in no time. This clip isn't just a replacement piece, it's a handy solution for ensuring your dishwasher keeps delivering peak performance. In other words, it's not just about fixing your dishwasher, it's about optimizing it. The GE Bottle Washer Clip?Taking the guesswork out of dishwasher maintenance and making your life easier. Isn't it time to make your dishwasher work for you?
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Jodi from St. Clair Shores, MI
leaking at tube where water filter is
you snap out old part pull waterline out of tube going down to the back and unplug tube on top connection ,,that was tricky ,,revirce for new part but you guy should make the water tube attachment on the water line match what is out there that you buy at the stores .I had to go back 3 times to get the right part to get my water line to connect with yours ..
Read more...
Your Price
$111.82
In Stock
Jenn-Air Refrigerator Reservoir
PartSelect Number PS3654989
Manufacturer Part Number W10502642
This water reservoir and filter head assembly is a genuine replacement component designed for use in select refrigerators. It stores chilled, filtered water for the dispenser, allowing water to flow from the main supply line, through the filter, into the reservoir where it is cooled by the appliance’s internal coils. When the dispenser lever is pressed, the water is released for use. This part is commonly replaced when the refrigerator fails to dispense water or shows signs of leaking around the reservoir area. Installation requires unplugging the appliance and shutting off the water supply to ensure safety. Compatibility should be confirmed by checking the model number before purchase.
Fixes these symptoms
- Not dispensing water
- See more...
Installation Instructions
Jeffery from RUSTON, LA
Had to replace the water reservoir on my refrigerator
The replacement part provided was not an exact replacement. The part did not include a water reservoir. Instead, it had a 25 ft long water line that ran from the water filter to the water connection behind the fridge. The long water line was difficult to deal with, did not fit easily into the space provided for the water reservoir, and is coiled up behind my fridge. The part did work, but I'm unhappy with not having the resevoir.
Read more...
Your Price
$76.72
In Stock
Jenn-Air Refrigerator Water Reservoir
PartSelect Number PS12578586
Manufacturer Part Number W11229977
The water reservoir holds the water for the water dispenser as the water chills.
Your Price
$76.58
On Order
Jenn-Air Refrigerator Water Reservoir Tubing
PartSelect Number PS11751727
Manufacturer Part Number WPW10276792
NOTE: As per manufacture this is no longer a tank. The tank style has been updated with coiled tubing.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Your Price
$39.09
Special Order
Jenn-Air Refrigerator Insulation, Tank
PartSelect Number PS17629513
Manufacturer Part Number W11714300
Your Price
$114.79
Special Order
Your Price
$67.27
In Stock
Jenn-Air Refrigerator Reservoir
PartSelect Number PS12348075
Manufacturer Part Number W11168758
Introducing the RESERVOIR, a crucial component for your Whirlpool appliance collection. This reservoir is an invaluable genuine OEM part, compatible with a range of Whirlpool refrigerator models. Specifically designed to safeguard your refrigerated water supply, this reservoir dutifully and securely holds and chills the lifeline of your hydration hub. As a significant safety measure, it is highly recommended to disconnect your refrigerator from both power and water source prior to installing this part, remember to always put on work gloves to guard your hands. Experience peace of mind knowing your part is built to perfect size and shape for seamless functioning. Always prioritize verifying the compatibility with your model before making your purchase. This Whirlpool RESERVOIR is devoted to ensuring the longevity and freshness of your dispenser's water reserve, marking an era of worry-free chilled water experience in your home.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Luke from Jewett city, CT
Small water leak from cracked fitting leading into water reservoir fill valve.
Remove some shelving and have a towel handy. Opened water filter door to expose two 1/4” screws. Removed 2 screws. Placed my hands firmly on upper panel and gently pulled/tugged panel forward and slightly down. Disconnected roof lighting clip. Removed panel from frig. Disconnected both ends from solenoid fill valves by pressing in the colored locking piece to release tubing while pulling tube out. Cut zip ties and removed old leaking reservoir. I also removed the straight reservoir seeing as the part I replace was redesigned and the other one was not needed. Put new zip ties in place. Slid the new part into position and pressed the ends into the solenoid valves. You do not need to press in colored locking pieces, they will self lock. Secured with zip ties. Grabbed a container and filled it up with water through the door to fill and purge and check for leaks. Reconnect light clip, reinstalled top liner and snapped into place. Put screws in. Closed filter door. Took about 15 minutes. I did watch a you tube video prior to attempting this repair myself.
Read more...
Your Price
$87.71
In Stock
Jenn-Air Refrigerator Reservoir-water
PartSelect Number PS16731141
Manufacturer Part Number W11603843
Related Jenn-Air Refrigerator Parts
- All Jenn-Air Refrigerator parts
- Jenn-Air Refrigerator Brackets and Flanges
- Jenn-Air Refrigerator Caps and Lids
- Jenn-Air Refrigerator Circuit Boards and Touch Pads
- Jenn-Air Refrigerator Compressors
- Jenn-Air Refrigerator Deflectors and Chutes
- Jenn-Air Refrigerator Dispensers
- Jenn-Air Refrigerator Doors
- Jenn-Air Refrigerator Drawers and Glides
- Jenn-Air Refrigerator Ducts and Vents
- Jenn-Air Refrigerator Elements and Burners
- Jenn-Air Refrigerator Fans and Blowers
- Jenn-Air Refrigerator Filters
- Jenn-Air Refrigerator Grilles and Kickplates
- Jenn-Air Refrigerator Handles
- Jenn-Air Refrigerator Hardware
- Jenn-Air Refrigerator Hinges
- Jenn-Air Refrigerator Hoses and Tubes
- Jenn-Air Refrigerator Ice Makers
- Jenn-Air Refrigerator Insulations
- Jenn-Air Refrigerator Knobs
- Jenn-Air Refrigerator Lights and Bulbs
- Jenn-Air Refrigerator Manuals and Literatures
- Jenn-Air Refrigerator Motors
- Jenn-Air Refrigerator Panels
- Jenn-Air Refrigerator Seals and Gaskets
- Jenn-Air Refrigerator Sensors
- Jenn-Air Refrigerator Switches
- Jenn-Air Refrigerator Thermostats
- Jenn-Air Refrigerator Trays and Shelves
- Jenn-Air Refrigerator Trims
- Jenn-Air Refrigerator Valves
- Jenn-Air Refrigerator Wheels and Rollers
- Jenn-Air Refrigerator Wire Plugs and Connectors